thesis for m tech for electronics and communication

• USF Research
• USF Libraries

Digital Commons @ USF > College of Engineering > Electrical Engineering > Theses and Dissertations

Electrical Engineering Theses and Dissertations

Theses/dissertations from 2024 2024.

Effects of Unobservable Bus States on Detection and Localization of False Data Injection Attacks in Smart Grids , Moheb Abdelmalak

Modeling the Human Learning Process Using an Industrial Steam Boiler Analogy to Design a Psychophysiological-Based Hypermedia Adaptive Automation System , Liliana María Villavicencio López

Theses/Dissertations from 2023 2023

On the Performance Enhancement of Beamspace MIMO and Non-orthogonal Multiple Access for Future Cellular Networks , Sinasi Cetinkaya

Enhancing Smart Grid Security and Reliability through Graph Signal Processing and Energy Data Analytics , Md Abul Hasnat

Fabric-Based Organic Electrochemical Transistor Towards Wearable pH Sensing Electronics , Nestor Osvaldo Marquez Rios

Novel Systems Engineering Framework Analysis of Photovoltaic Models and Equations , Peter R. Michael

Deep Learning Enhancement and Privacy-Preserving Deep Learning: A Data-Centric Approach , Hung S. Nguyen

Cyber-Physical Multi-Robot Systems in a Smart Factory: A Networked AI Agents Approach , Zixiang Nie

Multiple Access Techniques Enabling Diverse Wireless Services , Mehmet Mert Şahin

Deep Reinforcement Learning Based Optimization Techniques for Energy and Socioeconomic Systems , Salman Sadiq Shuvo

Process Automation and Robotics Engineering for Industrial Processing Systems , Drake Stimpson

Theses/Dissertations from 2022 2022

Stability and Interaction Analysis of Inverter-Based Resources in Power Grids , Li Bao

Healthcare IoT System and Network Design , Halil Ibrahim Deniz

Video Anomaly Detection: Practical Challenges for Learning Algorithms , Keval Doshi

Data-Driven State Estimation for Improved Wide Area Situational Awareness in Smart Grids , Md Jakir Hossain

Deep Learning and Feature Engineering for Human Activity Recognition: Exploiting Novel Rich Learning Representations and Sub-transfer Learning to Boost Practical Performance , Ria Kanjilal

Assistive Technologies for Independent Navigation for People with Blindness , Howard Kaplan

Diagnosis of Neurodegenerative Diseases Using Higher Order Statistical Analysis of Electroencephalography Signals , Seyed Alireza Khoshnevis

Accelerating Multiparametric MRI for Adaptive Radiotherapy , Shraddha Pandey

A Model-Based Fault Diagnosis in Dynamic Systems via Asynchronous Motors System Identification or Testing, and Control Engineering Observers , Kenelt Pierre

Improving Wireless Networking from the Learning and Security Perspectives , Zhe Qu

Improving Robustness of Deep Learning Models and Privacy-Preserving Image Denoising , Hadi Zanddizari

Theses/Dissertations from 2021 2021

A Method for Compact Representation of Heterogenous and Multivariate Time Series for Robust Classification and Visualization , Alla Abdella

Dynamical System and Parameter Identification for Power Systems , Abdullah Abdulrahman Alassaf

Phasor Domain Modeling of Type-III Wind Turbines , Mohammed Alqahtani

An Automated Framework for Connected Speech Evaluation of Neurodegenerative Disease: A Case Study in Parkinson's Disease , Sai Bharadwaj Appakaya

Investigation of CoO ATO for Solar Cells and Infrared Sheaths , Manopriya Devisetty Subramanyam

Thermal Management of Lithium-ion Batteries Using Supercapacitors , Sanskruta Dhotre

Effect of Se Composition in CdSe 1-X T eX /CdTe Solar Cells , Sheikh Tawsif Elahi

Microencapsulation of Thermochromic Materials for Thermal Storage and Energy Efficiency of Buildings , Abdullatif Hakami

Piezoelectrically-Transduced ZnO-on-Diamond Resonators with Enhanced Signal-to-Noise Ratio and Power-handling Capability for Sensing and Wireless Communication Applications , Xu Han

Preparation and Characterization of Single Layer Conducting Polymer Electrochromic and Touchchromic Devices , Sharan Kumar Indrakar

Security Attacks and Defenses in Cyber Systems: From an AI Perspective , Zhengping Luo

Power System Optimization Methods: Convex Relaxation and Benders Decomposition , Minyue Ma

Metal Oxide Sensor Array Test Bed Prototype for Diagnostic Breath Analysis , Tiffany C. Miller

Packaging of Active RF Beamforming IC Utilizing Additive Manufacturing , Ryan Murphy

Adaptive Network Slicing in Fog RAN for IoT with Heterogeneous Latency and Computing Requirements: A Deep Reinforcement Learning Approach , Almuthanna Nassar

Development of a Bipolar Radiofrequency Ablation Device for Renal Denervation , Noel Perez

Copper Electrodeposition Assisted by Hydrogen Evolution for Wearable Electronics: Interconnections and Fiber Metallization , Sabrina M. Rosa Ortiz

Theory and Application of Dielectric Rod Antennas and Arrays , Gabriel Saffold

Advanced Organic Polymers for the Nanoscale Fabrication of Fiber-based Electronics Using the Electrospinning Technique , William Serrano Garcia

Transparent Planar Micro-Electrode Array for In-Vitro Electric Field Mediated Gene Delivery , Raj Himatlal Shah

High Speed Switching for Plasma Based Electroporation , Shivangi Sharma

Development of Small-Scale Power Supplies for Wearable Medical Diagnostic Devices , Donny Stiner

Novel Approach to Integrate CAN Based Vehicle Sensors with GPS Using Adaptive Filters to Improve Localization Precision in Connected Vehicles from a Systems Engineering Perspective , Abhijit Vasili

Modeling, Control and Analysis of Inverter-Based Generators in the Power Grids , Yangkun Xu

Fiber-Based Supercapacitor for Wearable Electronics , Rohit Lallansingh Yadav

Modeling, Identification, and Stability Analysis of Inverter-Based Resources Integrated Systems , Miao Zhang

Data-Oriented Approaches towards Mobile, Network and Secure Systems , Shangqing Zhao

Strategies in Botnet Detection and Privacy Preserving Machine Learning , Di Zhuang

Theses/Dissertations from 2020 2020

Architecture design and optimization of Edge-enabled Smart Grids , Adetola B. Adeniran

Multimodal Data Fusion and Attack Detection in Recommender Systems , Mehmet Aktukmak

Artificial Intelligence Towards the Wireless Channel Modeling Communications in 5G , Saud Mobark Aldossari

Enhancement of 5G Network Performance Using Non-Orthogonal Multiple Access (NOMA) , Faeik Tayseer Al Rabee

Investigation of Machine Learning Algorithms for Intrusion Detection System in Cybersecurity , Mohmmed Alrowaily

Comprehensive Optimization Models for Voltage Regulation in PV-rich Multi-phase Distribution Systems , Ibrahim Alsaleh

Design and Implementation of Solid/Solid Phononic Crystal Structures in Lateral Extensional Thin-film Piezoelectric on Silicon Micromechanical Resonators , Abdulrahman Alsolami

Analysis of Computational Modeling Methods as Applied to Single-Crystal Organohalide Perovskites , Jon M. Bebeau

Development of a Monolithic Implantable Neural Interface from Cubic Silicon Carbide and Evaluation of Its MRI Compatibility , Mohammad Beygi

Performance Enhancement Techniques for Next-Generation Multi-Service Communication and Medical Cyber-Physical Systems , Ali Fatih Demir

Microfluidically Reconfigurable Millimeter-Wave Switches, Antenna Arrays and Filters with Fast-Actuation Using Movable Metallized Plates and Integrated Actuation , Enrique J. Gonzalez Carvajal

Multilayered Transmission Lines, Antennas and Phased Arrays with Structurally Integrated Control Electronics Using Additive Manufacturing , Merve Kacar

Cost Efficient Algorithms and Methods for Spectral Efficiency in Future Radio Access , Murat Karabacak

Design of DeLRo Autonomous Delivery Robot and AI Based Localization , Tolga Karakurt

Theory, Fabrication, and Characterization of Perovskite Phototransistor , Fatemeh Khorramshahi

Modeling and Control of Renewable Energy in Grids and Microgrids , Yin Li

Next-Generation Self-Organizing Communications Networks: Synergistic Application of Machine Learning and User-Centric Technologies , Chetana V. Murudkar

Reliability Analysis of Power Grids and its Interdependent Infrastructures: An Interaction Graph-based Approach , Upama Nakarmi

Algorithms Enabling Communications in the Presence of Adjacent Channel Interference , Berker Peköz

Electrospun Nanofibrous Membrane Based Glucose Sensor with Integration of Potentiostat Circuit , Kavyashree Puttananjegowda

Service Provisioning and Security Design in Software Defined Networks , Mohamed Rahouti

Reading and Programming Spintronic Devices for Biomimetic Applications and Fault-tolerant Memory Design , Kawsher Ahmed Roxy

Implementation of SR Flip-Flop Based PUF on FPGA for Hardware Security , Sai Praneeth Sagi

Trauma Detection Personal Locator Beacon System , Sakshi Sharma

Network Function Virtualization In Fog Networks , Nazli Siasi

Socially Aware Network User Mobility Analysis and Novel Approaches on Aerial Mobile Wireless Network Deployment , Ismail Uluturk

Spatial Stereo Sound Source Localization Optimization and CNN Based Source Feature Recognition , Cong Xu

Hybrid RF Acoustic Resonators and Arrays with Integrated Capacitive and Piezoelectric Transducers , Adnan Zaman

Theses/Dissertations from 2019 2019

Fabrication and Characterization of Electrical Energy Storage and Harvesting Energy Devices Using Gel Electrolytes , Belqasem Aljafari

Phasor Measurement Unit Data-Based Steady State and Dynamic Model Estimation , Anas Almunif

Cross Layer-based Intrusion Detection System Using Machine Learning for MANETs , Amar Amouri

Power Conditioning System on a Micro-Grid System , Tamoghna Banerjee

Thermal Response in a Field Oriented Controlled Three-phase Induction Motor , Niyem Mawenbe Bawana

Design and Development of a Wireless EEG System Integrated into a Football Helmet , Akshay V. Dunakhe

Machine Learning, Game Theory Algorithms, and Medium Access Protocols for 5G and Internet-of-Thing (IoT) Networks , Mohamed Elkourdi

Improving Stability by Enhancing Critical Fault Clearing Time , Ammara M. Ghani

RF Power Circuit Designs for Wi-Fi Applications , Krishna Manasa Gollapudi

Enhancing Secrecy and Capacity of Wireless Systems Using Directive Communications , Mohammed A. Hafez

Statistical Anomaly Detection and Mitigation of Cyber Attacks for Intelligent Transportation Systems , Ammar Haydari

Absorber and Window Study – CdSexTe1-x/CdTe Thin Film Solar Cells , Chih-An Hsu

Methods and Algorithms to Enhance the Security, Increase the Throughput, and Decrease the Synchronization Delay in 5G Networks , Asim Mazin

Piezoelectric ZnO Nanowires as a Tunable Interface Material for Opto-Electronic Applications , Anand Kumar Santhanakrishna

Security Framework for the Internet of Things Leveraging Network Telescopes and Machine Learning , Farooq Israr Ahmed Shaikh

Diversity and Network Coded 5G Wireless Network Infrastructure for Ultra-Reliable Communications , Nabeel Ibrahim Sulieman

The Design of Passive Networks with Full-Wave Component Models , Eric Valentino

CubeSat Constellation Design for Intersatellite Linking , Michael T. White

Theses/Dissertations from 2018 2018

Design of Micro-Scale Energy Harvesting Systems for Low Power Applications Using Enhanced Power Management System , Majdi M. Ababneh

A Study on the Adaptability of Immune System Principles to Wireless Sensor Network and IoT Security , Vishwa Alaparthy

Validation of Results of Smart Grid Protection through Self-Healing , Felipe Framil Assumpção

A Novel Framework to Determine Physiological Signals From Blood Flow Dynamics , Prashanth Chetlur Adithya

Advanced Search

• Email Notifications and RSS
• All Collections
• USF Faculty Publications
• Open Access Journals
• Conferences and Events
• Theses and Dissertations
• Textbooks Collection

Useful Links

• Rights Information
• SelectedWorks
• Submit Research

Home | About | Help | My Account | Accessibility Statement | Language and Diversity Statements

Privacy Copyright

• Our Promise
• Our Achievements
• Our Mission
• Proposal Writing
• System Development
• Paper Writing
• Paper Publish
• Synopsis Writing
• Thesis Writing
• Assignments
• Survey Paper
• Conference Paper
• Journal Paper
• Empirical Paper
• Journal Support
• M Tech Thesis Topics in Electronics and Communication

