to remain available.
Your contribution can help change lives.
.
Learn how to effectively conduct a critical conversation about a particular topic, or topics, that allows participation by all members of your organization. |
A local coalition forms a task force to address the rising HIV rate among teens in the community. A group of parents meets to wrestle with their feeling that their school district is shortchanging its students. A college class in human services approaches the topic of dealing with reluctant participants. Members of an environmental group attend a workshop on the effects of global warming. A politician convenes a “town hall meeting” of constituents to brainstorm ideas for the economic development of the region. A community health educator facilitates a smoking cessation support group.
All of these might be examples of group discussions, although they have different purposes, take place in different locations, and probably run in different ways. Group discussions are common in a democratic society, and, as a community builder, it’s more than likely that you have been and will continue to be involved in many of them. You also may be in a position to lead one, and that’s what this section is about. In this last section of a chapter on group facilitation, we’ll examine what it takes to lead a discussion group well, and how you can go about doing it.
The literal definition of a group discussion is obvious: a critical conversation about a particular topic, or perhaps a range of topics, conducted in a group of a size that allows participation by all members. A group of two or three generally doesn’t need a leader to have a good discussion, but once the number reaches five or six, a leader or facilitator can often be helpful. When the group numbers eight or more, a leader or facilitator, whether formal or informal, is almost always helpful in ensuring an effective discussion.
A group discussion is a type of meeting, but it differs from the formal meetings in a number of ways: It may not have a specific goal – many group discussions are just that: a group kicking around ideas on a particular topic. That may lead to a goal ultimately...but it may not. It’s less formal, and may have no time constraints, or structured order, or agenda. Its leadership is usually less directive than that of a meeting. It emphasizes process (the consideration of ideas) over product (specific tasks to be accomplished within the confines of the meeting itself. Leading a discussion group is not the same as running a meeting. It’s much closer to acting as a facilitator, but not exactly the same as that either.
An effective group discussion generally has a number of elements:
Many group discussions have no specific purpose except the exchange of ideas and opinions. Ultimately, an effective group discussion is one in which many different ideas and viewpoints are heard and considered. This allows the group to accomplish its purpose if it has one, or to establish a basis either for ongoing discussion or for further contact and collaboration among its members.
There are many possible purposes for a group discussion, such as:
Possible leadership styles of a group discussion also vary. A group leader or facilitator might be directive or non-directive; that is, she might try to control what goes on to a large extent; or she might assume that the group should be in control, and that her job is to facilitate the process. In most group discussions, leaders who are relatively non-directive make for a more broad-ranging outlay of ideas, and a more satisfying experience for participants.
Directive leaders can be necessary in some situations. If a goal must be reached in a short time period, a directive leader might help to keep the group focused. If the situation is particularly difficult, a directive leader might be needed to keep control of the discussion and make
There are two ways to look at this question: “What’s the point of group discussion?” and “Why would you, as opposed to someone else, lead a group discussion?” Let’s examine both.
As explained in the opening paragraphs of this section, group discussions are common in a democratic society. There are a number of reasons for this, some practical and some philosophical.
A group discussion:
You might choose to lead a group discussion, or you might find yourself drafted for the task. Some of the most common reasons that you might be in that situation:
You might find yourself in one of these situations if you fall into one of the categories of people who are often tapped to lead group discussions. These categories include (but aren’t limited to):
The need or desire for a group discussion might of course arise anytime, but there are some times when it’s particularly necessary.
In some cases, the opportunity to lead a group discussion can arise on the spur of the moment; in others, it’s a more formal arrangement, planned and expected. In the latter case, you may have the chance to choose a space and otherwise structure the situation. In less formal circumstances, you’ll have to make the best of existing conditions.
We’ll begin by looking at what you might consider if you have time to prepare. Then we’ll examine what it takes to make an effective discussion leader or facilitator, regardless of external circumstances.
If you have time to prepare beforehand, there are a number of things you may be able to do to make the participants more comfortable, and thus to make discussion easier.
Choose the space
If you have the luxury of choosing your space, you might look for someplace that’s comfortable and informal. Usually, that means comfortable furniture that can be moved around (so that, for instance, the group can form a circle, allowing everyone to see and hear everyone else easily). It may also mean a space away from the ordinary.
One organization often held discussions on the terrace of an old mill that had been turned into a bookstore and café. The sound of water from the mill stream rushing by put everyone at ease, and encouraged creative thought.
Provide food and drink
The ultimate comfort, and one that breaks down barriers among people, is that of eating and drinking.
Bring materials to help the discussion along
Most discussions are aided by the use of newsprint and markers to record ideas, for example.
Become familiar with the purpose and content of the discussion
If you have the opportunity, learn as much as possible about the topic under discussion. This is not meant to make you the expert, but rather to allow you to ask good questions that will help the group generate ideas.
Make sure everyone gets any necessary information, readings, or other material beforehand
If participants are asked to read something, consider questions, complete a task, or otherwise prepare for the discussion, make sure that the assignment is attended to and used. Don’t ask people to do something, and then ignore it.
Lead the discussion
Think about leadership style
The first thing you need to think about is leadership style, which we mentioned briefly earlier in the section. Are you a directive or non-directive leader? The chances are that, like most of us, you fall somewhere in between the extremes of the leader who sets the agenda and dominates the group completely, and the leader who essentially leads not at all. The point is made that many good group or meeting leaders are, in fact, facilitators, whose main concern is supporting and maintaining the process of the group’s work. This is particularly true when it comes to group discussion, where the process is, in fact, the purpose of the group’s coming together.
