MS in Mechanical Engineering - Thesis Guidelines
Students may choose to pursue a thesis as part of their MS degree program, but only with the consent of a faculty advisor willing to supervise the thesis work.
Preparation of a thesis representing an independent research work is a pivotal phase of this MS degree program. It provides the student with an opportunity to work on an open-ended problem, developing a particular solution that is not pre-determined and involving synthesis of knowledge and intellectual creativity. The thesis may involve an investigation that is fundamental in nature, or may be applied, incorporating theory, experimental testing and/or analytical modeling, and/or creative design. Through the thesis, candidates are expected to give evidence of competence in research and a sound understanding of the area of specialization involved. Students are also strongly encouraged to present their research at scientific conferences and publish the results of their thesis research in a peer-reviewed journal.
Students receive a grade of Y (incomplete) in these courses as long as the thesis in progress. Eventual thesis grades replace the incomplete grades upon formal completion of the thesis. In order to receive a grade of Y for ME-0296, students must submit a thesis prospectus that outlines the area of work, thesis goals, proposed approach and a review of relevant past work in the literature before the end of the first semester in which the student enrolls in ME-0296, typically the third semester of full-time study. An example of a recent MS thesis prospectus can be found in the Mechanical Engineering office.
The examining committee for MS candidates completing theses should be composed of three (3) members.
- Thesis advisor (committee chair)
- One technical expert outside of the ME department
- A third member of the committee, often another faculty member in the ME department
The committee chair is normally a full-time, tenure-track faculty member. One committee member must be from outside the ME department. Thesis normally counts as 9 credits towards the MS degree requirements. However, a student, with the approval of his/her thesis advisor, has the option to complete a 6-credit thesis by submitting a petition form to the Department. This petition must be signed by the student and the thesis advisor and will become part of the student's academic record. With a 6-credit thesis, a student must complete an extra graduate-level course (for a total of 8 courses) to fulfill the 30-credit requirement for graduation. This option is not typically available to those intending to pursue a Ph.D. degree.
Thesis Completion
The MS thesis is completed upon:
- A successful oral defense (open to the community)
- Submittal of an approved thesis to the Office of Graduate Studies
The student should consult the Graduate Student Handbook for specific dates and deadlines for this process in the graduation semester.
Edinburgh Research Archive
- ERA Home
- Engineering, School of
Engineering thesis and dissertation collection
By Issue Date Authors Titles Subjects Publication Type Sponsor Supervisors
Search within this Collection:
Recent Submissions
Development and modelling of sustainable polymer–based membranes for gas separation and packaging , holographic single photon lidar for adaptive 3d imaging , operational data mining for offshore wind farm maintenance , dynamics of rigid and soft particles in a cross-slot flow at finite inertia , using machine learning for long-term track bed behaviour analysis and maintenance scheduling optimisation , developing a multi-scale parallelised coupled system for wave-current interactions at regional scales , uav-aided hybrid rf-optical wireless networks , turbulence in real-sea conditions and its impacts on tidal energy devices , investigating the role of mechanical and structural properties of scaffolds for cartilage tissue engineering , additive manufacturing of polyaniline-based electrodes for energy storage and memristive devices , modelling and optimisation of monolithic solid-to-gas heat exchangers , nanostructured metal-organic frameworks with exceptional thermal and hydrothermal stability: synthesis, characterisation and applications in environmental remediation , water tunnel testing of highly-cambered plates and wings for downwind yacht sail applications , impedance-optical dual-modal imaging for tissue engineering , deep learning-enhanced 3d direct time-of-flight imaging , radical innovation for the wave energy sector: an investigation of the potential of direct conversion as an enabling technology , data-driven and machine learning-based approaches for mobile indoor positioning , intelligent ultrasound hand gesture recognition system , techno-economic assessment of solar panel integration onto a wave energy converter , reliable indoor optical wireless communication in the presence of fixed and random blockers .
Graduate Academic Policies
Steps to Submit Your Thesis/Dissertation
- Defense & revision: The thesis, dissertation, or senior honors thesis must be successfully defended before the faculty committee, and the student should make any required revisions. You must also pass the formatting of the manuscript by Miranda Vernon-Harrison.
- Approval Form: The student and/or the student’s advisor must collect signatures from the student and all committee members on the Written Thesis / Dissertation Approval Form
- Please e-mail the signed Thesis/Dissertation Approval form to Miranda Vernon-Harrison at mavernon-harrison [at] uh.edu . ATTENTION: You MUST CC: your committee chair and graduate advisor on this e-mail.
- The completed form will be signed by the Associate Dean for Graduate Studies for the College after document review and submitted to the Graduate School. You have no further responsibility regarding the form once you submit it to the college.
- The College of Engineering requires that a bound copy of each thesis/dissertation/senior honors thesis be presented to the student’s department and committee chair, unless the committee chair emails Miranda Vernon-Harrison stating otherwise. Email Miranda Vernon-Harrison ( mavernon-harrison [at] uh.edu ( mavernon-harrison[at]uh[dot]edu ) ) to schedule an appointment to drop off your printed hardcopies for binding at the Engineering Building 2, E421. The document should be printed prior to dropping off. The student will need to print single-sided on a minimum of 25% white cotton paper. The weight of the paper should be at least 20 lb. ( Details on paper requirements ) The student's myUH account will be charged for binding.*The student can also submit binding for personal copies. Binding will be returned back to Miranda Vernon-Harrison for distribution.
- Electronic submission: Master’s theses and doctoral dissertations must be submitted electronically to the Electronic Thesis and Dissertation Submission and Management System (ETD) for official archiving. This step is a required part of the degree completion process; degrees will not be conferred if the thesis/dissertation is not uploaded. Convert your official manuscript to a PDF (Portable Document File). Upload manuscript to the ETD website . *Committee chair must approve the submission.
Submitting a hardcopy and uploading a digital copy of the thesis/dissertation remains a MANDATORY part of the process; your degree will not be released until this is done.
Once approved by the college, PhD students, Master thesis students, and Honors thesis students must (1) schedule an appointment to submit your final, printed copies for binding to Miranda Vernon-Harrison (Engineering Building 2, E421) (2) email the signed Thesis/Dissertation Approval Form to mavernon-harrison [at] uh.edu . Please cc: this e-mail to your committee chair and graduate advisor.
Once approved by the college, PhD and Master thesis students must upload the document as a PDF to the Vireo system https://uh-etd.tdl.org/ . *Committee chair must approve the submission.
For Doctoral candidates , Complete the Survey of Earned Doctorates and email a copy of the certificate to Miranda Vernon-Harrison. https://sed-ncses.org/
If you have any questions about these college procedures, please contact Miranda Vernon-Harrison: mavernon-harrison [at] uh.edu
- Spring 2024 Thesis and Dissertation Presentation (pdf file)
- Guide : The Dean's Office publishes a document containing guidelines for theses and dissertations. You are advised to obtain a copy of these guidelines in advance of beginning to write a thesis or dissertation. Download Guide (pdf file) (Some departments have additional requirement, refer to your departmental web site or contact your graduate admissions office for additional requirements and deadlines.)
- Checklist : Thesis and Dissertation Checklist (pdf file) Special Note - All students must apply for graduation by the deadline date of the semester in which the degree is posted!
- Submission Form : Thesis/Dissertation Binding Form (pdf file) Students must be enrolled in the semester in which they graduate.
Updates for Theses and Dissertations
Starting in Fall 2019, graduate students should use the new UHGS Written Thesis/Dissertation Approval Form. The thesis and dissertation committee members will no longer sign a signature page when they approve the thesis or dissertation. Instead, committee members will sign an approval form, stating that they have read and examined the manuscript. The committee members will certify that it is adequate in scope and quality as a thesis/dissertation for a graduate degree and indicate their approval or disapproval of the content prior to being submitted to the college/department for processing and acceptance.
Graduate students should use the new UHGS template for the front matter (Title page, Acknowledgements, Table of Contents, etc.) http://www.uh.edu/graduate-school/academics/thesis/
- Front Matter: Front Matter Template (word file)
- Written Thesis/Dissertation Approval Form: Approval Form (pdf file)
Resources for Preparation of Theses and Dissertations
- MathType Guide: MathType for Making and Managing Equations (pdf file)
- Guide for Automatic Reference Numbering: How to use Word for Automatic Reference Numbering (pdf file)
Cullen College of Engineering: Thesis & Dissertation Submission and Binding Requirements
Bs honors thesis requirements.
Graduating BS Honors thesis students are required to follow the procedures in the online guide for preparing and writing their theses. The amount of copies submitted is designated by the student’s advisor, typically ranging from 1-2 copies (Honors College no longer requires a copy). BS students will need to turn in their manuscripts and approval form in to the College Graduate Coordinator for review and final approval. These students need to follow the instructions for paper requirements and submission deadlines for Traditional Binding only. Graduating BS Honors Thesis students are not required to do an electronic submission at this time.
MS Thesis and Dissertation Two Step Submission Process:
Information for all thesis / dissertation students (bs, ms, phd).
Deadline for Submission : To graduate in a given semester, the student must upload their ETD to the Vireo website and notify the coordinator, along with submitting the approved hard copy thesis to the Graduate Associate Dean’s Office (E421) by the appropriate deadline. All documents and payment must be turned in at the time of submission. Any student missing this deadline must enroll and reapply for graduation in the next semester. No extensions will be made.
Fees : The cost of binding starts at $50 per copy for BS, MS, and PhD. Microfilming is no longer required for dissertations. Copyright is free and included in the ETD.
If there are questions or if clarification is needed regarding this two-step process, contact the Director of Graduate Student Affairs: mavernon [at] central.uh.edu (Miranda Vernon-Harrison) , email mavernon-harrison [at] uh.edu (mavernon-harrison[at]uh[dot]edu) .
Early Submission of Thesis or Dissertation (For students who have missed the previous semester’s deadline)
If a student meets all of the requirements for completed submission of thesis or dissertation prior to the last day to add a class in Session 1 (regular academic session) of the academic term, they are eligible to request via petition to have their minimum required enrollment reduced to one credit hour. Such petitions are approved at the discretion of the Associate Dean for graduate studies of the respective college and filed with the Graduate School. Such petitions must be submitted to and approved by the Associate Dean for graduate studies no later than the last day to add classes in Session 1 (regular academic session) of the academic term, as published in the graduate Academic Calendar. Students who meet this early submission deadline and do not submit a petition to request a reduced minimum required enrollment by the last day to add a class in Session 1 (regular academic session) for the academic term are required to remain in the required three credit hours of enrollment.
For international students : If the student is not required to take any additional courses to satisfy the requirements for completion, but continues to be enrolled for administrative purposes, the student is considered to have completed the course of study and must take action to maintain status. A student’s visa will be closed once the thesis or dissertation is submitted. For example, if a student misses the previous semester’s graduation and completes by the first day of the next semester, the student’s completion date will be the date that the thesis or dissertation was submitted. Please contact ISSS for more information at 713-743-5065.