Choosing a subject for an MTech thesis in Electronics and Communication Engineering (ECE) entails contemplating the current advancements in technology, prevailing business trends, and your own personal interests. We offer a plethora of unique and innovative thesis topics in the field of Electronics and Communication, tailored to align with your aspirations. By availing our experts’ assistance in topic selection, you can pave the way for a successful research career. We give the list of possible topics that are significant as well as provide development for research:

• 5G Wireless Technology: Our work examines the construction of 5G technology, its execution difficulties, signal processing methods or possible applications.
• Internet of Things (IoT): We discover regions like IoT frameworks, Security in IoT devices, IoT in smart cities, or IoT in healthcare frameworks.
• VLSI Design and Microelectronics: Our aim is to concentrate on improved VLSI circuit plan, less-power VLSI, FPGA construction or microelectronic engineering.
• Embedded Systems: In this, we research enhanced embedded system plans, real-time operating models or applications of embedded systems in automation.
• Optical Communications: We research topics such as fiber optic interaction, optical networks, photonics or the constructions of novel optical resources and devices.
• Wireless Sensor Networks (WSN): Here, we discover the plan, optimization and applications of WSN in different domains such as environmental monitoring or business automation.
• Satellite and Space Communications: Our work is to examine satellite interaction frameworks, in-depth space communication, or the construction of payloads for satellites.
• Digital Signal Processing (DSP): In this, the study regions could contain speech signal processing, image processing, biomedical signal processing, or DSP algorithms.
• Radar and Sonar Systems: Examine innovative radar signal processing, synthetic aperture radar, sonar system design, or radar communication models.
• Machine Learning and AI in ECE: Our work discovers the application of AI and machine learning in regions like signal processing, communication framework or fault diagnosis in electronic models.
• Nanotechnology in Electronics: We examine the utilization of nanomaterials in electronic devices, nano-electronics or the role of nanotechnology in interaction frameworks.
• RF and Microwave Engineering: RF and Microwave engineering topics contain antenna design, microwave circuit design, RF energy harvesting or RF propagation studies.
• Quantum Computing and Quantum Communications: Our aim is to research the principles of quantum computing, quantum cryptography, or the construction of quantum interaction models.
• Power Electronics and Renewable Energy Systems: In our work, we discover creations in power electronics, combination of renewable energy sources into communication systems or smart grid technologies.
• Advanced Control Systems: Study in adaptive control, robotics, automation or the application of control theory in interaction frameworks.

How do I find a good topic for my master’s thesis?

            Identifying the best topic for your master’s thesis needs an integration of research, self-examination and discussion. The following are several steps that we offer to direct you in choosing a relevant and emerging topic:

• Reflect on Your Interests and Strengths: Initiate by taking into account the subjects and regions inside your domain that you are more interested in. Consider coursework, projects, or particular topics that have motivated your passion.
• Review past Coursework and Projects: Review at your existing coursework, projects or papers. Sometimes, a great thesis title will evolve from work you have initiated earlier.
• Explore Current Trends and Research: Remain updated with the new styles and research in your domain. Institutional magazines, meetings, and latest publications will provide you thoughts of what topics are present and appropriate.
• Consult your Advisor: Converse your thoughts with your institutional guide. They will provide important understandings, recommend materials and assist you improve your topic.
• Identify a Research Gap: Read broadly in your field of passion and try to find gaps in the previous research. Your thesis could have goals to occupy any of the gaps.
• Consider Practicality and Resources: Confirm the topic you selected is feasible. Take into account the duration you have, the materials accessible, and the opportunity of the research needed.
• Evaluate the Scope and Depth: Your topic should not be too extensive or too small. It must permit you to involve in-depth into the particular region while being controllable through the restrictions of your platform.
• Seek Feedback: Converse your thoughts with teammates, professors, and experts in the domain. They offer various angles and feedback that you might not have taken into account.
• Align with Career Goals: Take into account in what way your thesis topic suits with your future professional aim. Selecting a topic that is appropriate to your chosen professional path can be beneficial.
• Originality and Interest: Goal for a topic that is novel and passionate to you. A true passion in your study will assist and encourage during the writing process.
• Ethical Considerations: Make sure that your selected topic achieves the moral instructions of research and study in your domain, especially if it contains human or animal subjects.
• Literature Review: Initiate a preliminary literature survey to confirm there is sufficient source to help your research. This also assists in narrowing down or improving your topic.

MTech Project Ideas in Electronics and Communication

For over two decades, we have been at the forefront of guiding scholars like yourself, offering a plethora of innovative and groundbreaking ideas. Prepare to be mesmerized by our unparalleled work, as we guarantee the highest quality MTech Project Ideas in Electronics and Communication delivered by seasoned professionals. We delve into the depths of research, identifying the gaps that lie within your chosen field. With our expertise, we will suggest a selection of exceptional topics and ideas that will captivate both you and your audience.

• Simulation and Analysis: The Effect of Mobility on IPTV (VOD) Over Wi-max Using OPNET
• Comparison between LTE and WiMAX based on system level simulation using OPNET modeler (release 16)
• OPNET-based analysis of MTU impact on application performance
• Performance comparision of IEEE 802.11g WLANs with respect to increasing number of workstations using OPNET modeller
• Gigabit Ethernet with Wireless Extension: OPNET Modelling and Performance Study
• Wireless Campus Network Design and Optimization Based on OPNET
• OPNET based simulation modeling and analysis of DoS attack for digital substation
• Research on networking strategy and optimization simulation of process level network in smart substation based on OPNET
• Modeling and Simulation of Network-on-Chip Routing Algorithm Based on OPNET
• An OPNET-based simulation approach for the deployment of WirelessHART
• Channel model simulation for underwater acoustic sensor networks using OPNET
• Advanced trajectory management techniques for mobile nodes in OPNET Modeler environment
• Research on the effects of transport protocols on the application performance based on OPNET
• Application Reliability Evaluation for Tactical Internet Based on OPNET
• Simulation and Analysis of Heterogeneous Traffic of Space-Ground Integrated Information Network Based on OPNET
• Integrity protection in UMTS Radio Access Network – Simulation approach under OPNET
• Mobile Ad Hoc Network of simulation framework based on OPNET
• Assessing readiness of IP networks to support H.323 desktop videoconferencing services over various scheduling techniques using OPNET
• Dynamic Area of Interest Management for Massively Multiplayer Online Games Using OPNET
• Expansion of OPNET modeler’s SIP model for performance evaluation of Hierarchical Call Routing in NGN

MILESTONE 1: Research Proposal

Finalize journal (indexing).

Before sit down to research proposal writing, we need to decide exact journals. For e.g. SCI, SCI-E, ISI, SCOPUS.

Research Subject Selection

As a doctoral student, subject selection is a big problem. Phdservices.org has the team of world class experts who experience in assisting all subjects. When you decide to work in networking, we assign our experts in your specific area for assistance.

Research Topic Selection

We helping you with right and perfect topic selection, which sound interesting to the other fellows of your committee. For e.g. if your interest in networking, the research topic is VANET / MANET / any other

Literature Survey Writing

To ensure the novelty of research, we find research gaps in 50+ latest benchmark papers (IEEE, Springer, Elsevier, MDPI, Hindawi, etc.)

Case Study Writing

After literature survey, we get the main issue/problem that your research topic will aim to resolve and elegant writing support to identify relevance of the issue.

Problem Statement

Based on the research gaps finding and importance of your research, we conclude the appropriate and specific problem statement.

Writing Research Proposal

Writing a good research proposal has need of lot of time. We only span a few to cover all major aspects (reference papers collection, deficiency finding, drawing system architecture, highlights novelty)

MILESTONE 2: System Development

Fix implementation plan.

We prepare a clear project implementation plan that narrates your proposal in step-by step and it contains Software and OS specification. We recommend you very suitable tools/software that fit for your concept.

Tools/Plan Approval

We get the approval for implementation tool, software, programing language and finally implementation plan to start development process.

Pseudocode Description

Our source code is original since we write the code after pseudocodes, algorithm writing and mathematical equation derivations.

Develop Proposal Idea

We implement our novel idea in step-by-step process that given in implementation plan. We can help scholars in implementation.

Comparison/Experiments

We perform the comparison between proposed and existing schemes in both quantitative and qualitative manner since it is most crucial part of any journal paper.

Graphs, Results, Analysis Table

We evaluate and analyze the project results by plotting graphs, numerical results computation, and broader discussion of quantitative results in table.

Project Deliverables

For every project order, we deliver the following: reference papers, source codes screenshots, project video, installation and running procedures.

MILESTONE 3: Paper Writing

Choosing right format.

We intend to write a paper in customized layout. If you are interesting in any specific journal, we ready to support you. Otherwise we prepare in IEEE transaction level.

Collecting Reliable Resources

Before paper writing, we collect reliable resources such as 50+ journal papers, magazines, news, encyclopedia (books), benchmark datasets, and online resources.

Writing Rough Draft

We create an outline of a paper at first and then writing under each heading and sub-headings. It consists of novel idea and resources

Proofreading & Formatting

We must proofread and formatting a paper to fix typesetting errors, and avoiding misspelled words, misplaced punctuation marks, and so on

Native English Writing

We check the communication of a paper by rewriting with native English writers who accomplish their English literature in University of Oxford.

Scrutinizing Paper Quality

We examine the paper quality by top-experts who can easily fix the issues in journal paper writing and also confirm the level of journal paper (SCI, Scopus or Normal).

Plagiarism Checking

We at phdservices.org is 100% guarantee for original journal paper writing. We never use previously published works.

MILESTONE 4: Paper Publication

Finding apt journal.

We play crucial role in this step since this is very important for scholar’s future. Our experts will help you in choosing high Impact Factor (SJR) journals for publishing.

Lay Paper to Submit

We organize your paper for journal submission, which covers the preparation of Authors Biography, Cover Letter, Highlights of Novelty, and Suggested Reviewers.

Paper Submission

We upload paper with submit all prerequisites that are required in journal. We completely remove frustration in paper publishing.

Paper Status Tracking

We track your paper status and answering the questions raise before review process and also we giving you frequent updates for your paper received from journal.

Revising Paper Precisely

When we receive decision for revising paper, we get ready to prepare the point-point response to address all reviewers query and resubmit it to catch final acceptance.

Get Accept & e-Proofing

We receive final mail for acceptance confirmation letter and editors send e-proofing and licensing to ensure the originality.

Publishing Paper

Paper published in online and we inform you with paper title, authors information, journal name volume, issue number, page number, and DOI link

MILESTONE 5: Thesis Writing

Identifying university format.

We pay special attention for your thesis writing and our 100+ thesis writers are proficient and clear in writing thesis for all university formats.

Gathering Adequate Resources

We collect primary and adequate resources for writing well-structured thesis using published research articles, 150+ reputed reference papers, writing plan, and so on.

Writing Thesis (Preliminary)

We write thesis in chapter-by-chapter without any empirical mistakes and we completely provide plagiarism-free thesis.

Skimming & Reading

Skimming involve reading the thesis and looking abstract, conclusions, sections, & sub-sections, paragraphs, sentences & words and writing thesis chorological order of papers.

Fixing Crosscutting Issues

This step is tricky when write thesis by amateurs. Proofreading and formatting is made by our world class thesis writers who avoid verbose, and brainstorming for significant writing.

Organize Thesis Chapters

We organize thesis chapters by completing the following: elaborate chapter, structuring chapters, flow of writing, citations correction, etc.

Writing Thesis (Final Version)

We attention to details of importance of thesis contribution, well-illustrated literature review, sharp and broad results and discussion and relevant applications study.

How PhDservices.org deal with significant issues ?

1. novel ideas.

Novelty is essential for a PhD degree. Our experts are bringing quality of being novel ideas in the particular research area. It can be only determined by after thorough literature search (state-of-the-art works published in IEEE, Springer, Elsevier, ACM, ScienceDirect, Inderscience, and so on). SCI and SCOPUS journals reviewers and editors will always demand “Novelty” for each publishing work. Our experts have in-depth knowledge in all major and sub-research fields to introduce New Methods and Ideas. MAKING NOVEL IDEAS IS THE ONLY WAY OF WINNING PHD.

2. Plagiarism-Free

To improve the quality and originality of works, we are strictly avoiding plagiarism since plagiarism is not allowed and acceptable for any type journals (SCI, SCI-E, or Scopus) in editorial and reviewer point of view. We have software named as “Anti-Plagiarism Software” that examines the similarity score for documents with good accuracy. We consist of various plagiarism tools like Viper, Turnitin, Students and scholars can get your work in Zero Tolerance to Plagiarism. DONT WORRY ABOUT PHD, WE WILL TAKE CARE OF EVERYTHING.

3. Confidential Info

We intended to keep your personal and technical information in secret and it is a basic worry for all scholars.

• Technical Info: We never share your technical details to any other scholar since we know the importance of time and resources that are giving us by scholars.
• Personal Info: We restricted to access scholars personal details by our experts. Our organization leading team will have your basic and necessary info for scholars.

CONFIDENTIALITY AND PRIVACY OF INFORMATION HELD IS OF VITAL IMPORTANCE AT PHDSERVICES.ORG. WE HONEST FOR ALL CUSTOMERS.