A good facilitator helps the group set rules for itself, makes sure that everyone participates and that no one dominates, encourages the development and expression of all ideas, including “odd” ones, and safeguards an open process, where there are no foregone conclusions and everyone’s ideas are respected. Facilitators are non-directive, and try to keep themselves out of the discussion, except to ask questions or make statements that advance it. For most group discussions, the facilitator role is probably a good ideal to strive for.
It’s important to think about what you’re most comfortable with philosophically, and how that fits what you’re comfortable with personally. If you’re committed to a non-directive style, but you tend to want to control everything in a situation, you may have to learn some new behaviors in order to act on your beliefs.
Put people at ease
Especially if most people in the group don’t know one another, it’s your job as leader to establish a comfortable atmosphere and set the tone for the discussion.
Help the group establish ground rules
The ground rules of a group discussion are the guidelines that help to keep the discussion on track, and prevent it from deteriorating into namecalling or simply argument. Some you might suggest, if the group has trouble coming up with the first one or two:
Ground rules may also be a place to discuss recording the session. Who will take notes, record important points, questions for further discussion, areas of agreement or disagreement? If the recorder is a group member, the group and/or leader should come up with a strategy that allows her to participate fully in the discussion.
Generate an agenda or goals for the session
You might present an agenda for approval, and change it as the group requires, or you and the group can create one together. There may actually be no need for one, in that the goal may simply be to discuss an issue or idea. If that’s the case, it should be agreed upon at the outset.
How active you are might depend on your leadership style, but you definitely have some responsibilities here. They include setting, or helping the group to set the discussion topic; fostering the open process; involving all participants; asking questions or offering ideas to advance the discussion; summarizing or clarifying important points, arguments, and ideas; and wrapping up the session. Let’s look at these, as well as some do’s and don’t’s for discussion group leaders.
Part of your job here is to protect “minority rights,” i.e., unpopular or unusual ideas. That doesn’t mean you have to agree with them, but that you have to make sure that they can be expressed, and that discussion of them is respectful, even in disagreement. (The exceptions are opinions or ideas that are discriminatory or downright false.) Odd ideas often turn out to be correct, and shouldn’t be stifled.
This is especially true when the group is stuck, either because two opposing ideas or factions are at an impasse, or because no one is able or willing to say anything. In these circumstances, the leader’s ability to identify points of agreement, or to ask the question that will get discussion moving again is crucial to the group’s effectiveness.
Even after you’ve wrapped up the discussion, you’re not necessarily through. If you’ve been the recorder, you might want to put the notes from the session in order, type them up, and send them to participants. The notes might also include a summary of conclusions that were reached, as well as any assignments or follow-up activities that were agreed on.
If the session was one-time, or was the last of a series, your job may now be done. If it was the beginning, however, or part of an ongoing discussion, you may have a lot to do before the next session, including contacting people to make sure they’ve done what they promised, and preparing the newsprint notes to be posted at the next session so everyone can remember the discussion.
Leading an effective group discussion takes preparation (if you have the opportunity for it), an understanding of and commitment to an open process, and a willingness to let go of your ego and biases. If you can do these things, the chances are you can become a discussion leader that can help groups achieve the results they want.
A constant question that leaders – and members – of any group have is what to do about racist, sexist, or homophobic remarks, especially in a homogeneous group where most or all of the members except the leader may agree with them. There is no clear-cut answer, although if they pass unchallenged, it may appear you condone the attitude expressed. How you challenge prejudice is the real question. The ideal here is that other members of the group do the challenging, and it may be worth waiting long enough before you jump in to see if that’s going to happen. If it doesn’t, you can essentially say, “That’s wrong, and I won’t allow that kind of talk here,” which may well put an end to the remarks, but isn’t likely to change anyone’s mind. You can express your strong disagreement or discomfort with such remarks and leave it at that, or follow up with “Let’s talk about it after the group,” which could generate some real discussion about prejudice and stereotypes, and actually change some thinking over time. Your ground rules – the issue of respecting everyone – should address this issue, and it probably won’t come up…but there are no guarantees. It won’t hurt to think beforehand about how you want to handle it.
All too often, conflict – whether conflicting opinions, conflicting world views, or conflicting personalities – is so frightening to people that they do their best to ignore it or gloss it over. That reaction not only leaves the conflict unresolved – and therefore growing, so that it will be much stronger when it surfaces later– but fails to examine the issues that it raises. If those are brought out in the open and discussed reasonably, the two sides often find that they have as much agreement as disagreement, and can resolve their differences by putting their ideas together. Even where that’s not the case, facing the conflict reasonably, and looking at the roots of the ideas on each side, can help to focus on the issue at hand and provide solutions far better than if one side or the other simply operated alone.
Sometimes individuals or factions that are trying to dominate can disrupt the process of the group. Both Sections 1 and 2 of this chapter contain some guidelines for dealing with this type of situation.
The exception here is when someone has been chosen by her community or group to represent its point of view in a multi-sector discussion. Even in that situation, the individual may find herself swayed by others’ arguments, or may have ideas of her own. She may have agreed to sponsor particular ideas that are important to her group, but she may still have her own opinions as well, especially in other areas.