Deadlines to submit the thesis or dissertation to the Engineering Dean’s Office for graduation:
Last updated: March 2024
- Mission & History
- Dean's Office
- Faculty & Staff
- Student Organizations
- Executive Leadership Board
- Faculty Advisory Board
- Engineering Alumni Association
- NAE Members
- Faculty in the NAI
- Academic Advisors
- Faculty Awards and Achievements
- Strategic Plan
- Our Community
- Bylaws and Procedures
- Internal Resources
- ABET Accreditation
- Departments
- Technology Division
- Accreditation
- Academic Policies
- Admissions Contacts and Deadlines
- Certificate Programs
- Interdisciplinary Programs
- Best Dissertation Award
- Online Programs
- Continuing & Professional Education
- Scholarships
- UH Engineering in Katy
- Engineering Academies
- International Joint Institutes
- How to Engineer Your Future, Admissions & More
- Contact + Request Info
- Virtual Tour
- Resources for Current Students
- First-Year Experience
- Engineering Career Center
- Engineering Computing Center
- NAE Grand Challenge Scholars Program
- Virtual Institutes for Cyber and Electromagnetic Spectrum Research and Employ (VICEROY)
- Centers & Institutes
- Faculty Resources
- Sponsored Research Office
- Proposal Timeline
- Funding Opportunities
- Research Computing
- Industrial Relations
- Meet the Faculty
- Student Research
- Research News
- Technology Division Research
- Engineering Program for Innovation and Entrepreneurship (EPIE)
- Women in Innovation
- Opportunities
- How to Give
- Office of Advancement
- Get Involved
- Alumni Events
- Alumni Stories
- Research Experience for Undergrads
- St. Elmo Brady STEM Academy
- Engineering Podcast
- Upcoming Events
- Publications
- Media Coverage
- Keep in Touch!
- Office of Communications
ScholarWorks@UMass Amherst
Home > Engineering > CEE > CE_THESES
Civil Engineering Masters Theses Collection
Theses from 2024 2024.
Machine and Statistical Learning for Sustainable Infrastructure and Mobility Systems , Atanas Apostolov, Civil Engineering
Theses from 2023 2023
The Current State of Practice of Building Information Modeling , Kevin P. Brooks, Civil Engineering
Loads Analysis of Fixed-Bottom and Floating Offshore Wind Structures , Michael G. Davis, Civil Engineering
Comparison Of Scaling Performance Between Sidewalks Placed Using Hot and Cold Weather Concreting Procedures , Likhitha Rudraraju, Civil Engineering
CORRELATION BETWEEN LABORATORY TESTING RESULTS AND IN-SITU SIDEWALK SCALING , Brian R. Shea, Civil Engineering
The Effects of Hurricane Wind Field Characteristics on Wind Blade Loads , Michael S. Tsai, Civil Engineering
Post-Fire Damage Inspection of Concrete Tunnel Structures , James Viglas, Civil Engineering
Theses from 2022 2022
Measuring Accessibility to Food Services to Improve Public Health , Efthymia Kostopoulou, Civil Engineering
Euplectella Aspergillum’s Natural Lattice Structure for Structural Design & Stability Landscape of Thin Cylindrical Shells with Dimple Imperfections , Zoe Y. Sloane, Civil Engineering
Theses from 2021 2021
Post-Fire Assessment of Concrete Tunnel Structures , Nicholas C. Menz, Civil Engineering
Utilizing Unmanned Aerial Vehicles (UAVs) for the Estimation of Beam Corrosion of Steel Bridge Girders , Gabrielle Pryor, Civil Engineering
Parametric Study of Integral Abutment Bridge Using Finite Element Model , Asako Takeuchi, Civil Engineering
Theses from 2020 2020
School Bus Routing To Allow Later School Start Times , Rana Eslamifard, Civil Engineering
QUANTIFICATION OF THERMAL BRIDGING EFFECTS IN COLD-FORMED STEEL WALL ASSEMBLIES , Divyansh Kapoor, Civil Engineering
Theses from 2019 2019
Sustainable Travel Incentives Optimization in Multimodal Networks , Hossein Ghafourian, Civil Engineering
High Fidelity Modeling of Cold-Formed Steel Single Lap Shear Screw Fastened Connections , Rita Kalo, Civil Engineering
Modeling the Effect of New Commuter Bus Service on Demand and the Impact on GHG Emissions: Application to Greater Boston , Christopher Lyman, Civil Engineering
Performance of Concrete Tunnel Systems Subject to Fault Displacement , Michael Morano, Civil Engineering
Behavior of Prestressed Concrete Bridges with Closure Pour Connections and Diaphragms , Gercelino Ramos, Civil Engineering
Analysis of Adhesive Anchorage Systems Under Extreme In-Service Temperature Conditions , Rachel Wang, Civil Engineering
Theses from 2018 2018
Driver Understanding of the Flashing Yellow Arrow and Dynamic No Turn on Red Sign for Right Turn Applications , Elizabeth Casola, Civil Engineering
Evaluating the Impact of Double-Parked Freight Deliveries on Signalized Arterial Control Delay Using Analytical Models and Simulation , Aaron J. Keegan, Civil Engineering
Reward Allocation For Maximizing Energy Savings In A Transportation System , Adewale O. Oduwole, Civil Engineering
Impact of S-Curve on Speed in a Modern Roundabout , Akshaey Sabhanayagam, Civil Engineering
All-Red Clearance Intervals for Use in the Left-Turn Application of Flashing Yellow Arrows , Francis Tainter, Civil Engineering
Theses from 2017 2017
Evaluation of New England Bridges for Bat Roosting Including Methodology and Case Studies , Angela Berthaume, Civil Engineering
Evaluating Variances Between Departments of Transportation in New England to Create a Strategic Transportation Workforce , Chelsea Bouchard, Civil Engineering
Development of High Early-Strength Concrete for Accelerated Bridge Construction Closure Pour Connections , Stephanie Castine, Civil Engineering
I. THE HIGH STRAIN RATE RESPONSE OF HOLLOW SPHERE STEEL FOAM; II. THE DYNAMIC RESPONSE OF AN AMERICAN ELM TREE , Ignacio Cetrangolo, Civil Engineering
Performance of Adhesive and Cementitious Anchorage Systems , Mirna Mendoza, Civil Engineering
Theses from 2016 2016
Integrated Solar Technologies with Outdoor Pedestrian Bridge Superstructure Decking , Richard K. Racz, Civil Engineering
LIVE LOAD DISTRIBUTION FACTORS FOR HORIZONTALLY CURVED CONCRETE BOX GIRDER BRIDGES , Mohammed Zaki, Civil Engineering
Theses from 2015 2015
Bonded Anchors in Concrete Under Sustained Loading , Douglas Droesch, Civil Engineering
An Observational Evaluation of Safety Resulting from Driver Distraction , Christina M. Dube, Civil Engineering
Measuring the Resilience of Transportation Networks Subject to Seismic Risk , Mark N. Furtado, Civil Engineering
Nano-Scale Investigation of Mechanical Characteristics of Main Phases of Hydrated Cement Paste , Shahin Hajilar, Civil Engineering
Driver Behavior Evaluation of Variable Speed Limits and a Conceptual Framework for Optimal VSL Location Identification , Curt P. Harrington, Civil Engineering
A Real-time Signal Control System to Minimize Emissions at Isolated Intersections , Farnoush Khalighi, Civil Engineering
Structural Vulnerability Assessment of Bridge Piers in the Event of Barge Collision , David A. Ribbans, Civil Engineering
Towards Sustainable Roundabouts: An Evaluation of Driver Behavior, Emissions, and Safety , Derek Roach, Civil Engineering
Resilience of Transportation Infrastructure Systems to Climatic Extreme Events , Alexandra C. Testa, Civil Engineering
Theses from 2014 2014
Short and Long-term Performance of a Skewed Integral Abutment Prestressed Concrete Bridge , Rami Bahjat, Civil Engineering
Performance of Circular Reinforced Concrete Bridge Piers Subjected to Vehicular Collisions , Nevin L. Gomez, Civil Engineering
Field and Analytical Studies of the First Folded Plate Girder Bridge , Man Hou Sit, Civil Engineering
Theses from 2013 2013
The Effect of Roadside Elements on Driver Behavior and Run-Off-the-Road Crash Severity , Cole D. Fitzpatrick, Civil Engineering
Evaluating At-Grade Rail Crossing Safety along the Knowledge Corridor in Massachusetts , Timothy P. Horan, Civil Engineering
An Evaluation of Alternative Technologies to Estimate Travel Time on Rural Interstates , Qiao Li, Civil Engineering
Operational and Safety-based Analyses of Varied Toll Lane Configurations , Ian A. Mckinnon, Civil Engineering
Preferred Sensor Selection for Damage Estimation in Civil Structures , Matthew Styckiewicz, Civil Engineering
An Evaluation of Drivers’ Cell Phone Use Prevalence and Safety Related Impacts , Keith E. Wenners, Civil Engineering
Theses from 2012 2012
Probabilistic Analysis of Offshore Wind Turbine Soil-Structure Interaction , Wystan Carswell, Civil Engineering
Vehicle Miles Traveled (vmt) Fee Financing Alternatives: Lessons Learned and Future Opportunities , Ashley L. Costa, Civil Engineering
Evaluating and Modeling Traveler Response to Real-Time Information in the Pioneer Valley , Tyler De Ruiter, Civil Engineering
An Optimal Adaptive Routing Algorithm for Large-scale Stochastic Time-Dependent Networks , Jing Ding, Civil Engineering
A Quantitative Analysis of the Impacts from Selected Climate Variables Upon Traffic Safety in Massachusetts , Katrina M. Hecimovic, Civil Engineering
Automated Enforcement Using Dedicated Short Range Communication , Gilbert Kim, Civil Engineering
New Technologies in Short Span Bridges: A Study of Three Innovative Systems , Andrew Lahovich, Civil Engineering
Driver Dynamics and the Longitudinal Control Model , Gabriel G. Leiner, Civil Engineering
Interfacial Strength Between Prestressed Hollow Core Slabs and Cast-in-Place Concrete Toppings , Ryan M. Mones, Civil Engineering
User Equilibrium in a Disrupted Network with Real-Time Information and Heterogeneous Risk Attitude , Ryan J. Pothering, Civil Engineering
Spatial and Temporal Correlations of Freeway Link Speeds: An Empirical Study , Piotr J. Rachtan, Civil Engineering
Evaluation of Live-Load Distribution Factors (LLDFs) of Next Beam Bridges , Abhijeet Kumar Singh, Civil Engineering
Material Characterization and Computational Simulation of Steel Foam for Use in Structural Applications , Brooks H. Smith, Civil Engineering
Varied Applications of Work Zone Safety Analysis through the Investigation of Crash Data, Design, and Field Studies , Erica Swansen, Civil Engineering
Using Micro-Simulation Modeling to Evaluate Transit Signal Priority in Small-to-Medium Sized Urban Areas; Comparative Review of Vissim and S-Paramics Burlington, Vermont Case Study , Joseph C. Tyros, Civil Engineering
Theses from 2011 2011
Evaluating Alternative Toll-Based Financing Approaches: A Case Study of the Boston Metropolitan Area , Rosaria M. Berliner, Civil Engineering
Analysis of Measurement Errors Influence on the Quantitative and Qualitative Results of Car-Following Model Calibration , Mariya A. Maslova, Civil Engineering
Development of Anchorage System for Frp Strengthening Applications Using Integrated Frp Composite Anchors , Geoffrey N. Mcguirk, Civil Engineering
An Application of Spatially Based Crash Analyses and Road Safety Investigations to Increase Older Driver Safety , Deanna A. Peabody, Civil Engineering
Safety and Operational Assessment of Gap Acceptance Through Large-Scale Field Evaluation , Steven Maxwell Tupper, Civil Engineering
Theses from 2010 2010
Historic Bridge Evaluation Using Finite Element Techniques , Helena M. Charron, Civil Engineering
A Quantitative Analysis of the Impacts from Selected Variables Upon Safety Belt Usage in Massachusetts , Samuel W. Gregorio, Civil Engineering
Analysis of Curved Integral Abutment Bridges , Emre Kalayci, Civil Engineering
Material Characterization and Structural Response of Historic Truss Bridges , Sean L. Kelton, Civil Engineering
Earthquake Engineering Simulation with Flexible Cladding System , Jun Jie Li, Civil Engineering
Route Choice Behavior in Risky Networks with Real-Time Information , Michael D. Razo, Civil Engineering
Route Choice Behavior in a Driving Simulator With Real-time Information , Hengliang Tian, Civil Engineering
Investigation of the Behavior of Open Cell Aluminum Foam , Patrick J. Veale, Civil Engineering
Theses from 2009 2009
Computer-Assisted Emergency Evacuation Planning Using TransCAD: Case Studies in Western Massachusetts , Steven P. Andrews, Civil Engineering
Value of Traveler Information for Adaptive Routing in Stochastic Time-Dependent Networks , He Huang, Civil Engineering
Analytical Modeling of Tree Vibration Generated during Cutting Process , Payman Karvanirabori, Civil Engineering
Optimal Adaptive Departure Time Choices with Real-Time Traveler Information Considering Arrival Reliability , Xuan Lu, Civil Engineering
Seismic Energy Dissipation of Steel Buildings Using Engineered Cladding Systems , Quan Viet Nguyen, Civil Engineering
Developing an Evaluation Approach to Assess Large Scale Its Infrastructure Improvements: I-91 Project , Melissa Paciulli, Civil Engineering
Enhancing Concrete Barrier Reflectivity With A Focus On Recycled Glass Aggregate Replacement , Regina Shklyan, Civil Engineering
Theses from 2008 2008
Performance Evaluation Of Existing Steel And Concrete Girder Bridges Through Non-destructive Live-load Testing , Andrew E. Jeffrey, Civil Engineering
Evaluation of Traffic Simulation Models for Work Zones in the New England Area , Pothu Raju Khanta, Civil Engineering
The Application of Traffic Calming and Related Strategies in an Urban Environment , Stacy A. Metzger, Civil Engineering
Terrazzo Cracking: Causes and Remedies , Michael J. Mitchell III, Civil Engineering
Anchorage of Carbon Fiber Reinforced Polymers to Reinforced Concrete in Shear Applications , Carl W. Niemitz, Civil Engineering
Measurement and Computational Modeling of the Mechanical Properties of Parallel Strand Lumber , Russell S. Winans, Civil Engineering
An Evaluation of Simulation Models To Assess Travel Delay In Work Zones , Fan Wu, Civil Engineering
Theses from 2007 2007
An Analysis Of The Saftey Effects Of Crosswalks With In-pavement Warning Lights , George Gadiel, Civil Engineering
The Development of a Dynamic-Interactive-Vehicle Model for Modeling Traffic Beyond the Microscopic Level , Dwayne A. Henclewood, Civil Engineering
A Comparative Evaluation of Crash Data Quality Identification Methods , Arianna M. Mickee, Civil Engineering
Advanced Search
- Notify me via email or RSS
- Collections
- Disciplines
Author Corner
- Login for Faculty Authors
- Faculty Author Gallery
- Expert Gallery
- University Libraries
- Civil and Environmental Engineering Department
- UMass Amherst
This page is sponsored by the University Libraries.