4. Publication

Most of the PhD consultancy services will end their services in Paper Writing, but our PhDservices.org is different from others by giving guarantee for both paper writing and publication in reputed journals. With our 18+ year of experience in delivering PhD services, we meet all requirements of journals (reviewers, editors, and editor-in-chief) for rapid publications. From the beginning of paper writing, we lay our smart works. PUBLICATION IS A ROOT FOR PHD DEGREE. WE LIKE A FRUIT FOR GIVING SWEET FEELING FOR ALL SCHOLARS.

5. No Duplication

After completion of your work, it does not available in our library i.e. we erased after completion of your PhD work so we avoid of giving duplicate contents for scholars. This step makes our experts to bringing new ideas, applications, methodologies and algorithms. Our work is more standard, quality and universal. Everything we make it as a new for all scholars. INNOVATION IS THE ABILITY TO SEE THE ORIGINALITY. EXPLORATION IS OUR ENGINE THAT DRIVES INNOVATION SO LET’S ALL GO EXPLORING.

Client Reviews

I ordered a research proposal in the research area of Wireless Communications and it was as very good as I can catch it.

I had wishes to complete implementation using latest software/tools and I had no idea of where to order it. My friend suggested this place and it delivers what I expect.

It really good platform to get all PhD services and I have used it many times because of reasonable price, best customer services, and high quality.

My colleague recommended this service to me and I’m delighted their services. They guide me a lot and given worthy contents for my research paper.

I’m never disappointed at any kind of service. Till I’m work with professional writers and getting lot of opportunities.

- Christopher

Once I am entered this organization I was just felt relax because lots of my colleagues and family relations were suggested to use this service and I received best thesis writing.

I recommend phdservices.org. They have professional writers for all type of writing (proposal, paper, thesis, assignment) support at affordable price.

You guys did a great job saved more money and time. I will keep working with you and I recommend to others also.

These experts are fast, knowledgeable, and dedicated to work under a short deadline. I had get good conference paper in short span.

Guys! You are the great and real experts for paper writing since it exactly matches with my demand. I will approach again.

I am fully satisfied with thesis writing. Thank you for your faultless service and soon I come back again.

Trusted customer service that you offer for me. I don’t have any cons to say.

I was at the edge of my doctorate graduation since my thesis is totally unconnected chapters. You people did a magic and I get my complete thesis!!!

- Abdul Mohammed

Good family environment with collaboration, and lot of hardworking team who actually share their knowledge by offering PhD Services.

I enjoyed huge when working with PhD services. I was asked several questions about my system development and I had wondered of smooth, dedication and caring.

I had not provided any specific requirements for my proposal work, but you guys are very awesome because I’m received proper proposal. Thank you!

- Bhanuprasad

I was read my entire research proposal and I liked concept suits for my research issues. Thank you so much for your efforts.

- Ghulam Nabi

I am extremely happy with your project development support and source codes are easily understanding and executed.

Hi!!! You guys supported me a lot. Thank you and I am 100% satisfied with publication service.

- Abhimanyu

I had found this as a wonderful platform for scholars so I highly recommend this service to all. I ordered thesis proposal and they covered everything. Thank you so much!!!

Related Pages

Academia.edu no longer supports Internet Explorer.

To browse Academia.edu and the wider internet faster and more securely, please take a few seconds to  upgrade your browser .

Enter the email address you signed up with and we'll email you a reset link.

• We're Hiring!
• Help Center

M.TECH THESIS.pdf

The user has requested enhancement of the downloaded file. All in-text references underlined in blue are added to the original document and are linked to publications on ResearchGate, letting you access and read them immediately.

Related Papers

Adharsh Charvak

Raghda Hafez

Francis Francis

Karjongko Mekaring Jangka

Journal ijmr.net.in(UGC Approved)

Now the " Make in India " campaign is the most lightening subject. It aimed at making India a world attractive manufacturing hub. It aims to pull out investors from different countries and make them to manufacture in India. The vision behind this campaign is to put the country on the global manufacturing map. It also desires to facilitate the inflow of new technology and capital, while creating millions of jobs. Make in India is an ambitious project, but there is a need to bring some changes in existing policies to make the India the powerhouse of manufacturing sector in the world. Make in India is a good opportunity for all Indians. It will generate crores of direct and indirect job opportunities. On this back ground, the researcher feels, it is necessary to study and understand the different opportunities and challenges in achieving the objectives of this campaign. The data used in this paper is secondary in nature. Through the statistical data and gap between demand and supply, we can understand the opportunities for the manufacturing sector in India. If this campaign got success, India can overcome the problems of unemployment, brain drain and it could get success in using local talent for the development of local economy, creating Brand India etc. So the objectives for the study are: to understand the benefits of the campaign, to study the opportunities and challenges before 'Make in India Campaign, to study about the start up of Make in India campaign and to study about the urgent steps to be taken to support the campaign. The Government needs to invest in research and development and encourage innovation. There is an urgent need to develop different business models for sustainable development. To increase investor sentiment, there is need to improve the ease of business, improve the employability of management and engineering students, infrastructural development, capacity addition in the power sector to satisfy energy need of industries. The present paper contains different models of interaction between academia and industries for the skill development among the human resources.

Neeraj Rathore

Modeling and Optimization co2 corrosion penetration rate crude oil transportation process by pipeline

Rania Elrifai

Thesis's Persentation

Ayedh Al hajeri

rohan mishra

Loading Preview

Sorry, preview is currently unavailable. You can download the paper by clicking the button above.

RELATED PAPERS

Samuel Puker

Johar Altaf

New Trends and Issues Proceedings on Advances in Pure and Applied Sciences

Alwin Panjwani

Mesfin Seleshi Haile

Imre hronszky

Náyade Sharon

Muhammad Mustafa Qamar

IAEME Publication

Euro Asia International Journals

Vasiliki Syngouna

Ijariit Journal

Marilyn Washington

Archer Ebenezer

Pauline de Souza

RELATED TOPICS

•   We're Hiring!
•   Help Center
• Find new research papers in:
• Health Sciences
• Earth Sciences
• Cognitive Science
• Mathematics
• Computer Science
• Academia ©2024

M Tech (ECE)

M.Tech. Electronics & Communication Engineering (ECE)   is a flagship graduate program offered by the ECE department.

Eligibility

• BE/BTech or equivalent, with second class or higher.
• Must have appeared in the GATE (EC, EE) exam within the last three years with a valid GATE score

The requirement of GATE or any other qualifying exam is waived for students with a Bachelor’s degree from a centrally funded technical institution (CFTIs ) with a CGPA of 8.0 or above.

How to Apply

• Register and apply on the institute   Online Admissions Application Portal .

Application and Selection Process

• A combination of the GATE score and the interview performance will determine your admission offer.
• Candidates will be selected based on 70% weightage for GATE score and 30% weightage for interview.
• Selection of CFTI candidates is based on 70% CAM (Career Analysis Marks) + 30% performance in the Interview.
• Offers will be made on the Common Offer Admissions Portal (COAP).

Important dates

Please refer to the institute  Important Dates  webpage for details.

Fees and Scholarships

Please refer to the institute  Fees and Scholarships  webpage for details.

Course Requirements

The course requirements in the program include three compulsory core courses and at least one course from each of the three broad baskets of courses listed below. The coursework enables to the students to specialise in Communication, Networks, High Frequency Circuits & Systems, and Signal and Information Sciences. Students are required to complete a minimum of 64 credits based on the following structure.

Compulsory/Core Courses:   9 credits Random ProcessesDigital CommunicationCommunication Laboratory.In addition, students are required to take at least one course each from the following three Stream Pools .

Frequently Asked Questions : M Tech. (ECE)

  How do I get admitted to MTech (ECE)?  

To get admitted to MTech (ECE), you must have appeared in the GATE (EC) exam within the last three years. You should then apply for the  PG programs in IISc  by mentioning MTech ECE as one of your choices. Shortlisted applicants will then be called for an online technical video interview. A combination of the GATE score and the interview performance will determine your admission offer.

• How do I prepare for the MTech (ECE) technical interview?  

Shortlisted candidates will be invited for an in-person interview. The interview will test candidates on basics and will be within the undergraduate curriculum / GATE syllabus.

• How are campus placements for MTech (ECE) students? What are the areas in which students can start a career after MTech in (ECE)?  

MTech (ECE) is a new master’s program in ECE, IISc, started in 2021. It contains three focus areas that are impactful in designing the next generation of communication systems: 1. Communications & Networking

2. Signal and Information Sciences

3. High Frequency Circuits and Systems. 

The program is broad and offers students to specialise in different areas mentioned above leading to a wide array of specialised job opportunities. Some example areas in which one can start a career after the program include modem systems, wireless baseband systems, RF/Analog IC design, multimedia (camera/video) systems, machine learning systems, data scientist roles, and several more.

The placement opportunities are as good as other leading institutes in the country and the world. If you do well in the program, you can be sure of a good position in top companies with attractive pay packages.

• What is the difference between MTech (ECE) and other programs such as MTech (Microelectronics and VLSI), MTech (Signal Processing), MTech (Artificial Intelligence) and MTech (DESE)?  

MTech (ECE) is the flagship program of the ECE department at IISc. The ECE department also participates in three other masters programs: MTech (Microelectronics and VLSI), MTech (Signal Processing), MTech (Artificial Intelligence). The difference among these programs are primarily in the core courses of these programs. The MTech (ECE) program positions students to make impactful contributions in industry, academia in the broad area of communications. However, there are several aspects of communications that overlap with VLSI design, signal processing and artificial intelligence. Thus all these programs interact with one another and students from several of these programs often take similar courses.

The MTech (ECE) program offers the flexibility to start from basics of communications and explore interactions with several related areas. At least half the course requirement in MTech (ECE) consists of electives. Thus, the students have the flexibility to choose from a wide array of other courses in the institute in consultation with the faculty advisor.

• Suppose I join MTech (ECE), but after a term perhaps I wish to switch to Signal Processing/VLSI. Is there a way?  

  As mentioned earlier, there is enough flexibility in the MTech (ECE) program that allows a student to take signal processing or VLSI design related courses and specialise in these areas as part of the MTech (ECE) program. The only requirement in the MTech ECE program involves taking the core courses and a few other courses that satisfy the breadth requirement of different areas. On successful completion of the program an MTech (ECE) degree will be awarded. It must be reiterated that most reputed recruiters look for acquired skills than nomenclature of the degree.

• Do I get to choose an area/advisor for MTech project? What is the procedure?  

  The project forms an important part of the masters program at IISc. The advisor-advisee assignment for the projects is done towards the end of the first semester taking into account the area of interest of the student and mutual consent of the faculty and the student. Please visit this  page  for current areas of interest and specializations of faculty members of the Department.  Projects are allotted using a  set procedure .

• How exactly is MTech (Res) different from MTech? Does one get to do more research?  

  MTech (Research) is a research program while MTech is a course based program. Thus the course requirements of MTech (Research) are much less than that of the MTech program. Also, thesis requirements of the MTech (Research) program correspond to those that are typically desired in peer reviewed high quality publications. The project requirements of the MTech program are slightly different and can be achieved through research work, publications, interesting prototypes, system building etc. The scope of work is usually decided based on mutual discussions between the student and the faculty advisor.

• Can I take courses from other departments? Is a course common for students from Masters, PhD, undergrad, other departments? How are they graded considering the wide difference in background?  

  In MTech (ECE), apart from the core courses and the breadth requirement courses (which roughly account for six courses), the remaining courses (roughly another 6) are electives, which can be taken from within or outside the department. It is common for courses to be taken by both Masters and PhD students. We usually observe that Masters students do as well as the PhD students. The background of the student does not matter after the first semester. In the first semester, the courses are taught assuming very minimal background.

• Suppose I have a job after Bachelors in ECE domain; what does the Masters programme at ECE add to my career profile? What are some advantages?  

  A master’s degree (ECE) offers to strengthen fundamental concepts in advanced areas like communications, signal processing, high frequency circuits, machine learning, etc. A bachelor’s degree often does not provide enough training to contribute to cutting edge work in these areas. A master’s degree also provides a stronger foundation training such that one is able to seamless move across areas easily during the course of professional career growth. Our master’s students also end up as leaders in their technical teams by virtue of their ability to impact technology in industry.

• Having joined for Masters if I wish to convert/continue for a PhD what is the procedure?  

  Masters students have the option to convert to the PhD program after the first or second semester based on their satisfying a minimum performance criterion during their first year. In this case, the student is treated like a direct PhD student, i.e. students who have been admitted to the PhD program with only a bachelors degree.  A graduating student is given both an MTech and a PhD degree in this case.

• What are some Masters projects? What do they involve?  

  MTech ECE is a new program in which MTech CN has been significantly modified. An example list of masters projects for the MTech (ECE) students floated last year is  Available Here  (list of projects)

• How different is MTech (Microelectronics & VLSI) different from MTech at DESE? Why was cut-off GATE score so high for MTech (Microelectronics & VLSI) whereas it appears to be quite relaxed for MTech at DESE?  