If you’re asked your opinion directly, you should answer honestly. You have some choices about how you do that, however. One is to state your opinion, but make very clear that it’s an opinion, not a fact, and that other people believe differently. Another is to ask to hold your opinion until the end of the discussion, so as not to influence anyone’s thinking while it’s going on. Yet another is to give your opinion after all other members of the group have stated theirs, and then discuss the similarities and differences among all the opinions and people’s reasons for holding them. If you’re asked a direct question, you might want to answer it if it’s a question of fact and you know the answer, and if it’s relevant to the discussion. If the question is less clear-cut, you might want to throw it back to the group, and use it as a spur to discussion.
Group discussions are common in our society, and have a variety of purposes, from planning an intervention or initiative to mutual support to problem-solving to addressing an issue of local concern. An effective discussion group depends on a leader or facilitator who can guide it through an open process – the group chooses what it’s discussing, if not already determined, discusses it with no expectation of particular conclusions, encourages civil disagreement and argument, and makes sure that every member is included and no one dominates. It helps greatly if the leader comes to the task with a democratic or, especially, a collaborative style, and with an understanding of how a group functions.
A good group discussion leader has to pay attention to the process and content of the discussion as well as to the people who make up the group. She has to prepare the space and the setting to the extent possible; help the group establish ground rules that will keep it moving civilly and comfortably; provide whatever materials are necessary; familiarize herself with the topic; and make sure that any pre-discussion readings or assignments get to participants in plenty of time. Then she has to guide the discussion, being careful to promote an open process; involve everyone and let no one dominate; attend to the personal issues and needs of individual group members when they affect the group; summarize or clarify when appropriate; ask questions to keep the discussion moving, and put aside her own agenda, ego, and biases.
It’s not an easy task, but it can be extremely rewarding. An effective group discussion can lay the groundwork for action and real community change.
Online resources
Everyday-Democracy . Study Circles Resource Center. Information and publications related to study circles, participatory discussion groups meant to address community issues.
Facilitating Political Discussions from the Institute for Democracy and Higher Education at Tufts University is designed to assist experienced facilitators in training others to facilitate politically charged conversations. The materials are broken down into "modules" and facilitation trainers can use some or all of them to suit their needs.
Project on Civic Reflection provides information about leading study circles on civic reflection.
“ Suggestions for Leading Small-Group Discussions ,” prepared by Lee Haugen, Center for Teaching Excellence, Iowa State University, 1998. Tips on university teaching, but much of the information is useful in other circumstances as well.
“ Tips for Leading Discussions ,” by Felisa Tibbits, Human Rights Education Associates.
Print resources
Forsyth, D . Group Dynamics . (2006). (4th edition). Belmont, CA: Thomson Wadsworth.
Johnson, D., & Frank P. (2002). Joining Together: Group theory and group skills . (8th edition). Boston: Allyn & Bacon.
Problem-solving and decision-making in groups.
Read this section to learn about common components/characteristics of problems and the five steps in group problem-solving. This article also describes the brainstorming and discussion that should occur before group decision-making, compares and contrasts decision-making techniques, and discusses various influences on decision-making.
Group problem solving can be a confusing puzzle unless it is approached systematically.
There are several variations of similar problem-solving models based on US American scholar John Dewey's reflective thinking process. As you read through the steps in the process, think about how you can apply what we learned regarding the general and specific elements of problems. Some of the following steps are straightforward, and they are things we would logically do when faced with a problem. However, taking a deliberate and systematic approach to problem solving has been shown to benefit group functioning and performance. A deliberate approach is especially beneficial for groups that do not have an established history of working together and will only be able to meet occasionally. Although a group should attend to each step of the process, group leaders or other group members who facilitate problem solving should be cautious not to dogmatically follow each element of the process or force a group along. Such a lack of flexibility could limit group member input and negatively affect the group's cohesion and climate.
Define the problem by considering the three elements shared by every problem: the current undesirable situation, the goal or more desirable situation, and obstacles in the way. At this stage, group members share what they know about the current situation, without proposing solutions or evaluating the information. Here are some good questions to ask during this stage: What is the current difficulty? How did we come to know that the difficulty exists? Who/what is involved? Why is it meaningful/urgent/important? What have the effects been so far? What, if any, elements of the difficulty require clarification? At the end of this stage, the group should be able to compose a single sentence that summarizes the problem called a problem statement . Avoid wording in the problem statement or question that hints at potential solutions. A small group formed to investigate ethical violations of city officials could use the following problem statement: "Our state does not currently have a mechanism for citizens to report suspected ethical violations by city officials".
During this step a group should analyze the problem and the group's relationship to the problem. Whereas the first step involved exploring the "what" related to the problem, this step focuses on the "why". At this stage, group members can discuss the potential causes of the difficulty. Group members may also want to begin setting out an agenda or timeline for the group's problem-solving process, looking forward to the other steps. To fully analyze the problem, the group can discuss the five common problem variables discussed before. Here are two examples of questions that the group formed to address ethics violations might ask: Why doesn't our city have an ethics reporting mechanism? Do cities of similar size have such a mechanism? Once the problem has been analyzed, the group can pose a problem question that will guide the group as it generates possible solutions. "How can citizens report suspected ethical violations of city officials and how will such reports be processed and addressed?" As you can see, the problem question is more complex than the problem statement, since the group has moved on to more in-depth discussion of the problem during step 2.