© 2009 University of Massachusetts Amherst • Site Policies
Privacy Copyright
ODU Digital Commons
Home > Engineering & Technology > Engineering Management & Systems Engineering > ETDs
Engineering Management & Systems Engineering Theses & Dissertations
Theses and dissertations published by graduate students in the Department of Engineering Management and Systems Engineering, College of Engineering, Old Dominion University since Fall 2016 are available in this collection. Backfiles of all dissertations (and some theses) have also been added.
In late Fall 2023 or Spring 2024, all theses will be digitized and available here. In the meantime, consult the Library Catalog to find older items in print.
Theses/Dissertations from 2023 2023
Dissertation: Systemic Risk Analysis of Human Factors in Phishing , Mark Guilford
Dissertation: Human Psychology Factors Influencing Agile Team Autonomy in Post-Pandemic Remote Software Organizations , Ravikiran Kalluri
Dissertation: Reinforcing Digital Trust for Cloud Manufacturing Through Data Provenance Using Ethereum Smart Contracts , Trupti Narayan Rane
Dissertation: Electric Vehicle Routing Problem – Models and Algorithms , Hesamoddin Tahami
Theses/Dissertations from 2022 2022
Dissertation: A Systems Theory-Based Framework for Environmental Scanning in Complex System Governance , Dale E. Baugh
Dissertation: Learning Curve Characterization Within Complex Low-Rate Production Environments , Robert J. Gies
Thesis: Acquisition Career Progression Model for Navy Explosive Ordnance Disposal Officers , Andrew John Heckel
Dissertation: Hard-Real-Time Computing Performance in a Cloud Environment , Alvin Cornelius Murphy
Dissertation: A Quality Systems Economic-Risk Design Theoretical Framework , Abdallah S. Thefeid
Dissertation: Predictors of Email Response: Determinants of the Intention of not Following Security Recommendations , Miguel Angel Toro-Jarrin
Dissertation: Complex System Governance Leadership , David C. Walters
Theses/Dissertations from 2021 2021
Thesis: Quantifying Cyber Risk by Integrating Attack Graph and Impact Graph , Omer F. Keskin
Dissertation: Cybersecurity Risk Assessment Using Graph Theoretical Anomaly Detection and Machine Learning , Goksel Kucukkaya
Dissertation: Application of a Blockchain Enabled Model in Disaster Aids Supply Network Resilience , Farinaz Sabz Ali Pour
Theses/Dissertations from 2020 2020
Dissertation: A Framework for Adaptive Capacity in Complex Systems , Abdulrahman Alfaqiri
Thesis: Engineering Management Competencies: A Framework for Present and Future Engineering Environments , Christopher Vaughn Barrett
Dissertation: DOD Mission Engineering and Integration Explorative-Exploitative Architecture for Technology Innovation , Jose L. Bricio-Neto
Dissertation: A Quest to Identify the Emerging Leadership Skills in VUCA World and Investigation of Their Applications in Various Organizational Levels and Security Environments , Ali Can Kucukozyigit
Dissertation: Cyber-Assets at Risk (CAR): Monetary Impact of Personally Identifiable Information Data Breaches on Companies , Omer Ilker Poyraz
Dissertation: Using Interacting Multiple Model Filters to Indicate Program Risk , Amy Sunshine Smith-Carroll
Dissertation: An Investigation on the Effectiveness of a Problem Structuring Method in a Group Decision-Making Process , Ying Thaviphoke
Dissertation: A Core Reference Hierarchical Primitive Ontology for Electronic Medical Records Semantics Interoperability , Ziniya Zahedi
Dissertation: Human Error in Commercial Fishing Vessel Accidents: An Investigation Using the Human Factors Analysis and Classification System , Peter J. Zohorsky
Theses/Dissertations from 2019 2019
Dissertation: Evaluating Stakeholder Bias in Stakeholder Analysis In Social Media , Ahmad A. Bajarwan
Dissertation: An Investigation of General Criteria for Assessing Space Flight Systems of Diverse Mission Concept Designs , Cindy L. Daniels
Dissertation: Knowledge Sharing and Creative Confidence in Promoting Employees’ Creative Behavior , Elnaz Dario
Dissertation: Optimization of Automated Guided Vehicles (AGV) Fleet Size With Incorporation of Battery Management , Ahmed Hamdy
Dissertation: An Exploratory Study of Engineering Identity Development in African American Youth , Coletta Elayne Johnson Bey
Dissertation: Identifying and Quantifying Personnel Skills Gaps , Martin Joseph McKenney
Dissertation: Measuring Risks of Interdependencies in Enterprise Systems: An Application to Ghana’s Salt Enterprise , Yaw Mensah
Dissertation: Quantifying Impact of Cyber Actions on Missions or Business Processes: A Multilayer Propagative Approach , Unal Tatar
Dissertation: Development and Initial Evaluation of a Reinforced Cue Detection Model to Assess Situation Awareness in Commercial Aircraft Cockpits , Aysen K. Taylor
Dissertation: A Comparison of Multi-Attribute Utility Theory, the Analytic Hierarchy Process, the Analytic Network Process, and New Hybrid Approaches for a Case Study Involving Radon , Jesse Ray Toepfer
Dissertation: The Resilient City: A Platform for Informed Decision-Making Process , Jarutpong Vasuthanasub
Theses/Dissertations from 2018 2018
Dissertation: A Framework for Executable Systems Modeling , Matthew Amissah
Dissertation: The Influence of Engineers on Public Policy , Sarah Bouazzaoui
Dissertation: Contextual Framework of Communications Functions Supporting Complex System Governance , Charles Wesley Chesterman Jr.
Dissertation: A Representation of Tactical and Strategic Precursors of Supply Network Resilience Using Simulation Based Experiments , Yaneth C. Correa-Martinez
Dissertation: Sequence-Based Simulation-Optimization Framework With Application to Port Operations at Multimodal Container Terminals , Mariam Aladdin Kotachi
Dissertation: Human-Intelligence and Machine-Intelligence Decision Governance Formal Ontology , Faisal Mahmud
Dissertation: Exploring Critical Success Factors of Community Development Projects , Kevin Wanjama Muchiri
Dissertation: A Multi-Level Longitudinal Investigation of Transformational Leadership Influence on Team Members Development in Engineering Project Teams , Nathapon Siangchokyoo
Dissertation: Understanding the Impact of Large-Scale Power Grid Architectures on Performance , Ange-Lionel Toba
Dissertation: Case Study on the Development of Engineering Design Modification Projects for U.S. Nuclear Power Plants: A Knowledge Retention Tool in Support of the Longevity and Resilience of the Nuclear Power Industry , Pamela M. Torres-Jiménez
Theses/Dissertations from 2017 2017
Thesis: Role of Requirements Engineering in Software Project’s Success , Sujatha Alla
Dissertation: A Hilbert Space Geometric Representation of Shared Awareness and Joint Decision Making , Mustafa Canan
Dissertation: An Investigation into Perceived Productivity and Its Influence on the Relationship Between Organizational Climate and Affective Commitment , Kaitlynn Marie Castelle
Dissertation: Emergency Diesel-Electric Generator Set Maintenance and Test Periodicity , Stephen John Fehr
Thesis: Initiating Event Analysis of a Lithium Fluoride Thorium Reactor , Nicholas Charles Geraci
Thesis: Impact of a Localized Lean Six Sigma Implementation on Overall Patient Safety and Process Efficiency , Luvianca G. Gil-Moreno
Dissertation: Diversity Team Building: Impact on Virtual Team Performance , Nina C. Magpili-Smith
Dissertation: Implementation of a Multi-Criteria Decision Analysis (MCDA) Toolkit to Aid in Ranking Naval Mission Vessel Combinations With Uncertainty , Andrew R. Miller
Dissertation: A Predictor Analysis Framework for Surface Radiation Budget Reprocessing Using Design of Experiments , Patricia Allison Quigley
Dissertation: Analysis of Project Management System Structure Using the Viable System Model (VSM) , Joseph A. Sisti
Dissertation: Planning and Team Shared Mental Models as Predictors of Team Collaborative Processes , Zikai Zhou
Dissertation: Methodology to Perform Cyber Lethality Assessment , Matthew W. Zurasky
Theses/Dissertations from 2016 2016
Dissertation: Systems Theory Based Architecture Framework for Complex System Governance , Bry Carter
Dissertation: Profit Based Simulation Model for The Rail Transportation Industry , Mark Patrick Doran
Thesis: Design and Implementation of a Virtual Team Collaboration System , Syed Ehsan
Dissertation: A General Theory of Emergence in Engineered Systems , John J. Johnson IV
Dissertation: Improvement of Work Process Performance with Task Assignments and Mental Workload Balancing , Cansu Kandemir
Dissertation: An Outcome-Based Competency Model for Systems Engineering Trainees , Vanessa J. Pietrzyk
Dissertation: A Hybrid Tabu/Scatter Search Algorithm for Simulation-Based Optimization of Multi-Objective Runway Operations Scheduling , Bulent Soykan
Thesis: Extension of the Gravity Model: A Risk Integrated Approach Towards the Impact Analysis of Mega Sports Events on Inbound Tourist Arrivals , Abdul Sami Stanekzai
Dissertation: A Retrospective Study of Amusement Ride Restraint and Containment Systems: Identifying Design Challenges for Statistically Rare Anthropometric Cases , Paula M. Stenzler
Theses/Dissertations from 2015 2015
Dissertation: An Approach for the Development of Complex Systems Archetypes , Walter Lee Akers
Dissertation: Meta-RaPS Hybridization with Machine Learning Algorithms , Fatemah Al-Duoli
Dissertation: Management and Leadership Style: Is Style Influenced by Engineering Education? , Jesse Levi Calloway
Dissertation: Key Factors Driving Personnel Downsizing in Multinational Military Organizations , Ilksen Gorkem
Dissertation: A Framework to Simplify the Choice of Alternative Analysis and Selection Methods , James Paul Lewis Holzgrefe
Dissertation: Systems Theory-Based Construct for Identifying Metasystem Pathologies for Complex System Governance , Polinpapilinho F. Katina
Dissertation: An Analysis of the Relationship Between Military Leaders' Operational Adaptability and Knowledge Transfer , Vahap Kavaker
Thesis: Improving Response Characteristics of Split Ring Resonators Using Experimental Designs , Omer Faruk Keskin
Dissertation: Examining the Relationship Between Leadership Decision Making Styles and Personality Type Within the Department of Defense , Antoine Lamont Prince Sr.