MTech at DESE has been selecting students through a rigorous interview process. On the other hand, MTech (Microelectronics & VLSI) program used to have a small number of seats and was admitting qualified students directly without an interview. Since 2019 the strength of the program has been increased, and an interview process has been initiated. 

• What are the active research areas under ECE?  

  The faculty in the ECE department broadly work in the areas of communication and networks, signal processing, machine learning, microelectronics, photonics, RF and microwave engineering and cyber-physical systems. Please look up individual  faculty pages for a more current view of topics they work on.

What are chances of getting into foreign universities for higher studies after an MTech in IISc?  

  An MTech degree from IISc can significantly improve your chances of getting admitted to a top ranked doctoral programs across the world. 

• What will be the course curriculum of MTech (ECE)?  

Please see above for details on the course structure. There is a total requirement of 36 course credits consisting of 9 core course credits and another nine credits from three stream pools: a. Communication and Networks, b. Signal and Information Sciences, c. High Frequency Circuits and Systems. The rest of the 18 credits can be taken from ECE or other departments in consultation with the faculty advisor. As you can see, the curriculum offers plenty of flexibility to take courses in other areas such as AI/ML, Data Structures, Signal Processing, VLSI Circuits, Antennas, etc. The project contributes to an additional 28 credits. The project offers a unique opportunity to work on impactful problems and latest techniques.

• Suppose I get admitted to the MTech (ECE) program and wish to train in emerging areas like AI. What can I do?

 Several courses such as Random Processes (core course), Matrix Theory (stream pool course), and Foundations of Machine Learning (stream pool course) in MTech ECE are also taken as core courses by students of MTech AI. Thus, students get trained in basics that are relevant across different areas. MTech (ECE) students will seamlessly be able to work on various AI applications.

• What kind of student life can I expect at IISc?  

IISc will offer you a memorable student experience during your stay here. You can take a look  here  for some excerpts on student perspectives.

• How does the MTech (ECE) program differ from the MTech (Online) program in ECE?

 The MTech (Online) program in ECE is meant for professionals working in the industry. These students need to be sponsored by the organisation in which they are currently employed and need to apply through the organisation. On the other hand, the MTech (ECE) program is a full-time residential program where classes are ideally held offline.

• Are there any entrepreneurship opportunities that one can pursue at IISc?  

The society for Innovation and Development (SID) and AI and Robotics Technology Park (ARTPARK) at IISc offer several opportunities to translate ideas into technical products.

• In which COAP round will MTech (ECE) offers be announced?

 A vast majority of offers will be announced in the first round itself. Very minor additions can be expected in subsequent rounds.

• Can we come to the interviews with parents/siblings?

 Certainly, they can accompany you when you visit the department for the interview.

• What is the highest/average package for MTech ECE batch graduating in 2023?

 Highest package was around Rs. 49 lakhs per annum while the average was around Rs. 33 lakhs per annum.

MTech Projects for Electronics and Electrical Engineering

The term MTech stands for Master of Technology and it is a professional master’s degree in the engineering field. The duration of this degree is two years and the eligible candidates for this degree program are the students who have finished their BE or BTech degree program. The admissions of this degree are based on the rank attained in the entrance exams of GATE or PGECET. This master’s degree offers several specializations across India like ECE, Power Electronics, Embedded, Civil, Computer Science, Chemical, Electrical, VLSI, Mechanical, Software Engineering , etc. This article list outs Mtech projects for ECE and EEE students and MATLAB based projects for Mtech students.

MTech Projects for ECE and EEE Students

Mtech projects mainly include hardware, software, simulation, MATLAB , etc. Here is the list of Mtech projects for ECE and EEE students in various categories.

M.Tech Projects for ECE Students

The list of MTech projects for ECE students is discussed below.

Enhancement of Transportation Safety for School Children using RFID

This project implements a system to enhance the safety of the transport system for school children using RFID technology . By using this system, we can monitor the pickup and drop off the school children. This system includes two major units like a school unit and a bus unit.

The bus unit is used to notice the children when they board or leave the bus. If the children did not board or leave the bus, then this information can be transmitted to the school unit immediately.

Implementation of Mobile Technology for Atomization of Vehicle Parking System

This project implements the parking system to make the existing system easier to use. In this system, the user has to book a parking slot through an SMS. Once the user gets a password then he has to enter the parking area so that he will get access to park the vehicle.

Design of ATM Terminal using Fingerprint Recognition

Generally, the traditional ATM terminal-based customer identification system mainly depends on bank cards, passwords. So such kind of methods doesn’t measure perfectly and functions are extremely single. To solve the bugs in traditional systems, a new customer identification system using the ATM terminal is implemented by using a fingerprint to provide the security.

Finger Print Recognition based PC Login System

We know that biometric technology uses different characteristics of physical otherwise behavioral to recognize the users. This project implements a fingerprint identification based system for PC login.

ARTS – Advanced Rural Transportation Systems

ARTS provide information regarding transport systems and remote road. The best examples of this system mainly include reporting of weather conditions, automated road & directional information. This kind of data is precious to travelers who are traveling to rural areas. This system was implemented in the US & will be more beneficial to rural areas in countries like India.

Detection System of Accident using Accelerometer

This project implements a detection system for the accident of the vehicle using an accelerometer. We know that vehicle security or traveling is the main worry for everybody. Once the accident occurs, then an accident detection system updates the police control room.

The sensor like an accelerometer is used to detect the sudden change of gravitational force in the vehicle because of the accident, and then the microcontroller switches the GSM modem to send an SMS to a concerned mobile number. The reliability and stability of the system can be tested through the product design in different conditions.

FIR Filter Investigation for Improving Delay Reduction & Power Efficiency

FIR design can be done with the help of adders, multiplications, and coefficients. The algorithm like MCM (Multiple Constant Multiplication) is used while designing the FIR filter to reduce the circuit complexity, increase the delay & multiplication using the huge area. These issues are optimized by employing a new method like digit-serial MCM like delay, utilization, and complexity.

Partial Reconfigurable based FIR Filter Design using FPGA

This project designs a partial reconfigurable based FIR filter with systolic DA (Distributed Arithmetic) design optimized for field-programmable gate arrays (FPGAs). A completely pipelined architecture is used for implementing low power, efficient computationally, high-speed FIR (Finite Impulse Response) filter. A new design is implemented for the LUT (Look-Up Table) in distributed arithmetic for decreasing the limited reconfiguration time.

This filter is reconfigured dynamically to understand the characteristics of LPF & HPF by altering the coefficients of FIR within the partial reconfiguration module. The implementation of this design can be done with the help of an FPGA kit like XUP Virtex 5 LX110T. The design of the filter will show the development in design time & efficiency.

Health Monitoring System in Emergency using IoT

This project implements a system to monitor the patient’s body in 24X7 through an IoT. By using this system, the patient’s physiological parameters can be monitored every 15 sec. The proposed system is accountable for gathering the data from the heartbeat rate, pulse & temperature of the body & transmits the collected data to the IoT Cloud platform through WIFI-module.

At last, the patient’s health condition can be stored within the cloud. This system allows the concerned person like a medical specialist to check the patient’s health and condition continuously on the cloud server. This project provides effective and suitable health facilities for the patients.

Autonomous Farming Robot using WSN & IoT

Emerging technology like IoT (Internet of things) shows the upcoming of networking & computing. The best application of IoT based WSN is the monitoring of agricultural from a distant area. The IoT based WSN faces many problems because of the drastic changes within the atmosphere. This proposed system implements a network for a mobile robot using an IoT for farming applications.

The robots like master and slave use the WSN which are connected through the NRF protocol to share the reliable sensor data. This project uses image processing and sensors where image processing is used to detect the weeds & sensors are used for detecting light, humidity, moisture, etc

M.Tech Projects for EEE Students

The list of Mtech projects for EEE students is discussed below. The concepts of electrical projects mainly include power electronics, renewable energy, and m tech projects in electrical power systems .

Integration of Solar PV & Battery Storage using NPC Inverter with a Three-Level

This project is used to implement a grid-connected system like an NPC inverter by integrating a solar PV system through battery storage. In this project, a control algorithm is presented to control the power transmission among the PV of solar, grid, and battery which instantaneously provides MPPT (maximum power point tracking) operation of the solar PV.

This system’s effectiveness can be investigated through the simulation of numerous situations like charging and discharging of the battery in different solar irradiation levels.

PF Correction for 3-Phase PWM AC Chopper based Induction Motor Drive System with HBCC Method This project proposes a system like a drive system for induction motor fed from a 3-phase PWM AC chopper. This project is used to attain input PFC of an induction motor drive system based on various operating conditions.

This power factor correction can be achieved through constantly forcing the actual 3-phase current supply through the equivalent reference currents, which are produced in phase with voltage supplies by using HBCC (hysteresis band current control) method.

Intelligent Controlling of Maximum Power Tracking & Inverter Hysteresis Current for PV Systems Connected by Grid

This project implements a tracking system for maximum power point using neural networks for a PV system connected by the grid. This system is built with a PV array, a 3-phase inverter, a boost converter & a grid.

The neural network in this system can guess the necessary terminal voltage in the array for attaining the highest power. In this system, the duty cycle can be measured as well as the switches for the boost converter are controlled. Hysteresis current method is given to the 3-phase inverter so that the converter output voltage remains stable at any necessary set point. The whole system can be simulated through MATLAB or SIMULINK software under unexpected changes in weather conditions.

External Inductor Design for Improving Voltage Controlled DSTATCOM Performance

The term DSTATCOM stands for distribution static compensator. It is mainly used for load voltage regulation & its performance mainly depends upon the feeder impedance. But, a voltage regulation study for analyzing the DSTATCOM performance mainly depends on the parameters of the network. This system provides a complete design study, operation & flexible control of a DSTATCOM operating in voltage control mode.

A complete voltage regulation capacity analysis for DSTATCOM is presented in this system under a variety of feeder impedances. After that, a standard design process to calculate the external inductor value is presented. A generation system for dynamic reference load voltage is also implemented. This system allows DSTATCOM to give backload reactive power in normal operation & also gives voltage support throughout disturbances.

Optimization of Parameter in a Permanent Magnet Brushless Motor for Fuzzy Logic Control

This project implements a method for optimizing different parameters in a very fuzzy logic control of a Permanent Magnet Brushless Motor. This system utilizes an optimization of a neural network to conclude all the fixed parameters in the control strategy of fuzzy logic.

The vector control analysis system & the fuzzy controller are demonstrated using the MATLAB simulation to equivalent their performance. The main purpose of this project is to enhance the fuzzy logic management system performance.

Dynamic Voltage Restorer Real-Time Simulation using RTDS & dSPACE

The proposed system uses DVR (Dynamic Voltage Restorer) for balancing the disturbances of the electric power grid to protect sensitive loads.

The dynamic voltage restorer includes different power electronics converters like AC to DC, DC to AC converters, control system & a series transformer. This management system was simulated on RTDs (Real-Time Digital Simulator) using HTL (Hardware in the Loop) on dSPACE.

In Real-Time Digital Simulators, the power circuits were designed and control logic was developed on dPSACE. To examine the dynamic performance of the dynamic voltage restorers, the simulation tests are executed.

MPPT in Grid Connected Wind Plant by using Switched Reluctance Generator & Intelligent Controller

This project implements intelligent controllers like an MPPT system for an SRG (switched reluctance generator) driven through a wind turbine for obtaining the highest power. The smart controller systems are the ANN controller (artificial neural network) & the FL controller (fuzzy logic). These controllers will control the rotational speed of the wind turbine by altering the turn-off angle in the switched reluctance generator.

The wind plant can be allied to the grid by using two maximize power transformers and a DC-AC inverter system. The simulation of these systems can be done using MATLAB.

Solid State & Soft-Switching Transformer

This project implements a new topology for a completely bidirectional solid-state & soft-switching transformer. The features of minimum topology are 12 major devices & a transformer with high-frequency. It does not employ an intermediate DC voltage link but gives sinusoidal i/p as well as o/p voltages.

These transformers are mainly configured for interfacing with two or multi-terminal DC, single or multiphase AC systems. The circuit-like auxiliary resonant is used to create a zero voltage switching states for major devices & helps in managing interactions through parasitic parts of the circuit. The modularized structure allows series or parallel stacking of converter cells for high-voltage and high-power applications.

Open-Loop Stepper Motor Modeling &Controlling

This project implements a system for modeling and controlling a stepper motor. With the arrival of industrial automation as well as microprocessor applications, the attention within digital motion-based control systems is also extended. Hybrid stepper motors are extensively used in the applications of an open-loop position.

This proposed system implements an outline of a hybrid stepping motor. The drive strategies of this motor are presented like backstepping and full stepping. The characterization of system methods is described & response characteristics results of experimental and simulated results are evaluated to check the model. This project demonstrates that a stepping motor with an open-loop will be the right simulation to calculate the performance of the real hardware.

Top 10 IEEE Based Mtech Projects

Here is a list of top 10 Mtech projects in electronics, based on IEEE standards. Unlike the B.Tech projects that need not be real-time or research-based projects, Mtech projects based on electronics and communication are completely real-time based and are mostly implemented in any organization or industry. The following is a list of all the projects along with a brief idea about each one.