During this step, group members generate possible solutions to the problem. Again, solutions should not be evaluated at this point, only proposed and clarified. The question should be what could we do to address this problem, not what should we do to address it. It is perfectly OK for a group member to question another person's idea by asking something like "What do you mean?" or "Could you explain your reasoning more?" Discussions at this stage may reveal a need to return to previous steps to better define or more fully analyze a problem. Since many problems are multifaceted, it is necessary for group members to generate solutions for each part of the problem separately, making sure to have multiple solutions for each part. Stopping the solution-generating process prematurely can lead to groupthink. For the problem question previously posed, the group would need to generate solutions for all three parts of the problem included in the question. Possible solutions for the first part of the problem (How can citizens report ethical violations?) may include "online reporting system, e-mail, in-person, anonymously, on-the-record," and so on. Possible solutions for the second part of the problem (How will reports be processed?) may include "daily by a newly appointed ethics officer, weekly by a nonpartisan nongovernment employee," and so on. Possible solutions for the third part of the problem (How will reports be addressed?) may include "by a newly appointed ethics commission, by the accused's supervisor, by the city manager," and so on.
During this step, solutions can be critically evaluated based on their credibility, completeness, and worth. Once the potential solutions have been narrowed based on more obvious differences in relevance and/or merit, the group should analyze each solution based on its potential effects - especially negative effects. Groups that are required to report the rationale for their decision or whose decisions may be subject to public scrutiny would be wise to make a set list of criteria for evaluating each solution. Additionally, solutions can be evaluated based on how well they fit with the group's charge and the abilities of the group. To do this, group members may ask, "Does this solution live up to the original purpose or mission of the group?" and "Can the solution actually be implemented with our current resources and connections?" and "How will this solution be supported, funded, enforced, and assessed?" Secondary tensions and substantive conflict, two concepts discussed earlier, emerge during this step of problem solving, and group members will need to employ effective critical thinking and listening skills. Decision making is part of the larger process of problem solving and it plays a prominent role in this step. While there are several fairly similar models for problem solving, there are many varied decision-making techniques that groups can use. For example, to narrow the list of proposed solutions, group members may decide by majority vote, by weighing the pros and cons, or by discussing them until a consensus is reached. There are also more complex decision-making models like the "six hats method," which we will discuss later. Once the final decision is reached, the group leader or facilitator should confirm that the group is in agreement. It may be beneficial to let the group break for a while or even to delay the final decision until a later meeting to allow people time to evaluate it outside of the group context.
Implementing the solution requires some advanced planning, and it should not be rushed unless the group is operating under strict time restraints or delay may lead to some kind of harm. Although some solutions can be implemented immediately, others may take days, months, or years. As was noted earlier, it may be beneficial for groups to poll those who will be affected by the solution as to their opinion of it or even to do a pilot test to observe the effectiveness of the solution and how people react to it. Before implementation, groups should also determine how and when they would assess the effectiveness of the solution by asking, "How will we know if the solution is working or not?" Since solution assessment will vary based on whether or not the group is disbanded, groups should also consider the following questions: If the group disbands after implementation, who will be responsible for assessing the solution? If the solution fails, will the same group reconvene or will a new group be formed?
Once a solution has been reached and the group has the "green light" to implement it, it should proceed deliberately and cautiously, making sure to consider possible consequences and address them as needed. Certain elements of the solution may need to be delegated out to various people inside and outside the group. Group members may also be assigned to implement a particular part of the solution based on their role in the decision making or because it connects to their area of expertise. Likewise, group members may be tasked with publicizing the solution or "selling" it to a particular group of stakeholders. Last, the group should consider its future. In some cases, the group will get to decide if it will stay together and continue working on other tasks or if it will disband. In other cases, outside forces determine the group's fate.
Problem Solving and Group Presentations Giving a group presentation requires that individual group members and the group as a whole solve many problems and make many decisions. Although having more people involved in a presentation increases logistical difficulties and has the potential to create more conflict, a well-prepared and well-delivered group presentation can be more engaging and effective than a typical presentation. The main problems facing a group giving a presentation are (1) dividing responsibilities, (2) coordinating schedules and time management, and (3) working out the logistics of the presentation delivery. In terms of dividing responsibilities, assigning individual work at the first meeting and then trying to fit it all together before the presentation (which is what many college students do when faced with a group project) is not the recommended method. Integrating content and visual aids created by several different people into a seamless final product takes time and effort, and the person "stuck" with this job at the end usually ends up developing some resentment toward his or her group members. While it's OK for group members to do work independently outside of group meetings, spend time working together to help set up some standards for content and formatting expectations that will help make later integration of work easier. Taking the time to complete one part of the presentation together can help set those standards for later individual work. Discuss the roles that various group members will play openly so there isn't role confusion. There could be one point person for keeping track of the group's progress and schedule, one point person for communication, one point person for content integration, one point person for visual aids, and so on. Each person shouldn't do all that work on his or her own but help focus the group's attention on his or her specific area during group meetings. Scheduling group meetings is one of the most challenging problems groups face, given people's busy lives. From the beginning, it should be clearly communicated that the group needs to spend considerable time in face-to-face meetings, and group members should know that they may have to make an occasional sacrifice to attend. Especially important is the commitment to scheduling time to rehearse the presentation. Consider creating a contract of group guidelines that includes expectations for meeting attendance to increase group members' commitment. Group presentations require members to navigate many logistics of their presentation. While it may be easier for a group to assign each member to create a five-minute segment and then transition from one person to the next, this is definitely not the most engaging method. Creating a master presentation and then assigning individual speakers creates a more fluid and dynamic presentation and allows everyone to become familiar with the content, which can help if a person doesn't show up to present and during the question-and-answer section. Once the content of the presentation is complete, figure out introductions, transitions, visual aids, and the use of time and space. In terms of introductions, figure out if one person will introduce all the speakers at the beginning, if speakers will introduce themselves at the beginning, or if introductions will occur as the presentation progresses. In terms of transitions, make sure each person has included in his or her speaking notes when presentation duties switch from one person to the next. Visual aids have the potential to cause hiccups in a group presentation if they aren't fluidly integrated. Practicing with visual aids and having one person control them may help prevent this. Know how long your presentation is and know how you're going to use the space. Presenters should know how long the whole presentation should be and how long each of their segments should be so that everyone can share the responsibility of keeping time. Also consider the size and layout of the presentation space. You don't want presenters huddled in a corner until it's their turn to speak or trapped behind furniture when their turn comes around.