Dissertation: Command and Control in the Information Age: A Case Study of a Representative Air Power Command and Control Node , Marvin Leo Simpson Jr.
Dissertation: The Role of Diversity on Team Effectiveness in a Multinational and Multicultural Military Environment , Mustafa Utoglu
Dissertation: Safety Culture Monitoring: A Management Approach for Assessing Nuclear Safety Culture Health Performance Utilizing Multiple-Criteria Decision Analysis , James Harold Warren Jr.
Theses/Dissertations from 2014 2014
Dissertation: A Systems-Based Framework for the Assessment of Performance Measurement System Implementations in R&D Organizations , Kenneth S. Baggett Jr.
Dissertation: Human Capital Management Within the Federal Government Utilizing Generational Stratification With a Focus on Generation Y , Ian Nathaniel Barford
Dissertation: Time-Based Collision Risk Modeling for Air Traffic Management , Alan E. Bell
Dissertation: An Investigation of Business Transformation Disruptors at the Military Strategic Command Level , Thomas Bock
Dissertation: Systems Theory Based Framework for Competency Models , Joseph M. Bradley
Thesis: Emergency Diesel-Electric Generator Set Maintenance and Test Periodicity , Stephen John Fehr
Dissertation: An Instrument to Assess Individual Capacity for System Thinking , Ra'ed M. Jaradat
Thesis: Simulation Modeling and Analysis of Customs-Regulated Container Terminal Operations with Multimodal Transportation , Mariam A. Kotachi
Thesis: Assessing Organizational Effectiveness Through the Competing Values Framework A Data Envelopment Approach , Raghavender Macherla
Dissertation: Assessing the Impact of Electronic Health Record Systems Implementation on Hospital Patient Perceptions of Care , Katherine Sofia Palacio Salgar
Dissertation: Graphical Display of the Effect of Three Cash Flow Elements for Sensitivity Analysis , Kawintorn Pothanun
Dissertation: Self-Regulating Teamwork Behaviors in Low-Volume & High-Complexity Production , Aaron W. Powell
Dissertation: An Investigation into the Analysis of Truncated Standard Normal Distributions Using Heuristic Techniques , John Walter Ralls
Dissertation: A Method to Define Requirements for System of Systems , Randy Gene Walker
Dissertation: The Relationship Among HFACS Levels and Analysis of Human Factors in Unmanned and Manned Air Vehicles , Veysel Yesilbas
Theses/Dissertations from 2013 2013
Dissertation: System Governance Analysis of Complex Systems , Behnido Y. Calida
Dissertation: Shared Leadership in Six Sigma Teams From the North Shore-LIJ Health System , Brian J. Galli
Dissertation: An Expert Based Multi Attribute Group Decision Making (MAGDM) Model for Portfolio Evaluation: Application on Ground Force Units , Metin Gultekin
Dissertation: Approximate Algorithms for the Combined arrival-Departure Aircraft Sequencing and Reactive Scheduling Problems on Multiple Runways , Gulsah Hancerliogullari
Dissertation: The RQ-Tech Methodology: A New Paradigm for Conceptualizing Strategic Enterprise Architectures , Christine Ann Hoyland
Dissertation: Micro to Macro Dynamics of Shared Awareness Emergence in Situations Theory: Towards a General Theory of Shared Awareness , Samuel F. Kavacic
Dissertation: Naval Surface Warfare Center Dahlgren Division Engagement Systems (G) Department Development of a Plan to Maintain, Expand, and Create Corporate Knowledge , Luis J. Rodriguez
Dissertation: An Epistemological Inquiry into the Incorporation of Emergency Management Concept in the Homeland Security with a Post-Disaster Security Centric Focus , Mehmet Secilmis
Advanced Search
- Notify me via email or RSS
- Collections
- Disciplines
- Author Guidelines
- Engineering Management & Systems Engineering Website
- Other Digital Collections
- ODU Libraries
- Old Dominion University
Home | About | FAQ | My Account | Accessibility Statement
Privacy Copyright
- Kelvin Smith Library
- Engineering Literature Review
- Research Guides
- Literature Search
- Record your Search
- Literature Evaluation and Analysis
- Synthesize the Literature
- Getting help
Get Online Help
- KSL Ask A Librarian Information on how to get help by email, phone, & chat.
Reminder: Online Access
- Library resources require going through CWRU Single Sign-On.
- The best method is to follow links from the library website.
- When logged in and a browser window is not closed, access should continue from resource to resource.
- Remember to close your browser when done.
- CWRU Libraries Discovery & Authentication by Brian Gray Last Updated Jan 28, 2022 101 views this year
Writing the review
As you write your review, consider these ways of expressing your ideas:
- Compare and contrast views of different authors.
- Criticize previous work.
- Highlight gaps in existing research.
- Show how your work relates to previous work.
- Identify problems, conflicts, debates, gaps.
- Define a research area in a new way.
- Question previous results.
Content of a literature review
There are two primary ways to organize and structure a literature review: chronologically or thematically.
A chronological literature review presents sources in the order of their publication.
The thematic literature review groups sources based on themes, theoretical concepts, and topics that the author consider important to their research.
A literature review should include:
- an overview of the subject, issue, or theory under consideration
- group sources into categories and concepts (in support or against a particular position)
- present connections between the sources
- draw conclusions about those works that make the greatest contribution to the understanding and development of your subject
CWRU Libraries Discovery
- << Previous: Synthesize the Literature
- Next: Getting help >>
- Last Updated: Feb 6, 2024 10:30 AM
- URL: https://researchguides.case.edu/englitreview
MIT Libraries home DSpace@MIT
- DSpace@MIT Home
- MIT Libraries
Undergraduate Theses
Theses by department.
- Department of Aeronautics and Astronautics
- Department of Architecture
- Department of Biological Engineering
- Department of Biology
- Department of Brain and Cognitive Sciences
- Department of Chemical Engineering
- Department of Chemistry
- Department of Civil and Environmental Engineering
- Department of Earth, Atmospheric, and Planetary Sciences
- Department of Economics
- Department of Electrical Engineering and Computer Sciences
- Department of Humanities
- Department of Materials Science and Engineering
- Department of Mathematics
- Department of Mechanical Engineering
- Department of Nuclear Science and Engineering
- Department of Ocean Engineering
- Department of Physics
- Department of Political Science
- Department of Urban Studies and Planning
- Engineering Systems Division
- Operations Research Center
- Program in Writing and Humanistic Studies
- Science, Technology & Society
- Sloan School of Management
- System Design & Management
Recent Submissions
Applications of diesel electric power to railways
A language house cluster for Mount Holyoke College
Methods of nomographic disjunction
Dissertations & Theses in Engineering: Home
- Engineering Theses (inc. Master of Engineering projects)
Finding Theses and Dissertations
Library Catalog : Cornell theses and dissertations can be located by searching by title or author. The library retains two print copies of all Cornell University dissertations. Often it takes several months after the conferral date for the library to receive a copy.
As of March 2009, access to e-versions of those theses with electronic versions kept in eCommons@Cornell is available via the catalog. Records for the e-versions of new theses will appear in the local catalog and in WorldCat within a month of their deposit in eCommons.
Not all theses are available in electronic format. Participation in this program in voluntary and the documents submitted may not be open to public viewing.
Proquest Dissertations & Theses : Proquest Dissertations & Theses provides the full text of some theses and dissertations, with abstracts available from 1981 to the present and full text access increasing all the time. To limit your results to only Cornell University dissertations, you can search Dissertations & Theses @ Cornell University and the Weill Medical College .
Masters of Engineering Project Reports (MEng) - see for location of these project reports
Advanced Degrees Conferred –(2011 to present) a record of degrees awarded (must log in with Cornell credentials, 1 year lag in reporting)
Graduate School Data Solutions – one can ask directly about the status of a thesis
Olin Library's Guide to Finding Dissertations is much more comprehensive, consult for further information.
Theses & Dissertations from Other Institutions
- Interlibrary Loan The interlibrary loan department can help Cornell faculty, students and staff borrow or obtain copies of theses and dissertations from other institutions.
- Proquest Theses and Dissertations Proquest Dissertations & Theses provides full text of recent (from 1996 to the present) theses and dissertations, with abstracts available from 1981 to present
- Next: Engineering Theses (inc. Master of Engineering projects) >>
- Last Updated: May 4, 2022 9:32 AM
- URL: https://guides.library.cornell.edu/engdissertations
- USF Research
- USF Libraries
Digital Commons @ USF > College of Engineering > Civil and Environmental Engineering > Theses and Dissertations
Civil and Environmental Engineering Theses and Dissertations
Theses/dissertations from 2023 2023.