MOSFET Embedded Sensor for MEMs Application

This is one of the latest Mtech projects involving MEMs fabrication . This project involves designing a MOSFET-based sensor, which is based on the fact that drain to source current of the device changes with the application of stress. The integration of CMOS electronics with the MEMs sensors facilitates the development of a low cost, accurate, and high sensitive signal conditioning circuit.

Design of a Wireless Body Area Network

This project is proposed to design a wireless monitoring system wherein the body parameters in the form of raw data, from different patients are multiplexed and transmitted to the monitoring station, where they are analyzed and processed using software like MATLAB. The project also involves the use of biomedical sensors and RF module for wireless communication.

Design of a Fingerprint System Using Capacitive MEMs Touch Sensor

This project is proposed to design a fingerprint sensor by designing, simulating, and fabricating a capacitive array of sensors using MEMs fabrication techniques . This system involves the detection of ridges and valleys on the silicon layer using the sensors.

Mobile Sensor Navigation System

This is one of the embedded projects used in applications like Robotics, surveillance, wildlife monitoring, where there is a requirement to track mobile targets. The Mobile sensor navigation system uses a semidefinite programming technique that involves the estimation of the location of the target based on the TOA measurement model. This model takes into account the presence of noise in sensor data.

Vehicle Collision Avoidance System

This project proposes the use of a neural network architecture involving dynamic functioning, which is based on fuzzy sets, to develop an anti-collision prediction system. This system is basically proposed to reduce the number of road accidents due to the collision.

RF Radiation Package

This project is designed to develop an RF radiation system with highly strict packaging issues and a high pulse repetition rate. It is designed to achieve field strength up to 4700KV/m.

The RF radiation package involves batteries, a power supply unit, a Marx generator unit, and antennas directly incorporated as output to the Marx unit. This system can also be used in other electronics and communication projects .

Energy-Optimized Driving System with Autonomous Vehicle

This project is designed to develop an energy-optimized driving system based on information from the traffic signals. It involves the development of a wireless communication system between the vehicles and the traffic control unit.

The system also involves the use of sensors to detect the surrounding environment and to get the local traffic information. Based on the sensor’s inputs, a Metaheuristic approach to develop an optimized driving system is proposed.

360 Degrees of Robotic Rotation

This project is proposed to develop a complete automatic Robot that can not only sense the objects in its path, but also can pick up the objects and place them at other locations, or change its course of direction like a pick and place robot . This system targets to achieve a 360-degree rotation of the robot wherein the robot can rotate in all directions on its own. This is also one of the popular types of embedded projects.

Android-Based Wireless Thermal Printing System

This project is designed to develop a wireless thermal printing system using Bluetooth technology. It involves the wireless transmission of the data from an Android-based application to the controller by using the Bluetooth technique and then printing the data using a thermal printer.

Biometric System Based on Iris Recognition

This project is proposed to design a biometric system that involves human identification based on their iris structure. This biometric system uses a high-resolution imaging technique with the IR illumination method to get images of the iris, and then processes the images using digital technology to obtain the details of an individual. It is more stable and gives better performance.

Iris Movement Based Wheelchair Control using Raspberry Pi – A Start of Art

Being disabled makes people be dependent on others to do their day to day work. Aiming to help such people, so that they can do the task independently, many methods and projects are being proposed. Paralysis is the medical condition that also leaves people disabled. One of such paralysis is Quadriplegia. In this, the whole body gets paralyzed except eyes.

This project is proposed to help such people suffering from Quadriplegia. Here, the movement of their wheelchair is controlled by their eye movements. To implement this idea IR camera module is used and image processing is done using OpenCV. Raspberry Pi programmed with python is used to control the system.

Smart Harvest Analysis using Raspberry Pi based on the Internet of Things

Agriculture is the basic source of income in many countries. With the growing greenhouse effect and pollution, our weather cycle is changing randomly and climatic conditions are becoming difficult to predict. This change in weather conditions highly affects the growth of the crop. In this project, a machine learning algorithm is used to predict the right crop to be grown depending upon the collected topological data, soil, and weather conditions.

Aiming to help farmers to get high yield, this system( SHARP) can monitor the crop for water level management, automatic irrigation, and manual/automatic control of motors . Raspberry Pi is used to collect the data, send it over the server, and update the database. This data is used for prediction and can be viewed on the mobile phone.

Hazard Reconnaissance Rover using Raspberry Pi and Multiple Sensors

The most challenging work for rescue teams during natural or manmade calamities is to find people among the debris. During such a situation, there are also some dangerous and confined spaces where the rescue team cant reach. this project is designed to be helpful in such hazardous situations. Designed using Raspberry Pi this four-wheeled Rover has a compact body with multiple sensors such as Temperature sensor , Humidity sensor, Gas detector, and a Night vision camera.

 Real-time Robotic Car Control using Brainwaves and Head Movements

In this project, the robotic car is controlled using head movement and blinking of eyes. Emotiv Epoc Headset is used to obtain the gyro and EEG signals. These signals are used to determine the direction of the robotic car.

Threshold values are decided using the maximum and minimum amplitude values of the gyro signal and ratio of beta waves and alpha waves. Arduino UNO is used for the implementation of this project due to its low cost and programming flexibility. Thus, in this project, the real-time control of the robotic car is done using head movements.

 Monitoring System for Solar Panel using Smartphone-based on Microcontroller

With the depletion of fossil fuels, we are moving towards the harvesting of energy through natural energy sources. Some of the natural energy resources are wind energy, solar energy, tidal wave energy, etc… Solar power harvesting can provide the best solution to meet our energy demands in the future. Many countries have already laid solar power plants to harvest solar energy.

With this, it becomes crucial to monitor the photovoltaic cells and measure the power generated by them. In this project, a real-time monitoring system is proposed that can monitor the performance of the solar panels using a smartphone. Arduino Atmega 2560 along with voltage sensor, current sensor, and temperature sensor is used to implement the system. The wifi module is used to connect the system to the smartphone. Blynk app is used to display the measurements of voltage, current, and temperature of the solar panels.

VLSI Projects for Mtech Students

Please refer to this link to know the Latest List of VLSI Projects for Electronics Engineering Students

We believe that the efforts we put in to bring forth the above mentioned robust and advanced Mtech projects would be of immense help for those students and readers who are keenly interested in doing projects in myriad areas like Robotics, MEMs, Android OS , Embedded Systems, and so on.

Thus, this is all about the list of Mtech projects for ECE and EEE students. Furthermore, we have been providing articles on a regular basis for all our readers and followers, particularly for those who are in search of Mtech projects and engineering projects. Therefore, we encourage our readers and followers to mention their project requirements and choices pertaining to the projects, along with their feedback in the comment section given below.

Photo Credits:

• Collision Avoidance System by nhtsa
• Android Based Wireless Thermal Printing System by ytimg

Share This Post:

• Top Colleges
• Top Courses
• Entrance Exams
• Admission 2024
• Study Abroad
• Study in Canada
• Study in UK
• Study in USA
• Study in Australia
• Study in Germany
• IELTS Material
• Scholarships
• Sarkari Exam
• Visual Stories
• College Compare
• Write a review
• Login/ Register
• Login / Register

M.Tech ECE Syllabus and Subjects

The MTech ECE syllabus focuses on studying various electronic systems and communication technology related-subjects . M.Tech Electronics and Communication Engineering course is highly industry-oriented and enables students to design and supervise the production of broadcast and communication systems .

The M Tech ECE syllabus encompasses research, design, development, and testing of electronic equipment utilized in diverse systems . Some common MTech ECE subjects are Advanced Communication Engineering, Digital Circuits & Systems, Satellite Communication Systems, Semiconductor Devices & Modelling , etc.

Table of Contents 

• First Year M.Tech in Electronics and Communication Engineering Syllabus
• Second Year M.Tech in Electronics and Communication Engineering Syllabus
• M.Tech Electronics and Communication Engineering Subjects
• College Wise M Tech Electronics and Communication Engineering Syllabus

Semester Wise M Tech Electronics and Communication Engineering Syllabus

M Tech Electronics and Communication Engineering syllabus introduce aspirants to a broad range of concepts related to electronics and communication engineering through laboratory classes and industrial training . The semester-wise breakdown of the MTech syllabus for ECE is as given below: 

First Year M Tech Electronics and Communication Engineering Syllabus

In the first year, students are introduced to core MTech subjects for ECE. The subjects in the 1st Year MTech ECE syllabus are given below:

Practical Topics in 1st Year M Tech in Electronics and Communication Engineering Subjects

The M.Tech in Electronics and Communication Engineering syllabus includes both theoretical and practical lab sessions for a better understanding of core concepts. Some of the practical topics in the 1st year MTech in Electronics and Communication Engineering syllabus are given below:

• HDL code to realize all the logic gates
• Design of Finite State Machine
• Implement the advanced digital modulation techniques
• Implementation of Convolutional Encoder and Decode

Second Year  M Tech Electronics and Communication Engineering Syllabus

Students are introduced to specific subjects based on their electives in the second-year MTech subjects for ECE. The subjects in the 2nd Year M Tech ECE syllabus are given below:

Practical Topics in 2nd Year M.Tech in Electronics and Communication Engineering Subjects

Some of the practical topics in the 2nd year M.Tech in Electronics and Communication Engineering syllabus are given below:

• ECG signal compression
• Design of the FSK system
• Measurement of the effect of Inter Symbol Interference
• Verification of Autocorrelation Theorem

MTech ECE Subjects

The MTech subjects for ECE emphasize in-depth learning of concepts related to topics like Electronics and computers, Networks, System Integration, Communication Technology, Software Engineering, Distributed, and Embedded Systems, and Digital Electronics and Communication . The MTech ECE subjects are as follows:

• Core Subjects

M Tech ECE syllabus consists of both core and elective subjects. Some of the core subjects under the MTech ECE syllabus are given below:

• Advanced Communication Engineering
• Digital Circuits & Systems
• Electronics System Design 
• Satellite Communication System
• Digital Signal Processing
• Information Theory and Coding 
• Semiconductor Devices and Modelling
• Microwave & Optical Communication
• Elective Subjects

Some of the elective subjects under the M Tech ECE syllabus are given below:

• Design of Fault-Tolerant Systems
• Laser Science & Technology
• System on Chip Architecture 
• Ad-hoc & Wireless Sensor Networks
• VLSI Technology and Design
• Electromagnetic Metamaterials
• Adaptive Signal Processing
• Remote Sensing and Navigational Systems
• Wireless MIMO Communications 
• Electromagnetic Interference & Compatibility
• Parallel Processing
• Embedded Real-Time Operating Systems
• Pattern Recognition and Machine Learning 

M.Tech ECE Subjects in Detail

The subjects in M.Tech ECE are designed to teach students concepts of electronic circuits, computer systems, microprocessors, analog & digital Communication, Satellite Communication, etc . A detailed view of some of the subjects in the M.Tech ECE syllabus is given below:

College Wise M.Tech Electronics and Communication Engineering Course Syllabus

The M Tech Syllabus for ECE spans multiple semesters and provides comprehensive knowledge in advanced electronics and communication systems. The M Tech Syllabus for ECE covers topics such as advanced microprocessors, wireless communication,and more. The college-wise M.Tech Electronics and Communications Engineering syllabus is detailed in the sections below.

MD University, Rohtak M.Tech Electronics and Communication Engineering Syllabus

MD University's MTech syllabus ECE includes subjects like wireless mobile communication, satellite communication, advanced digital signal processing, neural networks, fuzzy logic, and CDMA, leading to the final dissertation. The MDU MTech syllabus ECE is detailed in the table below: 

Jamia Millia Islamia M.Tech Electronics and Communications Engineering Syllabus

Jamia Millia Islamia's M.Tech ECE syllabus focuses on stochastic processes, VLSI design, telecommunication switching, etc. Elective Mtech ECE subjects include digital image processing, information theory, or advanced computer networks. An overview of the detailed semester-wise syllabus is detailed below:

M.Tech Electronics and Communication Engineering Course Structure

The MTech courses for ECE are composed of 4 semesters. Practical lab sessions, certification courses, and industry exposure enhance the understanding of academic outcomes. The general course structure is as follows:

• IV Semesters
• Practical Workshops
• Project/ Thesis Submission

M.Tech Electronics and Communication Engineering Teaching Methodology and Techniques

M.Tech ECE takes into account diverse teaching methods and is designed to offer expert training to students in a pragmatic way through traditional lectures, workshops, seminars, guest lectures, and practical training . Listed below are the training strategies in general:

• Group Projects
• Conceptualized Learning
• Traditional Classroom Based Teaching
• Extension Activities
• Talks from guest speakers

M.Tech Electronics and Communication Engineering Projects

The projects under the MTech ECE syllabus are given to students to understand the real-time work environment along with obtaining hands-on experience and training in industrial work. These projects enhance the creativity of students which is required to be submitted at the end of the fourth semester . Some popular topics under the MTech Electronics syllabus are given below:

• Enhancement of Transportation Safety for School Children Using RFID
• Implementation of Mobile Technology for Atomization of Vehicle Parking System
• Design of ATM Terminal using Fingerprint Recognition
• Fingerprint Recognition-based PC Login System
• ARTS – Advanced Rural Transportation Systems

M.Tech Electronics and Communication Engineering Reference Books

Reference books under MTech Electronics and Communication syllabus are available both online and offline in many publications. Students must invest in reference books for better learning and a clear understanding of subjects. Some of the best books for M.Tech ECE are given below:

Top M.Tech Electronics and Communication Engineering Colleges

Chennai,Tamil Nadu

Jamia Millia Islamia (JMI)

Delhi,Delhi NCR

SOA University

Bhubaneswar,Odisha

NIT Rourkela

Rourkela,Odisha

IIEST Shibpur - Indian Institute of Engineering Science and Technology

Howrah,West Bengal

Saveetha University

IIT Bhubaneswar

Top Engineering Entrance Exams

Result Date: Apr 25, 2024

• Eligibility Criteria

Exam Date: May 26, 2024

M.Tech Electronics and Communication Engineering Fee Structure

What is the 1st year syllabus of M.Tech ECE?