Please note you do not have access to teaching notes, exploring organizational problem-solving modes: a dynamic capabilities approach.
Management Decision
ISSN : 0025-1747
Article publication date: 26 August 2021
Issue publication date: 6 January 2022
Adopting the dynamic capability perspective, this study aims at exploring which problem-solving capabilities result in fundamental solutions with a potentially low likelihood for problems to recur. This can also shed light on why, despite many attempts, process improvement programs often fail to produce such long-term solutions.
A case study is carried out to inductively describe and classify problem-solving in companies and to indicate why problem-solving efforts are typically bounded to short-term solutions. The empirical findings are triangulated with findings from the extant literature.
First, the authors propose three problem-solving modes with different characteristics and potential impacts on operational performance: intuitive problem-solving, semi-structured problem-solving and systematic problem-solving. Second, by emphasizing dynamic capabilities' micro-foundations and with the focus on learning mechanisms, the authors show that, among these modes, only systematic problem-solving can serve as a dynamic capability with fundamental solutions. Third, based on insights from the case study, the authors address behavioral and organizational impediments that curb dynamic capabilities and limit systematic problem-solving adoption.
This study is an empirically informed attempt to understand systematic problem-solving as a dynamic capability. The authors uncover the micro-foundations and the learning mechanisms through which systematic problem-solving becomes a dynamic capability. By highlighting problem-solving orientation as a hardly investigated dimension of improvement programs, the authors show that a mixture of a static problem-solving approach and a set of impediments at both individual and organizational levels is the major reason of failures of improvement programs over time.
The authors would like to thank anonymous reviewers for their thorough assessment as well as their constructive feedback to improve the work.
Mohaghegh, M. and Größler, A. (2022), "Exploring organizational problem-solving modes: a dynamic capabilities approach", Management Decision , Vol. 60 No. 1, pp. 254-277. https://doi.org/10.1108/MD-08-2020-1097
Emerald Publishing Limited
Copyright © 2021, Emerald Publishing Limited
All feedback is valuable.
Please share your general feedback
Contact Customer Support
selected template will load here
This action is not available.
\( \newcommand{\vecs}[1]{\overset { \scriptstyle \rightharpoonup} {\mathbf{#1}} } \)
\( \newcommand{\vecd}[1]{\overset{-\!-\!\rightharpoonup}{\vphantom{a}\smash {#1}}} \)
\( \newcommand{\id}{\mathrm{id}}\) \( \newcommand{\Span}{\mathrm{span}}\)
( \newcommand{\kernel}{\mathrm{null}\,}\) \( \newcommand{\range}{\mathrm{range}\,}\)
\( \newcommand{\RealPart}{\mathrm{Re}}\) \( \newcommand{\ImaginaryPart}{\mathrm{Im}}\)
\( \newcommand{\Argument}{\mathrm{Arg}}\) \( \newcommand{\norm}[1]{\| #1 \|}\)
\( \newcommand{\inner}[2]{\langle #1, #2 \rangle}\)
\( \newcommand{\Span}{\mathrm{span}}\)
\( \newcommand{\id}{\mathrm{id}}\)
\( \newcommand{\kernel}{\mathrm{null}\,}\)
\( \newcommand{\range}{\mathrm{range}\,}\)
\( \newcommand{\RealPart}{\mathrm{Re}}\)
\( \newcommand{\ImaginaryPart}{\mathrm{Im}}\)
\( \newcommand{\Argument}{\mathrm{Arg}}\)
\( \newcommand{\norm}[1]{\| #1 \|}\)
\( \newcommand{\Span}{\mathrm{span}}\) \( \newcommand{\AA}{\unicode[.8,0]{x212B}}\)
\( \newcommand{\vectorA}[1]{\vec{#1}} % arrow\)
\( \newcommand{\vectorAt}[1]{\vec{\text{#1}}} % arrow\)
\( \newcommand{\vectorB}[1]{\overset { \scriptstyle \rightharpoonup} {\mathbf{#1}} } \)
\( \newcommand{\vectorC}[1]{\textbf{#1}} \)
\( \newcommand{\vectorD}[1]{\overrightarrow{#1}} \)
\( \newcommand{\vectorDt}[1]{\overrightarrow{\text{#1}}} \)
\( \newcommand{\vectE}[1]{\overset{-\!-\!\rightharpoonup}{\vphantom{a}\smash{\mathbf {#1}}}} \)
Learning Objectives
Although the steps of problem solving and decision making that we will discuss next may seem obvious, we often don’t think to or choose not to use them. Instead, we start working on a problem and later realize we are lost and have to backtrack. I’m sure we’ve all reached a point in a project or task and had the “OK, now what?” moment. I’ve recently taken up some carpentry projects as a functional hobby, and I have developed a great respect for the importance of advanced planning. It’s frustrating to get to a crucial point in building or fixing something only to realize that you have to unscrew a support board that you already screwed in, have to drive back to the hardware store to get something that you didn’t think to get earlier, or have to completely start over. In this section, we will discuss the group problem-solving process, methods of decision making, and influences on these processes.