The Influence of Corrosion Mitigating Fluids on Post Tensioned Tendon Grout Properties and Steel to Grout Bond Strength , Sarita Ale Magar
Exploring Alternative Electron Donors for Heterotrophic Denitrification at a Water Reclamation Facility in Tampa Bay , Tejas Athavale
Mechanisms Contributing to Hydrogen-Influenced Early Failure of Bridge Tendons , David Dukeman
The Influence of Bipolar Electrochemical Cell Geometry on the Studies of Pitting Corrosion , Amin Kazem Ghamsari
Field-Base Exploratory Study of Microbial Activity in Eight Potable Water Storage Tanks in Barbados , Katelyn M. Long
Land Use/Land Cover Uncertainty Analysis Using Hydrological Modeling in the Northern Watershed of Lake Okeechobee , Andres Lora Santos
Modeling Leachate Treatment Processes in Adsorbent-amended Hybrid Constructed Wetland , Ishfaqun Nisa
Effects of Downdrag on Pile Performance , Ruthvik Pendyala
Anaerobic Digestion of Brewery Waste Including Spent Yeast and Hops , Dhanashree Rawalgaonkar
Characteristics and Hydraulic Behavior of Adsorptive Media for Use in Permeable Reactive Barriers , Shelby Rocha
Exploratory Data-Driven Models for Water Quality: A Case Study for Tampa Bay Water , Sandra Sekyere
Interdependency between Water and Road Infrastructures: Cases and Impacts , Shihab Uddin
Hurricanes and Tropical Storms’ Impact on Water Quality in Lake Okeechobee, Florida , Daniela Vasquez Diaz
Exploration of Shared Passenger Urban Air Mobility – Integrated Network Design, Operation Scheduling and System Configuration , Zhiqiang Wu
Rehabilitation Technologies to Abate Infiltration in Sanitary Sewers , Steve Youssef
Adsorption of Long and Short Per- and Polyfluoroalkyl Substances (PFAS) onto Granular Activated Carbon and Porous Organic Polymers , Yan Zhang
Adiabatic Temperature Rise and Durability Performance of Slag Blended Concrete , Hai Zhu
Theses/Dissertations from 2022 2022
Effects of Downdrag on Pile Performance , Malaak Omelia Araujo
Quantifying a 21-year Surface Water and Groundwater Interaction in a Ridge and Valley Lake Environment Using a Highly Constrained Modeling Approach , Richard T. Bowers Jr.
A Convergent Approach to Aqueous Lead (Pb) Mitigation of a Supplemental Self-Supply Shallow Groundwater Source Accessed by Handpumps in Madagascar , Adaline Marie Buerck
Identifying Significant Factors Affecting the Likelihood and Severity Level of Shared E-scooter Crashes , Recep Can Cakici
Evaluation of Aluminum Dissolution, Current Density, and Pitting Patterns During Electrocoagulation , Monica Castro Carias
Carbon Diversion, Partial Nitritation/Anammox Enrichment, and Ammonium Capture as Initial Stages for Mainstream Ion Exchange-Deammonification Process , Sheyla Chero-Osorio
Data Driven Approaches for Understanding and Improving Urban Mobility , Yujie Guo
Assessment of Scoured Bridges Subjected to Vessel Impact Using Nonlinear Dynamic Analysis , Amir S. Irhayyim
Assessment and Prevention of Bacterial Regrowth in Stored Household Water in Eastern Coastal Madagascar , Lauren Judah
The Impact of Land Use Change on Hydrology Using Hydrologic Modelling and Geographical Information System (GIS) , Nattachan Luesaksiriwattana
Simulating Flood Control in Progress Village, Florida Using Storm Water Management Model (SWMM) , Azize Minaz
Effects of Slurry Type on Drilled Shaft Strength , Cesar Quesada Garcia
Comparison Study of Consumer’s Perception toward Urban Air Mobility in the United States and Rest of the World Using Social Media Information , S M Toki Tahmid
Advanced Methods for Railroad Station Operation Decisions: Data Analytics, Optimization, Automation , Yuan Wang
High-Risk Traffic Crash Pattern Recognition and Identification Using Econometric Models and Machine Learning Models , Runan Yang
Biochar Amended Biological Systems for Enhanced Landfill Leachate and Lignocellulosic Banana Waste Treatment , Xia Yang
Passive Radiative Cooling by Spectrally Selective Nanoparticles in Thick Film Nanocomposites , David Allen Young
Theses/Dissertations from 2021 2021
A System Architecture for Water Distribution Networks , Noha Abdel-Mottaleb
Sustainability Assessment of a Pressure Retarded Osmosis System , Samar Al Mashrafi
Health Risk Assessment of Local Populations Ingesting Water with Naturally Occurring Arsenic and Fecal Related Contaminants in Lake Atitlan, Guatemala , Marisol Alvarez
Influence of Coating Defects Within the Lock Seams on the Corrosion Performance of Aluminized Steel Drainage Pipes , Mohammed Al Yaarubi
Longitudinal Trajectory Tracking Analysis for Autonomous Electric Vehicles Based on PID Control , Hossein Amiri
An Assessment and Exploration of Recent Methodological Advances in Safety Data Analysis , Suryaprasanna Kumar Balusu
Pressure Retarded Osmosis: A Potential Technology for Seawater Desalination Energy Recovery and Concentrate Management , Joshua Benjamin
Assessing the Feasibility of Microbially Managed Biological Filtration in U.S. Drinking Water Systems for Removal of Contaminants of Emerging Concern , Andrew J. Black
The Effect of Cement and Blast Furnace Slag Characteristics on Expansion of Heat-Cured Mortar Specimens , Jair G. Burgos
A Systems Approach for Improving the Performance of Rural Community-Managed Water Systems Using SIASAR: Case Studies in Bolivia and Colombia , Rachel A. Cannon
Passive Nitrifying Biofilters for Onsite Treatment of Saline Domestic Wastewater , Daniel Arnulfo Delgado
Plastic Pollution in Urban Rivers: Spatial and Temporal Patterns of Plastic Release and Transport , Charlotte Juliane Haberstroh
Effects of Nitrate on Arsenic Mobilization during Aquifer Storage and Recovery , Hania Hawasli
Prediction of the Effects of Turbulence on Vehicle Hydroplaning using a Numerical Model , Thathsarani Dilini Herath Herath Mudiyanselage
Shortcut Nitrogen Removal in Photo-sequencing Batch Reactor, Experiments, Dynamic Model and Full-scale Design , Sahand Iman Shayan
Chorine Conversion: Biological and Water Quality Impact on Activated Carbon Block Point of Use Filters , Horace S. Jakpa
Efficient Management of Nitrogen and Phosphorus at Centralized Water Reclamation Facilities , Helene Kassouf
Building and Characterizing a Lab-Scaled Aquifer Storage and Recovery System , Murat Can Kayabas
Corrosion Rate Prediction in FRP-Concrete Repair , Mohammad A. Khawaja
Use of Biochar and Zeolite for Landfill Leachate Treatment: Experimental Studies and Reuse Potential Assessment , Thanh Thieu Lam
Feasibility of Epoxy Bond Enhancement on High-Strength Concrete , Amanda A. Lewis
Leaf Cutter Ant Nest Soil Cement Stabilized Earthen Bricks: Materials and Methods for Engineering Field Applications , Faith Malay
Minimum Cut-Sets for the Identification of Critical Water Distribution Network Segments , Xiliang Mao
An Assessment of Nutrient Improvement in Surface Water Due to the Conversion of Onsite Sewage Treatment and Disposal Systems to Sewerage , Jenelle A. Mohammed
Development of a Numerical Process Model for Adsorbent-amended Constructed Wetlands , Lillian Mulligan
Corrosion Propagation of Stainless Steel Reinforced Concrete , Nelly Sofía Orozco Martínez
Corrosion Durability Service Life of Calcium Silicate-Based Reinforced Concrete , Carolina Páez Jiménez
Assessment of the Environmental Sustainability of a Small Water Production Facility in Madagascar , Jesal Patel
Computational Fluid Dynamics (CFD) Analysis of the Hydraulic Performance and Bio-kinetics in a Full-Scale Oxidation Ditch , Kiesha C. Pierre
Biochar Amended Bioretention Systems for Nutrient and Fecal Indicator Bacteria Removal from Urban and Agricultural Runoffs , Md Yeasir Arif Rahman
Understanding the Leaching Mechanism for Lead (Pb) Found in Components of Locally Manufactured Handpumps in Eastern Madagascar , Nidhi Shah
Impacts of Automated Vehicle Technologies on Future Traffic , Xiaowei Shi
Community Assessment of Water Perceptions and Household Point-of-Use Treatment Methods in Madagascar , Isabella Rose Silverman
Laboratory Examination of Lead Weights Harvested from Pitcher Pumps in Eastern Madagascar , Madelyn Wilson
Impact of grain morphology on the temporal evolution of interfacial area during multi-phase flow in porous media , Fizza Zahid
EAV Fleet Management in Transportation and Power Systems , Dongfang Zhao
Theses/Dissertations from 2020 2020
A Framework for Assessing the Reliability, Availability, Maintainability, and Safety (RAMS) of Decentralized Sanitation , Adefunké Adeosun
Development of an Organic Processor Assembly (OPA) for Sustainable Resource Recovery to Enable Long-Duration, Deep-Space Human Exploration (LoDDSHE) , Talon James Bullard
Black Lives Matter in Engineering, Too! An Environmental Justice Approach towards Equitable Decision-Making for Stormwater Management in African American Communities , Maya Elizabeth Carrasquillo
Coral Reef Restoration in the Tropical West Atlantic Amid the COVID-19 Pandemic , Linden Cheek
Designing Next-generation Transportation Systems with Emerging Vehicle Technologies , Zhiwei Chen
Strength Restoration of Corrosion Damaged Piles Repaired with Carbon Fiber Reinforced Polymer Systems , Jethro Clarke
Water Quality and Sustainability Assessment of Rural Water Systems in the Comarca Ngäbe-Buglé, Panama , Corbyn Cools
Rapid Cross-Section Imaging with Magnetic and Impedance Sensors for Grout Anomaly Detection in External Post-Tensioned Tendons , Hani Freij
Enhanced Nitrogen, Organic Matter and Color Removal from Landfill Leachate by Biological Treatment Processes with Biochar and Zeolite , Bisheng Gao
Bond Life of Structural Epoxy-Concrete Systems Under Accelerated Hygrothermal Aging , Philip W. Hopkins
Socio-Technical Transitions in the Water Sector: Emerging Boundaries for Utility Resilience in Barbados , Wainella N. Isaacs
Structural and Agricultural Value at Risk in Florida from Flooding during Hurricane Irma , Alexander J. Miller
An Inferential Study of the Potential Consumer Value of Free Charging for Users of Public Electric Vehicle Charging Infrastructure , Divyamitra Mishra
Reimagining Bottom-up Participatory Climate Change Adaptation in the Philippines , Emily Clark Nabong
Effects of Physical and Chemical Characteristics of Slags and Cements on Durability of Portland Cement-Slag Blended Systems , Farzaneh Nosouhian
Using a Systems Thinking Approach and Health Risk Assessment to Analyze the Food-Energy-Water System Nexus of Seaweed Farming in Belize , Estenia J. Ortiz Carabantes
Implementation of Large-Scale Anaerobic Digestion of Food Waste at the University of South Florida , Karamjit Panesar
Enhanced Fluoride Removal in Biosand Filters Using Aluminum Oxide Coated Media and Modified Filter Design , Madison Leigh Rice
Use of Sugarcane Bagasse Ash as Partial Cement Replacement in Interlocking Stabilized Soil Blocks (ISSBs) , Adah Shair
Bio-electrochemical Denitrification Systems and Applications for Nitrogen Removal in On-Site Wastewater Treatment , Kamal Ziad Taha
Development of an Integrated Direct Membrane Filtration (DMF) and Anaerobic Membrane Bioreactor (AnMBR) System for Dilute Municipal Wastewater Treatment , Ahmet Erkan Uman
Post-overlay Flexible Pavement Performance Modeling and Its Application in Sustainable Asphalt Overlay Policy Making , Chunfu Xin
Sustainable Nutrient Management Through Technology-Level Evaluation and System-Level Optimization , Xiaofan Xu
Influence of Glass Fiber Reinforced Polymer Wraps on Corrosion Progression of Bridge Piles in Marine Environments , Shayan Yazdani
Theses/Dissertations from 2019 2019
Seepage-Coupled Finite Element Analysis of Stress Driven Rock Slope Failures for BothNatural and Induced Failures , Thomas Becket Anyintuo
Statistical Analysis of the Role of Socio-Demographic and Health Factors in Shared Mobility Related Behaviors and Usage Likelihoods , Natalia M. Barbour
Model of a Sulfur-based Cyclic Denitrification Filter for Marine Recirculating Aquaculture Systems , Zhang Cheng
Exploring the Equity Performance of Bike-Sharing Systems with Disaggregated Data: A Story of Southern Tampa , Zhiwei Chen
Prioritizing Rehabilitation of Sanitary Sewers in Pinellas County, FL , Jesse T. Hillman
Highway Lane Management Policy for Existing and Connected Autonomous Vehicles , Md Mokaddesul Hoque
Advanced Search
- Email Notifications and RSS
- All Collections
- USF Faculty Publications
- Open Access Journals
- Conferences and Events
- Theses and Dissertations
- Textbooks Collection
Useful Links
- Rights Information
- SelectedWorks
- Submit Research
Home | About | Help | My Account | Accessibility Statement | Language and Diversity Statements
Privacy Copyright
Undergraduate thesis
Undergraduate Thesis
UNSW Engineering students are required to complete an undergraduate thesis project during the 4th year of their study. Students can choose from a variety of projects, with research and industry thesis options available. The standard thesis is 4 UoC (Unit of Credit) per term starting T1, T2 or T3.