The 1st year syllabus includes subjects like Digital Communication Systems, Wireless Networks, Optical Communication Systems, etc.

What are the core subjects in M Tech ECE?

The core subjects of M Tech ECE are Digital Circuits & Systems, Satellite Communication Systems, Semiconductor Devices and Modelling, etc.

What are the M Tech ECE projects?

Some common M Tech ECE project topics are Fingerprint Recognition-based PC Login Systems. ARTS – Advanced Rural Transportation Systems, etc.

What are the important books for M Tech ECE?

A few popular reference books include Electronic Devices and Circuits by Robert L. Boylestad, Embedded System Design by Steve Heath, etc.

What is the M Tech ECE course structure?

The M Tech ECE curriculum includes lectures, projects, internships, electives, and core subjects. The course spans 2 years and is divided into 4 semesters.

Get Free Scholarship worth 25000 INR

Home > ETD > DEP_ECE > ETDB_ECE

Electronics And Communications Engineering Bachelor's Theses

Theses/dissertations from 2023 2023.

Portable semi-autonomous robot for agricultural insect pest recognition and elimination , John Dominic B. Aguila, Gian Kendrick T. Go, Carl Nixon D. Ong, Marc Lance J. Orsos, and Bryan Kenneth Q. Que-Unsu

Developing an automated IoT-based indoor farming system with optimal LED light quality control for leafy vegetable growth , Andre' Mitchelle L. Bamba, Elmark Joseph L. Corpus, Martin Adrian C. Enghoy, and Hanna Camille B. Gabay

LoRa on the bus: Time and location monitoring system for P2P buses , John Herald Angeles Bañez, Polo Gi Magtibay Dimayuga, Dominic Andrei Gawat Limpengco, and Lorenzo Miguel Ricafranca Pepino

PnP-MEDER: A plug-and-play P2P modular DC microgrid solution for rural areas , Angelo S. Casimiro, Lois Raniel D. Closa, Juan Miguel A. Sanchez, and Pierre Randell S. Yao

Development of an automated microcontroller-based in-vessel composting system for the household setting , Malcolm Andersen H. Co, Jan Ralph U. Go, Francis John N. Magallanes, and John Matthew B. Vong

Machine learning-based identification and classification of pulmonary nodules , Theodore Benito Cham Coteok II, Lenard Ryan Santos Llarenas, Joseph Villa Portugal, and Matthew Edward Segismundo Toro

Development of a cloud-based robotic arm platform in electrical circuit laboratory for Labvolt Equipment , Athena Bianca P. Dionido, Erika Kimberly H. Go, Matthew H. Gonzales, Jahmil Gabriel P. Reyes, and Errol John S. Velasco

A network-based solution and knowledge-building portal for monitoring goat feeding behavior pattern and agricultural technology information sharing , Anton Luis C. Garces, Gianne Marcus V. Obusan, Julianne Abbe R. Ong, and Samuel C. Perez

Intelligent flock of surface vehicles for collecting solid waste in bodies of water , Carl Heinrich I. Ong, Enrico Sebastian C. Salazar, Pierre Marie R. Salvador, and Oliver Scott Y. Te

Theses/Dissertations from 2022 2022

A remote monitoring system for pico-hydroelectric system , Darlene Alyssa P. Abaluna

Detection of harmful gasses in improvised explosive device using android technology: A prototype , Adrian William S. Alano, Arl Marion Josef Lintag Divino, and David Manasseh Crisostomo Soliman

Joystick controlled autonomous robotic arm using inverse kinematics with object detection , Edmark Jayson Q. Aldea, Roger Jayson M. Mendez III, Macario N. Peralta V, and Lia Sophia Y. San Miguel

Universal robust vehicle identification system , Lorenz Joshua Sebastian Alfonso, Tiffany Joy Ferrer Benitez, Cseanne Jaycons Original Cabalquinto, Francis Jerome Tabieros Perez, and Janet Yang

Human presence detection based on gathered thermal datasets through deep learning , Miguel Carlos Cariño Amoroso, Kenneth Roel Catapang Atienza, Riff Kurtees Tan Ladera, and Nico Angelo Mendoza Menodiado

Real-time spectrophotometric determination of coffee roast degree , Jerome Moises L. Andres, Angelo C. Araño, Don Levi Andre V. Diwara, and Cedric Paul M. Sazon

Solid waste identification and segregation hub (S.W.I.S.H.) , Ryan Jasper V. Ang, Justin James N. Hizon, and Kyle Daniel P. Pimentel

Development of a home healthcare system for a person under monitoring with remote access through web application , Jan Luis V. Antoc, Teofilo M. Contreras Jr., Michael Ryan B. Panes, and Emerson Karl M. Tiu

Drone team manipulation using hand gestures for object transportation , Reginald Geoffrey Lausa Bayeta IV, Kyle Jomar Casabuena Megino, Angelo Jose Teodorico Diaz Parco, and Anjelo Louise Gerardo Vicente

Development and implementation of a game theory based ride-sharing technique , Gabriel Antonio M. Borja, Gerard Ryan C. Ching, Francis Miguel M. Espiritu, and Kerwin D. Go

Design and implementation of LoRaWAN autonomous base station as a communication network for rural areas , John Benedict M. Carbonel, Angelo Crom S. Pestaño, Gilbert M. Roque Jr., Migio Antonio C. Tan II, and Raphaele Timothy A. Villarubin

Advance scorecard for boxing: Combat sport analysis with deep learning , Phillip Christian C. Cardino, Jamie Lynn T. Chua, and John Rossi Rafael R. Llaga

Designing a semi-autonomous medicine dispensing mobile robot using IoT with obstacle detection capabilities , Maria Victoria Tuazon Ching, Margaret Justo Dionisio, Stephen Gabriel Fernandez Garbo, Jann Carlo Nano Red, and Vince Macanas Salloman

Dagas: A mobile and web-based disaster relief goods management system , Kenley Lewis Ting Chiu, Jet Orville Que Chua, Emil John David Lopez, and Josef Lyle Huan Solis

PCB fault detection through the use of convolutional neural networks , Aivan Jarell P. Chua and Daniel Edric Y. Ong

Emotion-based music player using facial recognition , Adrian Richton D. Co, Nathan Jonah D. Delgado, and Jose V. Medalla III

E-balloon: A propellerless flight control system , Patrick Ross S. Coronel, Rafael Antonio S. Duenas, Efi Mikhael B. Gabriel, and Kyle Austin B. Hartigan-Go

Development of mobile-based point of sales android application for food and drink stalls , Trisha Angeline M. DeVera

Automated IoT enabled vertical farming: Planting atypical crops in an urban environment , Floyd Robert Cocabo Dim and Daniel Lester Costes Guillermo

Breast cancer screening application using thermographic images and machine learning analysis , Rency Christelle O. Evidente, Vincent Rafael T. Sayoc, Jason Patrick T. Uy, and Leila Yasmin C. Young

MRT trains mobility tracking using LoRa network , Samuel Alexander A. Pasia, Vince Matthew A. Rivera, Jereme Adriane D.G. Sy, and Bianca Clarisse Y. Tan

WiFi-based indoor positioning system in a multilevel building , Joshua Kenichi Y. Sim, Rica Rizabel M. Tagabuhin, and Jan Jayson S.D. Tirados

Theses/Dissertations from 2021 2021

Real time visual traffic map for vehicle density estimation using IP-CCTV networks , John Carl B. Bautista, Adrian Giuseppe Francis M. Fernan, Zendrel G. Gacuya, and Eldrine Jay Perez

Simulation of centroid control for payload transport using cooperative unmanned aerial vehicle team on a virtual environment , Lourdes Racielle B. Bulda, Matthew Zandrick G. Marasigan, Isabel F. Navarro, and Victor Antonio R. Valdes

Smart medicine dispenser with online dispensing capabilities , John Joseph M. Castillo

Implementation of field oriented control on brushless DC motors for UAV application , Jonathan U. Lao and Paulo Enrique D. Martin

LoRa rescue: Emergency distress signal geolocation system , Gregory James G. Pe, Robert Ianny Roi F. Quijano, and Benjamin Emmanuel C. Uy

Advanced Search

• Notify me via email or RSS
• Collections
• Disciplines
• Colleges and Units

Submissions

• Submission Consent Form
• Animo Repository Policies
• Submit Research
• Animo Repository Guide
• AnimoSearch
• DLSU Libraries
• DLSU Website

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

MTech | B.Tech | Ph.D Project Topics in Electrical Engineering for 2024

Embark on a journey of innovation and technological prowess with our curated collection of MTech | B.Tech | Ph.D project topics in Electrical Engineering for the year 2024. Each project is meticulously crafted, exploring cutting-edge advancements and challenges in the realm of electrical engineering. Aligned with trending IEEE standards, our selection encompasses a diverse range of project titles, each accompanied by a relevant base paper and a concise abstract.

Dive into the forefront of transformative research as you explore project topics that address contemporary issues and contribute to the ever-evolving field of electrical engineering. Whether you are a passionate student, dedicated researcher, or industry professional, our collection offers a gateway to the latest trends and breakthroughs.

These MTech | B.Tech | Ph.D projects delve into areas such as power systems , renewable energy, signal processing, and more. The titles are strategically chosen to incorporate keywords that resonate with the current trends in electrical engineering, ensuring relevance and alignment with the dynamic technological landscape.

Table of Contents

 Machine Learning Based Power System MTech | B.Tech | Ph.D Project Topics 2024

Chat With Expert

Explore more Machine Learning Topics

Embedded Systems In EEE MTech | B.Tech | Ph.D Project Topics 2024

Explore more Embedded Systems topics

Communication In EEE MTech | B.Tech | Ph.D Project Topics 2024

Explore more Communication EEE topics

Optimization Based EEE MTech | B.Tech | Ph.D Project Topics 2024

Explore more Optimization EEE topics

Matlab Simulink MTech | B.Tech | Ph.D Project Topics 2024

Explore more Matlab Simulink topics

Himanshu Garg

Experienced Engineering Mentor and Educator | Empowering Students to Excel. With a passion for guiding and empowering engineering students, I am dedicated to supporting their academic journey and fostering their success. With a strong background in Process Control (instrumentation), I completed my Mtech in 2020. Passionate about helping students excel, aims to introduce new modules addressing mental stress problems and other crucial areas in Engineer's Planet. Connect with me to explore opportunities for collaboration and support in engineering education.

Matlab Simulink Project Topics With Abstracts and Base Papers 2024

Transportation engineering project topics with abstracts and base papers 2024, you may also like, smart india hackathon projects ideas, how do electric cars work the science behind:..., how do mcbs work the engineering behind it, nikola tesla’s radio controlled boats: the science behind..., intensity analysis (build your own model using nlp..., fire detection model using deep learning, exploring transformative b.tech project topics in electrical engineering..., beyond the numbers: conquering percentage requirements for engineering..., effective note-taking strategies for engineers, top 10 questions with answers for engineering interview..., leave a reply cancel reply.

This site uses Akismet to reduce spam. Learn how your comment data is processed .

• Mentorship Sessions
• M.Tech Projects R&D
• Ph.D Projects R&D
• B.Tech Projects R&D
• Plagiarism Report
• Bootcamp Hot

IMPORTANT LINKS

• Announcements New
• Project Downloads
• Career / Internship
• Privacy Policy
• Terms & Conditions
• MTech Projects Hot
• PhD Projects New
• BTech Projects
• AMIE Projects
• DBMS Projects Hot
• ECE & EEE Projects
• Research Paper
• Thesis Report

Fabrum Planet Solutions Pvt. Ltd.