The problem-solving process involves thoughts, discussions, actions, and decisions that occur from the first consideration of a problematic situation to the goal. The problems that groups face are varied, but some common problems include budgeting funds, raising funds, planning events, addressing customer or citizen complaints, creating or adapting products or services to fit needs, supporting members, and raising awareness about issues or causes.
Problems of all sorts have three common components :
Discussion of these three elements of a problem helps the group tailor its problem-solving process, as each problem will vary. While these three general elements are present in each problem, the group should also address specific characteristics of the problem. Five common and important characteristics to consider are task difficulty, number of possible solutions, group member interest in problem, group member familiarity with problem, and the need for solution acceptance. Katherine Adams and Gloria G. Galanes, Communicating in Groups: Applications and Skills, 7th ed. (Boston, MA: McGraw-Hill, 2009), 222–23.
There are several variations of similar problem-solving models based on US American scholar John Dewey’s reflective thinking process. Ernest G. Bormann and Nancy C. Bormann, Effective Small Group Communication, 4th ed. (Santa Rosa, CA: Burgess CA, 1988), 112–13. As you read through the steps in the process, think about how you can apply what we learned regarding the general and specific elements of problems. Some of the following steps are straightforward, and they are things we would logically do when faced with a problem. However, taking a deliberate and systematic approach to problem solving has been shown to benefit group functioning and performance. A deliberate approach is especially beneficial for groups that do not have an established history of working together and will only be able to meet occasionally. Although a group should attend to each step of the process, group leaders or other group members who facilitate problem solving should be cautious not to dogmatically follow each element of the process or force a group along. Such a lack of flexibility could limit group member input and negatively affect the group’s cohesion and climate.
Step 1: Define the Problem
Define the problem by considering the three elements shared by every problem: the current undesirable situation, the goal or more desirable situation, and obstacles in the way. Katherine Adams and Gloria G. Galanes, Communicating in Groups: Applications and Skills, 7th ed. (Boston, MA: McGraw-Hill, 2009), 229. At this stage, group members share what they know about the current situation, without proposing solutions or evaluating the information. Here are some good questions to ask during this stage: What is the current difficulty? How did we come to know that the difficulty exists? Who/what is involved? Why is it meaningful/urgent/important? What have the effects been so far? What, if any, elements of the difficulty require clarification? At the end of this stage, the group should be able to compose a single sentence that summarizes the problem called a problem statement. Avoid wording in the problem statement or question that hints at potential solutions. A small group formed to investigate ethical violations of city officials could use the following problem statement: “Our state does not currently have a mechanism for citizens to report suspected ethical violations by city officials.”
Step 2: Analyze the Problem
During this step a group should analyze the problem and the group’s relationship to the problem. Whereas the first step involved exploring the “what” related to the problem, this step focuses on the “why.” At this stage, group members can discuss the potential causes of the difficulty. Group members may also want to begin setting out an agenda or timeline for the group’s problem-solving process, looking forward to the other steps. To fully analyze the problem, the group can discuss the five common problem variables discussed before. Here are two examples of questions that the group formed to address ethics violations might ask: Why doesn’t our city have an ethics reporting mechanism? Do cities of similar size have such a mechanism? Once the problem has been analyzed, the group can pose a problem question that will guide the group as it generates possible solutions. “How can citizens report suspected ethical violations of city officials and how will such reports be processed and addressed?” As you can see, the problem question is more complex than the problem statement, since the group has moved on to more in-depth discussion of the problem during step 2.
Step 3: Generate Possible Solutions
During this step, group members generate possible solutions to the problem. Again, solutions should not be evaluated at this point, only proposed and clarified. The question should be what could we do to address this problem, not what should we do to address it. It is perfectly OK for a group member to question another person’s idea by asking something like “What do you mean?” or “Could you explain your reasoning more?” Discussions at this stage may reveal a need to return to previous steps to better define or more fully analyze a problem. Since many problems are multifaceted, it is necessary for group members to generate solutions for each part of the problem separately, making sure to have multiple solutions for each part. Stopping the solution-generating process prematurely can lead to groupthink. For the problem question previously posed, the group would need to generate solutions for all three parts of the problem included in the question. Possible solutions for the first part of the problem (How can citizens report ethical violations?) may include “online reporting system, e-mail, in-person, anonymously, on-the-record,” and so on. Possible solutions for the second part of the problem (How will reports be processed?) may include “daily by a newly appointed ethics officer, weekly by a nonpartisan nongovernment employee,” and so on. Possible solutions for the third part of the problem (How will reports be addressed?) may include “by a newly appointed ethics commission, by the accused’s supervisor, by the city manager,” and so on.