You’ll enrol Thesis A, Thesis B and Thesis C and complete the thesis across three consecutive terms. Once Thesis A is taken, Thesis B and Thesis C must be taken consecutively in the two terms that follow.
Your school may also offer the option to complete a practice thesis. You’ll enrol in Thesis A and Thesis B, each worth 6 UoC over two consecutive terms.
For further information or questions, please contact your Undergraduate Thesis Coordinator .
All undergraduate students enrolled in the dual degree with Biomedical Engineering (regardless of undergraduate major), must enrol in 12 UoC of thesis courses with the Graduate School of Biomedical Engineering.
Students will complete their thesis over three terms (4+4+4) or over two terms (4+8). A summary of the assessment is as follows:
BIOM4951 Thesis A : It is intended that Thesis A cover the scoping, planning, and completing preparations for the project.
BIOM4952 Thesis B : The primary intention behind Thesis B is to ensure students stay on track with their projects and project work as they progress through the year.
BIOM4953 Thesis C : Thesis C continues the project work. The key deliverable is the Written Report, alongside a poster presentation.
Before commencing Thesis A
You must nominate 3 different supervisors to work with.
Please follow the below instructions in order to view the projects available and to find a supervisor.
The instructions to view the projects are as follows:
You must complete this process and have a project allocated BEFORE starting BIOM4951. If you are planning on doing a project with industry, this requires an industry supervisor and a supervisor from GSBmE. Please contact me [email protected] .
- Go the Moodle course Selection of Biomedical Thesis Project
- Self-enrol as a student using the key Student50
- The projects are listed under Thesis Database
- Contact the supervisor directly if you have any questions
- When ready, follow the instructions on the Moodle page for nominating your three supervisors. Project selection opens midway through the previous term (e.g. for Thesis commencing in T2, selection opens in Week 6 of T1). Selection closes on the last day of exams of previous term.
Undergraduate students are required to complete at least 12 UOC of thesis courses. The table below shows the default Thesis course sequence for your stream and any additional options you may have. The following sections provide more information about each of these sequences.
Research thesis (CEIC4951/2/3)
Research thesis consists of three courses worth 4 units of credit each – CEIC4951 Research thesis A, CEIC4952 Research Thesis B & CEIC4953 Research Thesis C. Undergraduate students may commence Research Thesis once they have completed at least 126 UOC from a School of Chemical Engineering discipline stream and their 3rd year core.
You must identify a supervisor and project prior to commencing CEIC4951. To find out more about Research Thesis courses, the projects available and how to find a supervisor, please join the Research Thesis Projects page on Moodle (enrolment key co3shyh).
- These courses are normally taken over three consecutive terms. However, students that make excellent progress in Thesis A, may be allowed to take Thesis B and Thesis C in the same term.
- High performing students may be permitted to take CEIC9005 (or CEIC4005) in lieu of their regular Research Thesis courses. Contact the course coordinator for more information.
Product Design Project Thesis (CEIC4007/8)
Product Design Project Thesis consists of two courses both worth 6 UOC – CEIC4007 Product Design Project Thesis A and CEIC4008 Product Design Project Thesis B. Undergraduate students may commence Research Thesis once they have completed at least 126 UOC from a School of Chemical Engineering discipline stream. CEIC6711 Complex Fluids Microstructure and Rheology is a co-requisite course.
You do not need to secure a supervisor before commencing Product Design Project Thesis A.
Research Thesis Extension (CEIC4954)
Research Thesis Extension ( CEIC4954 ) aims to provide you with an opportunity to go extend your thesis project by exploring your research problem in more breath &/or depth. The work you do in this course builds on the work completed in CEIC4951, CEIC4952 and CEIC4953. This course is especially relevant for undergraduate students considering a research career in fields related to chemical engineering and food science. The activities in this course are designed to introduce you to the ways in which research is practiced and communicated in a higher degree environment.
CEIC4954 is considered a practice elective in the Chemical Engineering stream (CEICAH) and a discipline elective in all other streams.
Students enrolled in an undergraduate degree within the School of Civil and Environmental Engineering need to complete a thesis as part of their program. Students have the option of taking one of the following course combinations to complete their thesis requirement:
CVEN4951 / 4952 / 4953 (Research Thesis A/B/C)
Students must complete the Thesis Application Form to be registered for the course. This combination of courses are worth 12UOC in total, and will take 3 terms to complete (or 2 with prior approval from the supervisor). A minimum WAM of 70 is required for entry.
CVEN4961 / 4962 / 4963 (Higher Honours Thesis A/B/C)
Students must complete the Thesis Application Form to be registered for the course. This combination of courses are worth worth 24UOC in total and requires students to have a minimum WAM of 80.
Note: If you choose to undertake the Research Thesis option (CVEN4951/4952/4953 or CVEN4961/4962/4963) you must also complete CVEN4701 prior to finishing your studies.
CVEN4050 / 4051 (Thesis A/B)
Students are able to enrol themselves into this course directly via myUNSW, it has no minimum WAM requirement, and does not require students to find a supervisor.
If you would like to register for Research Thesis subjects in Summer, you must first obtain approval from your supervisor prior to Summer enrolment. Please check the course notes for more information.
Thesis Submissions
As of Summer 2024, students will need to submit their Thesis submissions via Moodle instead of the School’s intranet.
For the list of topics and available supervisors, you can visit: Find a Supervisor or Project
UNSW Bachelor of Computer Science (Honours) and Bachelor of Engineering (Honours) students can find a guide to getting started with Thesis A on the CSE Thesis Topics Moodle site . Use cse-44747437 to enter the site as a student.
On this site, you will find the Thesis Topic Database. You can look through the topics or visit the academic supervisors' profile pages to find a topic you would like to work on. Once you have chosen your topic(s), you will then need to contact the relevant Supervisor for confirmation.
On this site, you can also find the course outlines of Thesis A, Thesis B and Thesis C, and the detailed instructions about finding a supervisor.
Final year students in Mechanical Engineering and Postgraduate coursework students are required to undertake a three-term, year long project. These projects are usually open-ended research or design projects, where the student works with an academic supervisor to find an answer to an engineering question. Students are required to manage and plan their projects over the three terms. The Thesis course can be started in any term and is generally completed in the final three terms of the degree.
If taking a Research Thesis (individual project), enrol in Research Thesis A (MMAN4951) , Research Thesis B (MMAN4952) and Research Thesis C (MMAN4953) .
For Research thesis, you will first need to find a supervisor and get their approval. An approved application is required to undertake Research and to gain permission to enrol. The deadline to enrol in MMAN4951/MMAN9451 is Friday Week 1, but get in early to get the project and supervisor you want.
For information on available projects and the enrolment process, please see our Sharepoint site , or contact Professor Tracie Barber .
If you’re an Electrical Engineering student and planning to take Thesis course, you will need to find a supervisor and get their approval prior to enrolling to the course. The deadline to find a supervisor and enrol into the course is Friday week 1. Please follow the procedure below to look for potential supervisors, their topics and enrol into the course
- Go to: https://moodle.telt.unsw.edu.au/course/view.php?id=20890
- Enrol yourself as student using the enrolment key: EETTPstudent
- Login to Moodle course: 'EET School Thesis/Project'
- View research profiles of prospective supervisors and topics in 'Research Topics' section.
- Contact potential supervisor to discuss the possibility of working with them.. You must get their written permission to sign up on a topic before you can proceed to next step.
- a. Go to ‘Select Supervisor’, find the supervisor and click action box to become a member
- b. Go to ‘Register Topic,’ ‘Add Entry’ and enter your details and topic title.
- Enrol into Thesis course on myUNSW.
Research Thesis
Research Thesis is a compulsory pathway in the Mining Engineering (Hons) degree, Engineering (Hons) – Petroleum Engineering [Main Stream], and an optional pathway for high WAM students doing Petroleum Engineering. This thesis allows a student to work closely with a particular supervisor, learn particular skills – like programming or laboratory work, conduct research and write up their findings. To take this stream, you will need to first enrol in MERE4951 Research Thesis A.
MERE4951 Research Thesis A
In this course you will be required to find a supervisor and topic to work on. You can find a list of our research strengths here:
https://www.unsw.edu.au/engineering//our-schools/minerals-and-energy-resources-engineering/our-research
You can also find an individual academic and ask them about topics that they work on. Academics from our school are available here:
https://www.unsw.edu.au/engineering/ourschools/minerals-and-energy-resources-engineering/about-us/our-people
Once you enrol, make sure you have access to the Microsoft Team (the link is on the Moodle page), which is filled with information and has active forums for asking questions:
MERE4952 & MERE9453 Research Thesis B & C
These two units (4UoC each) can be taken in the same term or separately. Thesis B involves submitting a video/audio reflection of the work so far and an interim report. Thesis C involves writing your thesis and recording and submitting a scientific presentation of your results./engineering/our-schools/minerals-and-energy-resources-engineering/our-researchengineering/our-schools/minerals-and-energy-resources-engineering/our-research
All undergrad thesis sudents can find a list of thesis topics will posted on the Thesis A Moodle site . The student key to access the site will be sent out by the thesis co-ordinator to all students who will be taking thesis the following term. You should review the list and discuss the topics with the relevant supervisor to get an idea of what it entails.
Once both the supervisor and student have agreed on the topic, a Thesis Nomination Form should be completed. This is submitted to the Thesis Coordinator and uploaded to the SOLA 4951 Moodle site prior to the student commencing work on their topic. All students must have chosen a supervisor by 9am Monday week 1 of term.
You can develop your own thesis topic, if you can find a supervisor from within the School. This will require you to attach a one page description of the thesis topic and signed by the supervisor to the Thesis Nomination Form.