• [email protected]
• +91 8882479344
• Delhi | Mumbai | Kolkata | Chennai

© 2024 All Rights Reserved Engineer’s Planet

Digital Media Partner #magdigit 

• Terms & Conditions

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. OK Read More

• Study Abroad Get upto 50% discount on Visa Fees
• Top Universities & Colleges
• Abroad Exams
• Top Courses
• Read College Reviews
• Admission Alerts 2024
• Education Loan
• Institute (Counselling, Coaching and More)
• Ask a Question
• College Predictor
• Test Series
• Practice Questions
• Course Finder
• Scholarship
• All Courses
• B.Sc (Nursing)

M. Tech Electronics and Communications Engineering: Admission Process,  Syllabus, Colleges, Jobs 2024

Collegedunia Team

Content Curator

Master of Technology [M.Tech] (Electronics and Communication Engineering) - Latest Notifications

• 27 June, 2024 : Karnataka PGCET 2024 Registration Window Reopened, Apply Now!
• 26 June, 2024 : Karnataka PGCET 2024 Exam Postponed, Know Expected date here.

M.Tech. in Electronics and Communications is a two-year postgraduate degree program for engineering students. Electronics and communication is an allied branch of engineering that deals with the research, design, manufacturing, and testing of electronic and communication devices.  The course covers key topics such as Microprocessor, Analog and digital Communication, Satellite Communication and Microwave Engineering.

The Candidate must be a graduate in B. Tech/BE from a recognized university/college/institute with at least 50% aggregate marks. Admission is M. Tech. in Electronics and Communication Engineering is based on merit and entrance exam. GATE is the primary entrance accepted by prestigious institutes. The M. Tech degree program is semester-based. Topics are covered in 4 semesters, with the last two semesters dedicated to project work for practical application or learning. The average tuition fees charged for this course range from INR 5,000 TO INR 2,00,000 for 2 years.

Table of Content

• MTech Electronics and Communication Engineering: Course Highlights
• MTech Electronics and Communications Engineering: What is it about?

2.1  Why Study?

• MTech Electronics and Communication Engineering: Admission Process

3.1  Eligibility Criteria

3.2  Entrance Exams

3.3  How to get admission in Good MTech College?

• MTech Electronics and Communications Engineering: Top Colleges
• MTech Electronics and Communication Engineering Syllabus
• Course Comparison
• MTech Electronics and Communications Engineering: Job Profiles

7.1  Future Scope

• MTech Electronics and Communication Engineering: FAQs

MTech Electronics and Communication Engineering: Course Highlights 

MTech Electronics and Communications Engineering: What is it about? 

The program equips candidates with the skill sets and specialization required in present-day digital and electronic communication. The program provides in-depth knowledge and practical exposure to candidates in areas such as Electronics and Computers, System Integration, Design, Testing,  Digital and Wireless Network Technologies, Digital and Embedded Systems, Software Systems, etc.

The M. Tech. The program also focuses on developing business acumen in engineers to provide them maximum career options once they complete the degree program.

MTech Electronics and Communications Engineering : Why study MTech Electronics and Communications Engineering? 

• Electronics and Communication engineering is considered an evergreen field since it’s covered all aspects of engineering instead of focusing on one.
• M. Tech. in Electronics and Communication will have a definite edge in the growing infrastructure and demand in digital communication.
• The candidate learns advanced networking concepts, embedded systems, hardware systems, electronic design, mobile and wireless technologies, a software system that provides them ample employment prospects in private as well as public sectors.
• With 5G technology being introduced in many countries, M. Tech. in Electronics and Communication engineering will have a much better chance than standard engineering fields. He/She can also work in IT (Information Technology)
• ECE is considered one of the best engineering fields if you wish to apply for Indian Engineering Services (IES) and work in the Government Sector.

MTech Electronics and Communication Engineering: Admission Process 

Engineering graduate candidates need to go through the selection criteria of the university/institute of their choice. The most common admission process is based on both the entrance exam and the merit of students.

• The popular entrance exams are Graduate Aptitude Test in Engineering (GATE), Post Graduate Common Entrance Test (PGCET), Orissa Joint Entrance Exam (OJEE), Uttar Pradesh State Entrance Exam(UPSEE), Birla Institute of Technical Sciences Higher Degree Exam (BITS HD), Tamil Nadu Common Entrance Test (TANCET), etc.
• Candidates need to appear in national level entrance exams (like GATE) or common entrance exams conducted by colleges.
• Entrance exams check the candidate's proficiency level in terms of Electronics and Communication concepts, Mathematics, Reasoning and logical Thinking.
• Candidates get an option to apply for their desired college/institute based on their entrance exams score.
• Based on the entrance exam score, candidates are asked to appear for personal interviews
• Finally, based on the overall performance in entrance exams and personal interviews, colleges offer admission to the selected candidates.
• Candidates can also get direct admissions in certain colleges that take students based on merit and minimum eligibility.

MTech Electronics and Communication Engineering: Eligibility Criteria 

The candidate applying for M. Tech. in Electronics and Communication must fulfill minimum eligibility criteria.

The candidates must have completed a B. Tech/BE in any engineering stream, including Agriculture/Civil/CSE/ECE/EEE, from a recognized Institute.

A minimum of 50% aggregate marks is required in the qualifying exam. (5% relaxation for reserved groups)

The candidates who are appearing for a final exam or awaiting their final exam results may also apply for M. Tech. in Electronics and Communication. (Admissions are subject to their successful completion of qualifying exam)

MTech Electronics and Communication Engineering: Entrance Exams 

Admissions to M. Tech. in ECE is primarily based on entrance exams. Various national and college-level entrance exams are held every year. Minimum eligibility is a B. Tech. Degree with minimum 50% marks in a relevant engineering field from a recognized university/institute. Here are a few important entrance exams for M. Tech. in ECE.

Read More: MTech Entrance Exams In India

MTech Electronics and Communications Engineering: How to get admission in Good MTech Electronics and Communications Engineering College? 

Below are key steps involving admission to M. Tech. in Electronics and Communication course.

• Candidates should check the placement policy for respective colleges/universities before applying.
• The Candidate needs to have a clear understanding of topics covered during B. Tech./BE qualifying exams. Most of the entrance exams check candidates' understanding of topics like communication systems, fundamentals of electronics and communication, knowledge of advanced networks and wireless systems, etc.
• The Candidate should prepare well for personal interview rounds, which has a weightage in the overall score during college admissions.
• Since the competition is very high, Candidates may appear for more than entrance exams to have multiple college options.
• The candidate should check specific eligibility requirements set aside by different exam governing bodies and follow the guidelines.

MTech Electronics and Communications Engineering: Important books to cover 

Below are some book recommendations for M.Tech ECE Course. It is recommended that the students research and look for various other books available to enhance their knowledge and expertise in their area of interest within Electronics and Communication Engineering.

MTech Electronics and Communications Engineering: Top Colleges with Fees 

What is the MTech Electronics and Communication Engineering Syllabus? 

MTech Electronics and Communication Engineering is a 2-year course which is divided into four semesters. The syllabus is different in different institutes/ colleges. Below is a semester wise syllabus for M. Tech ECE Course. Please note that course names and subject names may vary according to colleges.

MTech Electronics and Communication Engineering: Course Comparison 

Electronic and Communication engineering is often confused with Electricals and Electronics engineering; however, they are two different courses. Both of them are considered evergreen courses. Since the first-year topics are of similar nature, few colleges may allow switching between these two fields.

Below are key differences between ECE and EEE, which applicants should keep in mind.

MTech Electronics and Communications Engineering: Job Profiles 

Here are the most common job profiles and the average starting median salary per annum.

MTech Electronics and Communication Engineering: Salary Trends

MTech Electronics and Communication Engineering: Future Scope 

The candidates who have completed a degree in M. Tech. in Electronics and Communication Engineering can go for a government or private technology-based industry. There is a long list of organizations that hire experts from this field. The hiring trend is on the rise for a qualified electronics and communication engineer.

Top recruiters:

• Tech Mahindra
• LG India Pvt Limited
• Bharti Airtel
• Reliance Industries.

Check MTech Course Details

MTech Electronics and Communication Engineering: FAQs 

Ques. Is GATE compulsory for  admission to MTech ECE?

Ques. What is a good GATE score?

Ques. Which branch is best for MTech in ECE?

Ques. Can I do robotics after completing ECE?

Ques. Which is better than MBA or MTech after BTech ECE?

Ques. What is the scope of MTech in ECE?

Ques. Which IIT is best for M Tech in Electronics and communication?

Most Popular Tags

45 Reviews found

REVIEW OF NITK MTech ECE Department

Placement experience :.

After 2nd sem student gets eligible for campus placement. In last sem Samsung ,Qualcomm , analog devices, Texas instruments, AMD,Marvel,ARM , Cdot so many companies visited for the placement, highest package was arround 35 lpa which is offered by analog devices, profile was analog engineer average package is near about 15-18 lpa . Till now 50-60 % student get placed . In 2022 the placement percentage was 80-90 % due to inflation the companies deceases recruitments . That's why now our college is allowing for 11 months internship that's why in our batch almost 60% student gets the internship offer which was less at the time of our seniors so may be this year placement percentage gets increased to 80-90 % .. my plan is simple just take the placement from the campus as 60% student already gets the internship so there will be less completion so there will be more chances to get the placement

Internships Opportunities :

So for my field you will get so many opportunities. The companies visited for digital design, analog engineer, communication engineer's profiles. Companies are Samsung's, AMD, ARM MARVEL, TEXAS INSTRUMENTS, ets which offers a stipend near about 40000-60000 per month . so I did my project in digital design. In which I have implemented the verilog code in FPGA board . It was hardware implementation which is related to real life problems you can do so many many project using FPGA board for that I have used Intel qurtuz prime software which is used for verilog coding by using this software we will able to pin planning and dump the file into the FPGA board

MTech Admissions through GATE.

Campus life :.

Life is awesome here, There are various clubs like sports, music, art, Dance, etc. You can join any of these clubs and explore the potential within you, There are two large sports ground where football,cricket are played.Besides studies, you can do lots of extra activities.

Lots of companies like google , IBM , Microsoft, Texas Instrument , analog devices, Intel etc are visited in this college and also lots of psus are also visited like CDot, cdac ,oil , ongc etc. In this college lots of govt funded projects are running.

Mtech Review of ISM Dhanbad

The placement senerio of this college is normal ,but if you study above average then you will get a good job , percentage of btech is 60 and of mtech is 40 ,here highest package is around 60 lakhs and average package is around 15 lakhs , students become eligible after one year of course complition

Course Curriculum Overview :

Course curriculum is little bit easier here compared to top IIT like iisc banglore,iit Delhi,iit kanpur, IIT Bombay etc, here faculty have good knowledge of their respective subject and research area ,here exam is done with time mentioned in the academic calendar

Review of IIT ISM DHANBAD

Campus is big enough.. it's a 450 acre campus and lush green.. Library facility is one of the best in the institute it is a 7 storey building that can accommodate nearly 2000 students at a time.. it's open day and night

Many companies visited the campus this year like Intel, Texas Instruments, Tata motors, KPIT, Bajaj, analog devices, SLB and many PSU's like CDOT and CDAC they all provided salaries in the range of 9 Lakhs to 50 Lakhs

MTech admission process

Now from 2024 batch, mtech in ece have specialization, students faculty ratio depends on the class strength, as many subject have even less than 10 students and at the same time many subject have more than 80 students Faculty qualifications are mixed Term exam were timely as there is college calendar and in this everything is written and all the things are happens according, Deficulty if exam depends on the faculty

Here campus placement is good, many students convert their internship into full time and many got full time job opportunity after competition of one year of course, students become eligible for placement test and after cleared the test appear for interview and then got placement offer

Review first College Next

There is annual Techfest in celebrated every year in the month of February and it is conducted for 3 days and there are cultural programmes are also held .In University we have a digital library and central library which provides quality of books and journals which is helpful to students,The class rooms consisting of wheel chairs with current facilities lighting,fans and contain 2 boards.Yearly University conducts branch games which is so special and extra cultural activities like yoga, exercise,Nss,Ncc etc There is student union called SGC and Instagram pages like Rguktpanda,Nenu Rugukt Nayana etc.

Engeneering 4th year 1st sem students are eligible for placements The companies like Vasar labs,navitech Hugosave,vconnect Deccan chemicals Infosys Tcs Tech sakasham etc these companies recruit the students in each company the recruitment count is varied according to their requirements lopening Since1companies recruit the students in each company the recruitment count is varied according to their requirements like 2 to 20 openings The percentage of students places is 60 to 90 percentage varied every year And some of the students do Mtech and choose abroad after Btech

My Second home

Loan/ scholarship provisions :.

Students who are eligible for the scholarship will get 35000 thousand per year and NRI students and global category students need to pay college fees on their own they will not get any scholarships from the government. Many companies will come to the college to recruit students per year 60% of students will be placed.

Every year there will be a fest named Tech Fest. For every weekend there will be some programs will be conducted to encourage the student's talent. Every year college will conduct the Branch games. there will be a sports club, music club, and dance club.

A Review regarding VIIT

I have a passion for the current technology and I am willing to work on this technology for the growth and development of our country in technology aspects. The faculty in the college was okay and the teaching would be a little bit better the qualification of the faculty was MTech and Ph.D. and the teaching method is a fully digital mode which we can understand better, this is the positive thing actually. The term exams are a little bit difficult to score good marks compared to Final semester exams.