Step 4: Evaluate Solutions
During this step, solutions can be critically evaluated based on their credibility, completeness, and worth. Once the potential solutions have been narrowed based on more obvious differences in relevance and/or merit, the group should analyze each solution based on its potential effects—especially negative effects. Groups that are required to report the rationale for their decision or whose decisions may be subject to public scrutiny would be wise to make a set list of criteria for evaluating each solution. Additionally, solutions can be evaluated based on how well they fit with the group’s charge and the abilities of the group. To do this, group members may ask, “Does this solution live up to the original purpose or mission of the group?” and “Can the solution actually be implemented with our current resources and connections?” and “How will this solution be supported, funded, enforced, and assessed?” Secondary tensions and substantive conflict, two concepts discussed earlier, emerge during this step of problem solving, and group members will need to employ effective critical thinking and listening skills.
Decision making is part of the larger process of problem solving and it plays a prominent role in this step. While there are several fairly similar models for problem solving, there are many varied decision-making techniques that groups can use. For example, to narrow the list of proposed solutions, group members may decide by majority vote, by weighing the pros and cons, or by discussing them until a consensus is reached. There are also more complex decision-making models like the “six hats method,” which we will discuss later. Once the final decision is reached, the group leader or facilitator should confirm that the group is in agreement. It may be beneficial to let the group break for a while or even to delay the final decision until a later meeting to allow people time to evaluate it outside of the group context.
Step 5: Implement and Assess the Solution
Implementing the solution requires some advanced planning, and it should not be rushed unless the group is operating under strict time restraints or delay may lead to some kind of harm. Although some solutions can be implemented immediately, others may take days, months, or years. As was noted earlier, it may be beneficial for groups to poll those who will be affected by the solution as to their opinion of it or even to do a pilot test to observe the effectiveness of the solution and how people react to it. Before implementation, groups should also determine how and when they would assess the effectiveness of the solution by asking, “How will we know if the solution is working or not?” Since solution assessment will vary based on whether or not the group is disbanded, groups should also consider the following questions: If the group disbands after implementation, who will be responsible for assessing the solution? If the solution fails, will the same group reconvene or will a new group be formed?
Certain elements of the solution may need to be delegated out to various people inside and outside the group. Group members may also be assigned to implement a particular part of the solution based on their role in the decision making or because it connects to their area of expertise. Likewise, group members may be tasked with publicizing the solution or “selling” it to a particular group of stakeholders. Last, the group should consider its future. In some cases, the group will get to decide if it will stay together and continue working on other tasks or if it will disband. In other cases, outside forces determine the group’s fate.
Giving a group presentation requires that individual group members and the group as a whole solve many problems and make many decisions. Although having more people involved in a presentation increases logistical difficulties and has the potential to create more conflict, a well-prepared and well-delivered group presentation can be more engaging and effective than a typical presentation. The main problems facing a group giving a presentation are (1) dividing responsibilities, (2) coordinating schedules and time management, and (3) working out the logistics of the presentation delivery.
In terms of dividing responsibilities, assigning individual work at the first meeting and then trying to fit it all together before the presentation (which is what many college students do when faced with a group project) is not the recommended method. Integrating content and visual aids created by several different people into a seamless final product takes time and effort, and the person “stuck” with this job at the end usually ends up developing some resentment toward his or her group members. While it’s OK for group members to do work independently outside of group meetings, spend time working together to help set up some standards for content and formatting expectations that will help make later integration of work easier. Taking the time to complete one part of the presentation together can help set those standards for later individual work. Discuss the roles that various group members will play openly so there isn’t role confusion. There could be one point person for keeping track of the group’s progress and schedule, one point person for communication, one point person for content integration, one point person for visual aids, and so on. Each person shouldn’t do all that work on his or her own but help focus the group’s attention on his or her specific area during group meetings. Chaunce Stanton, “How to Deliver Group Presentations: The Unified Team Approach,” Six Minutes Speaking and Presentation Skills, November 3, 2009, accessed August 28, 2012, http://sixminutes.dlugan.com/group-presentations-unified-team-approach .
Scheduling group meetings is one of the most challenging problems groups face, given people’s busy lives. From the beginning, it should be clearly communicated that the group needs to spend considerable time in face-to-face meetings, and group members should know that they may have to make an occasional sacrifice to attend. Especially important is the commitment to scheduling time to rehearse the presentation. Consider creating a contract of group guidelines that includes expectations for meeting attendance to increase group members’ commitment.
Group presentations require members to navigate many logistics of their presentation. While it may be easier for a group to assign each member to create a five-minute segment and then transition from one person to the next, this is definitely not the most engaging method. Creating a master presentation and then assigning individual speakers creates a more fluid and dynamic presentation and allows everyone to become familiar with the content, which can help if a person doesn’t show up to present and during the question-and-answer section. Once the content of the presentation is complete, figure out introductions, transitions, visual aids, and the use of time and space. Chaunce Stanton, “How to Deliver Group Presentations: The Unified Team Approach,” Six Minutes Speaking and Presentation Skills, November 3, 2009, accessed August 28, 2012, http://sixminutes.dlugan.com/group-presentations-unified-team-approach . In terms of introductions, figure out if one person will introduce all the speakers at the beginning, if speakers will introduce themselves at the beginning, or if introductions will occur as the presentation progresses. In terms of transitions, make sure each person has included in his or her speaking notes when presentation duties switch from one person to the next. Visual aids have the potential to cause hiccups in a group presentation if they aren’t fluidly integrated. Practicing with visual aids and having one person control them may help prevent this. Know how long your presentation is and know how you’re going to use the space. Presenters should know how long the whole presentation should be and how long each of their segments should be so that everyone can share the responsibility of keeping time. Also consider the size and layout of the presentation space. You don’t want presenters huddled in a corner until it’s their turn to speak or trapped behind furniture when their turn comes around.