The School also encourages students who wish to do an industry-led thesis topic. In this case the mentor from industry would be the student’s co-supervisor, however an academic staff member from the School must act as the supervisor of the thesis.
For an industry-led thesis, you must obtain approval from an academic of the School to supervise the topic. You should submit a signed letter from the industry representative and academic supervisor with a brief outline of the project with a Thesis Nomination Form.
All information needed for the deliverables of thesis A can be found in the course outline which is available on the SOLA4951 Moodle site.
Undergraduate Thesis FAQs
The Engineering thesis will be taken for the duration of three terms - as Thesis A, Thesis B and Thesis C.
Each course will carry 4 Units of Credit (UoC) for a total of 12 UoC. The total UoC requirement remains unchanged from current.
Students will have two options to take Thesis from 2019:
- Option 1 - Standard: (4 UoC per term starting T1, T2 or T3) : Students enrol in Thesis A, Thesis B and thesis C and complete the Thesis across three consecutive terms. Total of 12 UoC. Note than once Thesis A is taken, Thesis B and Thesis C must be taken consecutively in the two terms that follow.
- Option 2: (4+8: 4 UoC in one term and 8 UoC in the following term) : Students who demonstrate satisfactory progress in Thesis A may apply to their School to take a 4+8 UoC structure where both Thesis B and C are taken in the next single term of that year. Total of 12 UoC. This option is subject to having demonstrated satisfactory progress in Thesis A.
Students who do not maintain satisfactory performance in Option 2 will revert to Option 1 and take Thesis across three terms.
Thesis A, Thesis B and Thesis C will run in every term (T1, T2 and T3).
Yes, it’s possible to start your thesis in any term, however once Thesis A is taken, Thesis B and Thesis C must be completed in each term consecutively afterward.
Depending on the thesis course you take, your topic may be provided to you or you will need to develop one.
If you need to develop one, most schools have a website that lists available topics and the staff willing to supervise those topics. You may wish to select a topic based on areas of engineering interest, extracurricular interests (such as the ChallENG Projects ), or preference for working with a particular academic in your field. You can even come up with your own in consultation with your thesis supervisor. Take a look!
The process is different for each school, so review the information above.
If you still have questions, contact your school’s postgraduate thesis coordinator .
Doing thesis in industry is a great opportunity and worth pursuing. Some students are able to arrange a thesis project that follows on from an industrial training placement.
Students wanting to take an industry-based project still need to take the Research Thesis courses for their specialisation. You need to arrange a UNSW academic as a co-supervisor and apply for permission to take thesis offsite.
Please check with your school’s Undergraduate Thesis Coordinator for further details.
Yes, there are a number of Humanitarian Engineering Thesis Supervisors within UNSW Engineering who can potentially supervise a thesis.
Students who demonstrate satisfactory progress in Thesis A may apply to their School to take a 4+8 UoC structure where both Thesis B and C are taken in the next single term of that year.
The 4+8 UoC option is intended for high performing students to finish their thesis project in two terms. Students enrolled in this structure will take Thesis A in the first term and then, provided that satisfactory progress has been reached, will take Thesis B and C in the term following Thesis A.
Yes. In addition to the Thesis, you can enrol in up to two additional courses per term. You should enrol in these courses when annual enrolment opens. Overloading is possible but will require program authority approval.
If progress is deemed as unsatisfactory at the end of Thesis A, the student will move to the default Thesis option: Thesis A, B and C (4 UoC).
Yes, you’ll still be able to enrol in up to two additional courses. Given the increased workload of having to do Thesis B and C together, two courses per term would be the maximum recommended by the Faculty.
An enrolment continued (EC) grade will appear against your Thesis A/Thesis B subjects until you’ve completed your thesis. At this time your final grade will appear against your Thesis C. Around a week after you have received your final mark, a roll back process will be run so that the EC grades previously against Thesis A and Thesis B will be updated to reflect your overall Thesis mark.
Information on honours calculations are available on the Bachelor of Engineering (Honours) program rules page.
It’s possible to take leave and then continue your thesis on your return. Talk to your supervisor about your situation and the dates involved so that you can work out a suitable plan together.
Most schools have a Moodle, intranet, or web page with detailed information about their thesis program. That should be your next port of call – check your school’s section above for access instructions.
Schools often run information sessions during the year. These will be advertised via email, on social media and/or during class. Keep an eye out for these events.
If you have questions related to enrolment or progression, contact the Nucleus .
Finally, each school has an Undergraduate Thesis Coordinator who can answer specific questions related to your personal circumstances.
« All Events
Graduate Student Event – Effective Use of AI for Thesis and Dissertation Prep
April 5 @ 3:00 pm - 5:00 pm, event navigation.
- « Neural Networks and Intelligent Systems
- MARESUNEX Seminar »
WHAT TO EXPECT
Join us for the “Effective Uses of AI for Thesis and Dissertation Preparation” at the Graduate Student Open House. In this workshop you will learn to use generative artificial intelligence to enhance your thesis or dissertation. We will also discuss the benefits and challenges of integrating AI into academic research. This is a prime opportunity for networking and sharing ideas with fellow researchers. Don’t miss out—advance your academic work with innovative AI strategies.
- Google Calendar
- Outlook 365
- Outlook Live
Related Events
MARESUNEX Seminar
Neural Networks and Intelligent Systems
College of engineering.
- Graduate Programs
- Undergraduate Programs
- Schedule a tour
- Strategic Research Areas
- Research Groups, Centers and Labs
- Undergraduate Research Opportunities
- Executive Leadership
- Administrative Staff
- Faculty Awards and Honors
- Resources and Groups for ECE Women
- ECE Advisory Council
- ECE Connections
- Giving Opportunities
- Ways to Give
- Academic Support
- Financial Support
- Mental Health Resources
- Experience and Employment
- Undergraduate Services
- Graduate Services and Activities
Cong Chen and Zeki Hayran receive 2024 ECE Outstanding Ph.D. Thesis Research Award
Cong Chen and Zeki Hayran are the winners of this year's ECE Outstanding Ph.D. Thesis Research Award. The annual award is given to graduating Ph.D. students from the School of Electrical and Computer Engineering (ECE) based on the significance of their doctoral research.
Chen’s research aims to drive the global energy transition toward a carbon-neutral future, which relies on the large-scale integration of renewables and electrification across transportation, civil infrastructure, and industrial manufacturing sectors. Her thesis addresses two challenges of energy transition: (i) the aggregation of small but vast distributed energy resources (e.g., rooftop solar and electric vehicles) to balance global energy demand and supply under the recent landmark ruling of the Federal Energy Regulatory Agency; (ii) the integration of battery resources for reliability, resilience, and economic efficiency of future power grids with high penetration of stochastic renewable energy.
“It’s my great honor to receive the ECE Outstanding Ph.D. Thesis Award, a profound encouragement for me to continue my exciting and challenging research journey. I would like to express my sincere gratitude to my supportive and inspiring advisor Lang Tong , my coauthors, my labmates from Digital Energy and Power Systems Group , my family, and my friends,” said Chen.
Hayran’s research focuses on metamaterials—materials engineered to possess specific optical properties—that vary over time. Historically, metamaterials had properties that varied only in space. Hayran’s work has demonstrated that by incorporating time as an additional degree of freedom, not only do many interesting physical phenomena emerge, but we can also surpass conventional performance limits for many applications. This opens the door to advancing next-generation photonic and electromagnetic systems with low-energy consumption and superior performance and capabilities.
“I would like to thank my advisor Dr. Francesco Monticone for his invaluable mentoring and guidance throughout my Ph.D. journey. Being recognized with this award is a true honor. It symbolizes not only the culmination of years of dedication and hard work but also the support and guidance I have received from mentors, peers, and collaborators. This accolade marks a significant milestone in my academic career and fuels my commitment to continue pursuing innovative research, aiming to contribute further to our collective understanding and advancement in the field,” said Hayran.
The ECE Graduate Committee reviews award nominations and the director of graduate studies oversees the process. In addition to a cash prize, the winner(s) will be presented with an engraved plaque near the end of the semester.
Other Articles of Interest
Center for technology licensing program continues to fund early-stage cornell lab innovations.
Eight projects have been selected from the Fall 2023 application cycle to receive Ignite Innovation Acceleration grants. The grants are designed to help project teams pursue licensing, form startups... Read more about Center for Technology Licensing program continues to fund early-stage Cornell lab innovations
High bandwidth means smart signal timing; spiral waveguides are here to help
Using 3-D stacks of reflectors on microchips could triple data rates of wireless links to help speed development of 6G communications, a new study finds. Most current wireless communications... Read more about High bandwidth means smart signal timing; spiral waveguides are here to help
Creating a remote sensor to detect health troubles
The device could be particularly helpful for patients with geriatric heart failure and other serious conditions. Read more about Creating a remote sensor to detect health troubles
Final Defense: Rahul Franklin - Materials Engineering - Purdue University
Final Defense: Rahul Franklin
"Four-Dimensional Characterization of the Construction and Mechanical Behavior of the Apis mellifera Honeycomb"
Rahul Franklin , MSE PhD Candidate
Advisor : Professor Nikhilesh Chawla
2024-04-11 10:00:00 2024-04-11 11:00:00 America/Indiana/Indianapolis Final Defense: Rahul Franklin PGSC Room 105A & WebEx
- Washington State University
- How to Find Us
- 100+ Years of BSE History
- News & Accomplishments
- Administrative Staff
- Research Associates & Technical Staff
- Graduate Students
- Agricultural Automation Engineering
- Bioenergy & Bioproducts Engineering
- Food Engineering
- Land, Air, Water Resources & Environmental Engineering
- Food Engineering - RA opportunities
- Food Packaging - RA opportunities
- How to Apply
- PhD Guidelines
- MS Guidelines
- Student Resources
- Funding Opportunities
- Student Clubs & Chapters
- CAHNRS Finance and Administration
- Request to Hire
- Conference Rooms
- Main Printer/Copier Access
- Safety Committee
- Safety Training and Orientation
- New Employee Safety Checklist
- Incident Reporting
- CAHNRS Safety Resources
- Environmental Health & Safety
Three Minute Thesis – Ranjan Sapkota (PhD) and Hasan Rahat(MS) win the BSE Competition
On behalf of Dr. Manuel Garcia-Perez, I would like to thank Supriya, Angana, Priyanka, Dawood, Martin, Shafik, Milton, Achyut, Ranjan and Hasan, for participating in the BSE’s 3MT Thesis Competition! All great presentations and final decisions were not easy to make.
Also, big thanks to our faculty judges and the audience!
The winners in PhD category, moving on to the CAHNRS competition, are Ranjan, Milton and Supriya. Hasan is moving on to the CAHNRS competition in MS category. The CAHNRS Competition will take place on March 18, 2024.
Congratulations to All!!!
Office of Neuroscience Research
Thesis Defense: Shashank Anand (Biomedical Engineering Program) – “An exploration into network analyses of motor behavior, brain-computer interface control, arousal states, and ischemic lesion models”
“An exploration into network analyses of motor behavior, brain-computer interface control, arousal states, and ischemic lesion models”
Thesis lab: Dan Moran (WashU Biomedical Engineering)
For inquiries contact Christy Durbin .
Community News for the week of March 25, 2024
Week of march 25, 2024.
The following announcements are as of March 22.