Yuva Tarang and Vista Fests are the two main fests that are simply superb and the leaving them apart some freshers and farewells also be there. This type of fest brings young talent out and it helps a lot for those who have tons of talent when it comes to sports, they are conducted twice or thrice per year and prizes will also be given to the participant. Go green campaign conducted by the students.

Good enough to get certified and get job

This course is very useful for people to complete their degree and get placed in better companies and the faculties are well talented and they have experience with qualification mtech in IITies etc. And the exams are like 3mibs+1sem for each semester.

Of course, this campus provides us with some interesting fest, etc. We will celebrate every year fests like techzite and some imp and useful etc. Books are available in libraries and students will be aware of internships etc.

A beautiful Experience at RGUKT Basar

If we are eligible for the scholarship offered by the Telangana government. Then there we can lay back and study well. The remaining process is undertaken by the university scholarship staff. There is a rich culture, and diversified campus students from various corners of Telangana are admitted into the university This encourages students to develop their interpersonal skills and technical skills too.

Anthapragnya, India's Biggest rural technical festival is an annually celebrated and student-organised event. There are various types of events, workshops, and competitions and a lot are being completely organised by the students and with the help of faculty coordinators.

All About my college

Paryukti is one of our tech fest held every year. It's a very big fest held in our college and the next day Riviera happens there we bring top singers from our college and many small tech fests done every month. Books and journals are present in the Library anyone can read there or borrow them. In our college, we organize every sports tournament such as badminton, football, cricket.. and cricket is one of the most liked sports events in our college. there are many groups like IETE, IEEE, samarpan, and many more clubs there you can join.

Fees are low compared to other wbjee colleges the hostel fee is only 12000 per semester, as well as semester fee, is also less i.e 42000. They take an extra 2000 for the exam fee every semester that's is approximately you can complete your engineering in less than 4 lakhs that's. No scholarship is present. I got placed in companies i.e Accenture, TCS (off campus), Capgemini, and mindtree.

Haldia Institute of Technology Overview

You will see many tech fests and annual cultural meets and sports events held continuously during your college time. And there is a lot of clubs and ngo which was managed by students to enhance the co-curricular activities of college and students like samarpan, Manav racing, iete, and many more. But the most famous thing is the library. I really love the library of this college its name is Aryabhatta Central library has lots of books and journals and a big room to study.

If you see the previous year's record (2022) then there is almost 100% in IT branches with an average of 5 LPA so you can say that this college is good for placement. Companies like TCS, CAPGEMINI, IBM, INFOSYS, COGNIZANT, ACCENTURE, and many more come to college to recruit freshers. And the highest package was 23 LPA and the average is around 5 LPA. When will u reach your 6th sem than companies start to come and u will get to chance to get those companies

REVIEW OF RGUKT CAMPUS

Life at the campus is excellent, extraordinary and wonderful. There are many social lives on our campus and many entertainment clubs, and the infrastructure is amazing, and it is so cool. The annual fest or the tech fest I participated in is in the round of fashion frenzy and I'm the runner-up of our university 2020 on February 23. There is a library on our campus and also a digital library on our campus. There are chairs which have wheels, each student has their own desk and with the laptop provided by our university cost of free and we have fans, AC, light and a projector as amenities in the classroom.

there are seven different types of courses ECE, CSE, MME, CIVIL, MECHANICAL, EEE, and CHEMICAL. I choose this course for a reason that is it can have both platforms in the ECE department either in electronic or in coding. 1:70 ratio of the faculty and the student B. Ed is the minimum qualification of the faculty and they can be freshers according to their experience or they can be professors and they have their teaching schedule There are two semesters each semester has three monthly tests and they are very very very difficult to pass

Rural gifted education

The infrastructure of the campus is very good and the environment is very good well constructed with the facilities available over here with all amenities of the classroom with digital equipment projectors laptops and audio system and the library is very good with the sophisticated amount of books to read and available 24 over 7 and with digital library and conducting Indias biggest rural technical festival antahpragnya and many more events sports and other extracurricular activities.

It is 6-year integrated BTech course with pre-University courses and a 4-year btech course and the branch is allocated based on merit and reservation and the faculty in the branch is very good and sound knowledge and they are post-graduated from various universities and iits, nit s and research Ph.D. candidates the exams are moderated to pass not easy not too hard the standard need to improve.

IIIT Banglore Experience

IIIT Banglore is well-known for its placement opportunities. The college not only has high educational standards but also offers competitive placement packages. Every year, the college retains a 100% placement record, with the highest selection package reaching up to 46 LPA and the median wage package being around 19 LPA, which are very good packages in contrast to many engineering colleges of such stature. Members of the college placement panel are also highly professional and have extensive industrial experience.

The college is located on approximately 10 acres of land. Although the college is small, the infrastructure is well maintained, and the college is kept clean and tidy. The college classrooms are well-ventilated and equipped with air conditioning and a digital board. Many informative books by best-selling writers from all over the world can be found in the college library. The college labs are modern and well-maintained. A basketball court, badminton court, and volleyball court are also available at the college.

Heritage Institute Of Technology- Best Engineering College To Look For

Heritage Utsav is the name of the annual fest and tech fest and is conducted in March every year. The library is filled with an ample amount of books and journals. The classrooms are fully air-conditioned. In a year there are many sports and extracurricular activities that happen on our campus like football, cricket tournaments, music, and dance competitions. Also, there are social clubs like music clubs, dance clubs, and sports club

I have always wanted to opt for higher studies and want to pursue my Ph.D. degree. And therefore I took this course. The faculty-student ratio is 3:1. The faculties are friendly and are always available to help you out by providing solutions to any kind of problem. All faculties are highly qualified with a minimum master's degree in technology. There are three exams in a semester. two internals and end semester exam.

IIIT Banglore Review

The curriculum is totally based on the current industrial requirements and follows all the latest regulations. The curriculum completely focuses on all concepts of engineering and electronics components and structure and dynamics. The faculty ratio was around 1:10 and the faculty interaction in the class is very healthy. The faculty have completed their PhD degree and have very good experiences in the field of teaching and they are totally aware of teaching methods. The faculty teaching methods is the blend of traditional and modern teaching statistics.

The biggest plus of our college is that the college follows a no-ragging policy strictly. The college infra is properly managed and maintained. The classrooms are very good and properly ventilated and fully equipped with a digital board, AC and a computer system. The college also provides sports facilities like a basketball court, badminton and volleyball court. The college library is small but full of knowledgeable books we can find books of every domain and many latest international journals are also available.

The curriculum is up to date and all the latest techniques and tricks are taught us through the curriculum of the program. The curriculum gives us an opportunity to explore our innovative skills and help us to develop our decision making and problem-solving skills. The faculty of the college is not only of PhD level but they are very professional and have very good research and industrial experience that is very beneficial for us. Their teaching methods are a mixture of theoretical and practical methods and they also train us through simulative exercises to keep us aware of the problem-solving technique.

IIIT Banglore is very popular for its placement offers. The college is not only high on education standards but the placement packages of the college are also on the higher side. The college maintains a 100% placement record every year and the highest placement package reaches up to 46 LPA and the average salary p[acakge is around 19 LPA which very good packages offer in comparison to many engineering collge of such stature. The college placement committee members are also very professional and have very good industrial experiences.

A GOOD COLLEGE FOR MASTERS IN VLSI DOMAIN

I think M.Tech in the Electronics field is a good option. It has huge research and application potential. The faculty-student ratio is good almost 10:1. The faculties all are PhD from IITs. They are well experienced. There is two-semester in a year. There is One Midterm and one end-term exam in a semester. All question papers are prepared from the topics covered. The weekly quizzes are tough. Other exams are moderate to pass.

ABHIKALPAN is the TECH fest, GUSTO is the sports fest, TARANG is the cultural fest. All classrooms are well equipped with Smart class facilities, air-conditioned and well designed. There are good facilities for indoor and outdoor games. SPIC MCAY, Sanskrit club, poetry club etc are very popular on the campus.

Awesome Faculty Department

Recently Wipro has done an internship with a stipend of 20000 per month for every candidate. The candidates have successfully finished their internship program with flying colors. viz a viz computer software developer, computer courses like CCNA, CCNP, and many more.The candidates highly appreciated the program and the role of sviet experts in organizing the internship program.

If I talk about btech final semester is the time to get placed in any govt or private companies There are various companies that are visiting in SVIET like infosis, Mahindra, Tata Motors, blue origins, Samsung, etc 15-16 lakh per year 50-70% I want to teach in any college as a lecturer of electronics and communication engineering

Master of Technology [M.Tech] (Electronics and Communication Engineering) : 40 answered questions

Ques. which is best to pursue an mtech in ece: iit bombay or iisc bangalore.

● Top Answer By Advait Joshi on 14 Jul 23

Ques. Which is the best in microelectronics IISc Bangalore or IIT Bombay?

● Top Answer By Amruta Bhatt on 18 Mar 23

Ques. What is the placement scenario of ECE M.Tech at IIT Roorkee?

● Top Answer By Rajashree Mukharjee on 12 Apr 23

Ques. How was your interview experience at IIIT Hyderabad for MS ECE?

● Top Answer By Aishwarya Shastri on 02 Aug 23

Ques. How is NIT Goa for Mtech in vlsi?

● Top Answer By Shaoni Kilaram on 24 Aug 21

Ques. Is electronics and design technology for NIT Calicut worthy? How are the core placements for this branch?

● Top Answer By Megha Deb on 23 Mar 21

Ques. How is the M.Tech course for Embedded Control and Software in IIT Kharagpur?

● Top Answer By Aman Sharma on 23 Mar 23

Ques. What is the current placement scenario for an MTech in the VLSI branch at NIT Surathkal and what is the minimum package?

● Top Answer By Tripti Guha on 04 Aug 22

Ques. How is the VLSI placement in NIT Calicut?

● Top Answer By Purvi Singhal on 22 Apr 21

Ques. How is MTech in VLSI in ABV-IIITM, Gwalior regarding its placement and faculty? How much stipend do they provide to an MTech student?

● Top Answer By Tanya Jain on 15 Sept 20

Master of Technology [M.Tech] (Computer Science and Engineering)

Master of technology [m.tech] (structural engineering), master of engineering [me] (computer science and engineering), master of technology [m.tech] (mechanical engineering), master of technology [m.tech] (thermal engineering), master of technology [m.tech] (electronics and communication engineering) colleges in india.

Amity University

Jamia Millia Islamia University-[JMI]

Guru Gobind Singh Indraprastha University - [GGSIPU]

IIT BHU - Indian Institute of Technology

ISM Dhanbad - Indian Institute of Technology - [IITISM]

IIT Bhubaneswar - Indian Institute of Technology - [IITBBS]

National Institute of Technology - [NITK]

Subscribe to our news letter.

• Integrated M.Tech.
• Master of Science by Research
• PG Programme in Digital Product Design and Management
• M.Sc. (Digital Society)
• Fellowships
• B.Tech. & Integrated M.Tech.
• Ph.D. & Master of Science by Research
• Post Graduate Programme
• Computer Science
• Data Sciences
• Software Engineering
• Mathematics and Basic Sciences
• Networking, Communication and Signal Processing
• VLSI Systems
• Digital Society
• Exchange Program
• Verification Process
• Programme Outcomes
• Academic Calendar
• Online Education
• Executive Programmes
• Certificate Programmes
• Executive Post Graduate Certificate Programmes
• E-Health Research Centre (EHRC)
• Machine Intelligence & Robotics CoE (MINRO)
• Centre for IT & Public Policy (CITAPP)
• Cognitive Computing CoE (CCC)
• Centre for Accessibility in the Global South (CAGS)
• COMET Tech Innovation Hub (NM-ICPS)
• IIITB Innovation Centre
• Modular Open-Source Identity Platform (MOSIP)
• Surgical and Assistive Robotics Lab
• Graphics-Visualization-Computing-Lab
• Web Science Lab
• Multimodal Perception Lab
• Software Engineering Lab
• High Density Electronic Systems Lab
• Networking and Communication Lab
• Remote Sensing, GIS and Spatial Computing Lab
• Indian Knowledge System (IKS) Lab
• Smart City Lab
• Ascend Studio
• Radar Sensing Lab
• Mahabala Ganaka Labs
• Advanced Wireless Communications Lab
• Connected Devices and Wearables Lab
• IMACX Open Innovation Platform (IMACX)
• Summer Internship
• Publications
• Placement Team
• Placement Statistics
• Recruiting Companies
• Click To Recruit
• Committees & Clubs
• Students Events and Festivals
• Library Collection
• Faculty Articles
• IIITB in the Press
• Annual Reports
• Press Releases
• IIITB Innovation Center
• IIITB COMET Foundation
• IIITB MOSIP
• IIITB MINRO
• MS by Research Scholars
• Ph.D. Scholars
• Code of Conduct
• Explore IIITB
• Governing Body
• Administration
• Industry Advisory Board
• Institute Industry Interaction Cell
• Partnership
• AICTE Mandatory Disclosure
• IIITB Calendar

• M.Tech (Electronics and Communication Engineering)