Events and Seminars
April 1: Student Seminar, 3:00 p.m., 66-110 – Michael Li, “Guided Learning of Electrochemical Impedence Spectra Circuit Topologies” – Yash Samantaray, “Electrochemically-resolved Acoustic Emissions for Li-ion Batteries”
April 2: Ten Talks: An Undergraduate Seminar Series, Milena Pagán, SB ’11, 12:00 p.m., 66-360. [ RSVP ]
April 3-5: ChemE Student Appreciation Week’s Plant Giveaway. [ Details ]
April 4: MITsdm Healthcare Systems Day. [ Details ]
April 4: C.C. Mei Distinguished Speaker Series, “ The Plant Age: Materials for the Future “, Prof. Oded Shoseyov.
April 5: ChemE Seminar Series: 3:00 p.m. in 66-110 “ Talking to Cells: Biomolecular Engineering for Deep Tissue Imaging and Control of Cellular Function “, Mikhail G. Shapiro, California Institute of Technology
April 11: Ivy+ Just in Time Virtual Career Fair. 1:00 p.m. – 4:00 p.m. [ Register ]
April 11: Starr Forum on China: The rise and fall of the EAST. 5:00 p.m. in 66-110. [ Register ]
April/May: Spring MITEC Student Seminar Series. 12:00 p.m. in 66-168. [ Signup ]
June 23-28: The Twenty-Fourth International Conference on the Science and Applications of Nanotubes and Low-Dimensional Materials. [ Details ]
See ChemE calendar for more listing of department events and seminars >>
Thesis Defense
Internships, fellowships, and job opportunities.
MIT Introduction to Technology, Engineering, & Science : Paid instructor & TA positions. [ Details ]
MIT Graduate Community Fellow : [ See current positions and apply ]
MIT Office of Sustainability (MITOS) : open position for student sustainability researchers. [ Details ]
Search for more faculty positions around the world at PolytechnicPositions.com See listing of upcoming career-related events, workshops, and company info sessions>>
Other Announcements
March 31: Application due for Experiential Ethics Summer Course. [ Details ]
April 12: Fall Career Fair Planning, Student & Postdoc Focus Group Opportunity on 4/24. [ RSVP ]
MIT Solve: Apply to help select 2024 Solver Teams. [ Details ]
MIT Energy and Climate Club: Present your energy research at a MITEC seminar. [ Signup ]
PKG Center: Funded Summer Opportunities. [ Details ]
Chancellor’s Innovation Fund: Info sessions and application [ Details ]
MIT Spouses & Partners Connect : Language Conversation Exchange events. [ See Calendar ]
Spring 2024 MIT Energy & Climate Club Launchpad. [ Undergraduate Application ]
D-Lab Energy: Introduction to Energy in Global Development. [ Register now! ]
Food@MIT Guide: How to access healthy & affordable food at MIT. [ Details ]
Student Support Services (S3): Help in an accessible & respectful environment. [ virtual & walk-in locations ]
MIT Alumni Advisors Hub: Signup to connect with MIT alumni for career conversations. [ Details ]
Become an iREFS to offer confidential, peer-to-peer conflict management coaching and support to graduate students at MIT! Email [email protected]
REFS (Resources for Easing Friction and Stress): Feeling stressed? We are here to help. Email: [email protected] | Website: web.mit.edu/refs-x/
IMAGES
VIDEO
COMMENTS
For engineering, thesis readers are chosen by the student. It is the responsibility of the student to select their thesis readers and to ensure that the readers are committed. No readers are ever assigned. For Engineering only (non-joint) the thesis committee typically consists of the advisor and two more faculty
Theses from 2021 PDF. Design and Testing of a Foundation Raised Oscillating Surge Wave Energy Converter, Jacob R. Davis, Mechanical Engineering. PDF. Wind Turbine Power Production Estimation for Better Financial Agreements, Shanon Fan, Mechanical Engineering. PDF
The examining committee for MS candidates completing theses should be composed of three (3) members. Thesis advisor (committee chair) One technical expert outside of the ME department. A third member of the committee, often another faculty member in the ME department. The committee chair is normally a full-time, tenure-track faculty member.
MIT's DSpace contains more than 58,000 theses completed at MIT dating as far back as the mid 1800's. Theses in this collection have been scanned by the MIT Libraries or submitted in electronic format by thesis authors. Since 2004 all new Masters and Ph.D. theses are scanned and added to this collection after degrees are awarded.
Waterproofing Shape-Changing Mechanisms Using Origami Engineering; Also a Mechanical Property Evaluation Approach for Rapid Prototyping, Andrew Jason Katz. PDF. Hydrogen Effects on X80 Steel Mechanical Properties Measured by Tensile and Impact Testing, Xuan Li. PDF. Application and Analysis of Asymmetrical Hot and Cold Stimuli, Ahmad Manasrah. PDF
In engineering and science, a thesis or dissertation is the culmination of a master's or Ph.D. degree. A thesis or dissertation presents the research that the student performed for that degree. From the student's perspective, the primary purpose of a thesis or dissertation is to persuade the student's committee that he or she has performed and ...
Investigating the role of mechanical and structural properties of scaffolds for cartilage tissue engineering . Sturtivant, Alexander (The University of Edinburgh, 2024-03-04) Osteoarthritis is currently measured as the leading cause of disability. It is responsible for significant, social, economic and health costs.
Master's Thesis guide January 2019 Preparing a thesis requires that students have acquired thorough knowledge of the subject and possess the ability to find relevant information effectively and to work independently. This guide contains general instructions for writing a Master of Science (technology) thesis at Tampere Uni-versity.
The purpose of this document is to state the formal requirements which must be met by NYU Tandon School of Engineering students who are required to submit a Master's Thesis to qualify for the M.S. degree, as described in the. NYU Tandon School of Engineering bulletin for a particular academic program. thesis is basically composed of two parts ...
Digital Commons @ USF > College of Engineering > Computer Science and Engineering > Theses and Dissertations. Computer Science and Engineering Theses and Dissertations . Follow. Jump to: Theses/Dissertations from 2023 PDF. Refining the Machine Learning Pipeline for US-based Public Transit Systems, Jennifer Adorno. PDF.
Cullen College of Engineering: Thesis & Dissertation Submission and Binding Requirements BS Honors Thesis Requirements. Graduating BS Honors thesis students are required to follow the procedures in the online guide for preparing and writing their theses. The amount of copies submitted is designated by the student's advisor, typically ranging ...
Theses from 2015 PDF. Quality Factor of Horizontal Wire Dipole Antennas near Planar Conductor or Dielectric Interface, Adebayo Gabriel Adeyemi, Electrical & Computer Engineering. PDF. Evaluation of Two-Dimensional Codes for Digital Information Security in Physical Documents, Shuai Chen, Electrical & Computer Engineering. PDF
Theses from 2012 PDF. Probabilistic Analysis of Offshore Wind Turbine Soil-Structure Interaction, Wystan Carswell, Civil Engineering. PDF. Vehicle Miles Traveled (vmt) Fee Financing Alternatives: Lessons Learned and Future Opportunities, Ashley L. Costa, Civil Engineering. PDF
Master's Thesis Program Overview. The thesis program provides an opportunity for independent research in a given area of Industrial Engineering. Pursuing the thesis option allows a student to extensively probe a topic of interest under the supervision of a faculty supervisor (research advisor). Generally, pursuing a thesis allows for the ...
9. The hypothesis-model is good for research where you want to understand how something works, but I think it is ill-suited for capturing the full scope of engineering research. After all, in engineering, you're primary goal is not to learn something about how the world works, but rather to change how the world works!
Theses and dissertations published by graduate students in the Department of Engineering Management and Systems Engineering, College of Engineering, Old Dominion University since Fall 2016 are available in this collection. ... Thesis: Engineering Management Competencies: A Framework for Present and Future Engineering Environments, Christopher ...
As you write your review, consider these ways of expressing your ideas: Compare and contrast views of different authors. Criticize previous work. Highlight gaps in existing research. Show how your work relates to previous work. Identify problems, conflicts, debates, gaps. Define a research area in a new way. Question previous results.
The determination of the change in operating expenses of the Old Colony Branch of the New York, New Haven & Hartford Railroad Company after elimination of certain trains from the present schedule . McGowan, Frank M.; Yurgelun, Albert A. (Massachusetts Institute of Technology, 1948) Detection of rapid fluctuations in the earth's magnetic field.
The interlibrary loan department can help Cornell faculty, students and staff borrow or obtain copies of theses and dissertations from other institutions. Proquest Dissertations & Theses provides full text of recent (from 1996 to the present) theses and dissertations, with abstracts available from 1981 to present.
Black Lives Matter in Engineering, Too! An Environmental Justice Approach towards Equitable Decision-Making for Stormwater Management in African American Communities, Maya Elizabeth Carrasquillo. PDF. Coral Reef Restoration in the Tropical West Atlantic Amid the COVID-19 Pandemic, Linden Cheek. PDF
Industrial Engineering Graduate Theses and Dissertations . Follow. Jump to: Theses/Dissertations from 2023 PDF. Efficient Routing for Disaster Scenarios in Uncertain Networks: A Computational Study of Adaptive Algorithms for the Stochastic Canadian Traveler Problem with Multiple Agents and Destinations, Neel Chanchad. PDF.
Undergraduate Thesis. UNSW Engineering students are required to complete an undergraduate thesis project during the 4th year of their study. Students can choose from a variety of projects, with research and industry thesis options available. The standard thesis is 4 UoC (Unit of Credit) per term starting T1, T2 or T3.
Join us for the "Effective Uses of AI for Thesis and Dissertation Preparation" at the Graduate Student Open House. In this workshop you will learn to use generative artificial intelligence to enhance your thesis or dissertation. We will also discuss the benefits and challenges of integrating AI into academic research.
Cong Chen and Zeki Hayran are the winners of this year's ECE Outstanding Ph.D. Thesis Research Award. The annual award is given to graduating Ph.D. students from the School of Electrical and Computer Engineering (ECE) based on the significance of their doctoral research.
Purdue University's Materials Engineering's academic programs have been developed around all major classes of artificial materials, ceramics, metals, glasses, polymers, and semiconductors. The undergraduate and graduate programs integrate our faculty strengths across the field's four cornerstones: structure, properties, processing, and performance.
On behalf of Dr. Manuel Garcia-Perez, I would like to thank Supriya, Angana, Priyanka, Dawood, Martin, Shafik, Milton, Achyut, Ranjan and Hasan, for participating in the BSE's 3MT Thesis Competition! All great presentations and final decisions were not easy to make. Also, big thanks to our faculty judges and the audience! The winners in PhD […]
The long term goal of the Biomaterials and Interface Tissue Engineering Laboratory (BITEL) is to design nano-biomaterials and functional tissue grafts that have the ability to direct cellular responses, regulate the formation and integration of multiple tissue types, and address challenges associated with aging and mobility.
For engineering, thesis readers are chosen by the student. It is the responsibility of the student to select their thesis readers and to ensure that the readers are committed. No readers are ever assigned. For Engineering only (non-joint) the thesis committee typically consists of the advisor and two more faculty from FAS/SEAS.
Office of Neuroscience Research. MSC 8111-96-07-7122. 4370 Duncan Ave. St. Louis, Missouri 63110. [email protected]
"Talking to Cells: Biomolecular Engineering for Deep Tissue Imaging and Control of Cellular Function", Mikhail G. Shapiro, California Institute of Technology. April 11: Ivy+ Just in Time Virtual Career Fair. 1:00 p.m. - 4:00 p.m. April 11: Starr Forum on China: The rise and fall of the EAST. 5:00 p.m. in 66-110.