We all engage in personal decision making daily, and we all know that some decisions are more difficult than others. When we make decisions in groups, we face some challenges that we do not face in our personal decision making, but we also stand to benefit from some advantages of group decision making. Rodney W. Napier and Matti K. Gershenfeld, Groups: Theory and Experience, 7th ed. (Boston, MA: Houghton Mifflin, 2004), 292. Group decision making can appear fair and democratic but really only be a gesture that covers up the fact that certain group members or the group leader have already decided. Group decision making also takes more time than individual decisions and can be burdensome if some group members do not do their assigned work, divert the group with self-centered or unproductive role behaviors, or miss meetings. Conversely, though, group decisions are often more informed, since all group members develop a shared understanding of a problem through discussion and debate. The shared understanding may also be more complex and deep than what an individual would develop, because the group members are exposed to a variety of viewpoints that can broaden their own perspectives. Group decisions also benefit from synergy, one of the key advantages of group communication that we discussed earlier. Most groups do not use a specific method of decision making, perhaps thinking that they’ll work things out as they go. This can lead to unequal participation, social loafing, premature decisions, prolonged discussion, and a host of other negative consequences. So in this section we will learn some practices that will prepare us for good decision making and some specific techniques we can use to help us reach a final decision.
Before groups can make a decision, they need to generate possible solutions to their problem. The most commonly used method is brainstorming, although most people don’t follow the recommended steps of brainstorming. As you’ll recall, brainstorming refers to the quick generation of ideas free of evaluation. The originator of the term brainstorming said the following four rules must be followed for the technique to be effective:
To make brainstorming more of a decision-making method rather than an idea-generating method, group communication scholars have suggested additional steps that precede and follow brainstorming.
The nominal group technique guides decision making through a four-step process that includes idea generation and evaluation and seeks to elicit equal contributions from all group members. Andre L. Delbecq and Andrew H. Ven de Ven, “A Group Process Model for Problem Identification and Program Planning,” The Journal of Applied Behavioral Science 7, no. 4 (1971): 466–92. This method is useful because the procedure involves all group members systematically, which fixes the problem of uneven participation during discussions. Since everyone contributes to the discussion, this method can also help reduce instances of social loafing. To use the nominal group technique, do the following:
During the first step, have group members work quietly, in the same space, to write down every idea they have to address the task or problem they face. This shouldn’t take more than twenty minutes. Whoever is facilitating the discussion should remind group members to use brainstorming techniques, which means they shouldn’t evaluate ideas as they are generated. Ask group members to remain silent once they’ve finished their list so they do not distract others.
During the second step, the facilitator goes around the group in a consistent order asking each person to share one idea at a time. As the idea is shared, the facilitator records it on a master list that everyone can see. Keep track of how many times each idea comes up, as that could be an idea that warrants more discussion. Continue this process until all the ideas have been shared. As a note to facilitators, some group members may begin to edit their list or self-censor when asked to provide one of their ideas. To limit a person’s apprehension with sharing his or her ideas and to ensure that each idea is shared, I have asked group members to exchange lists with someone else so they can share ideas from the list they receive without fear of being personally judged.
During step three, the facilitator should note that group members can now ask for clarification on ideas on the master list. Do not let this discussion stray into evaluation of ideas. To help avoid an unnecessarily long discussion, it may be useful to go from one person to the next to ask which ideas need clarifying and then go to the originator(s) of the idea in question for clarification.
During the fourth step, members use a voting ballot to rank the acceptability of the ideas on the master list. If the list is long, you may ask group members to rank only their top five or so choices. The facilitator then takes up the secret ballots and reviews them in a random order, noting the rankings of each idea. Ideally, the highest ranked idea can then be discussed and decided on. The nominal group technique does not carry a group all the way through to the point of decision; rather, it sets the group up for a roundtable discussion or use of some other method to evaluate the merits of the top ideas.
Some decision-making techniques involve determining a course of action based on the level of agreement among the group members. These methods include majority, expert, authority, and consensus rule. Table 8.1 "Pros and Cons of Agreement-Based Decision-Making Techniques" reviews the pros and cons of each of these methods.
Majority rule is a commonly used decision-making technique in which a majority (one-half plus one) must agree before a decision is made. A show-of-hands vote, a paper ballot, or an electronic voting system can determine the majority choice. Many decision-making bodies, including the US House of Representatives, Senate, and Supreme Court, use majority rule to make decisions, which shows that it is often associated with democratic decision making, since each person gets one vote and each vote counts equally. Of course, other individuals and mediated messages can influence a person’s vote, but since the voting power is spread out over all group members, it is not easy for one person or party to take control of the decision-making process. In some cases—for example, to override a presidential veto or to amend the constitution—a super majority of two-thirds may be required to make a decision.
Minority rule is a decision-making technique in which a designated authority or expert has final say over a decision and may or may not consider the input of other group members. When a designated expert makes a decision by minority rule, there may be buy-in from others in the group, especially if the members of the group didn’t have relevant knowledge or expertise. When a designated authority makes decisions, buy-in will vary based on group members’ level of respect for the authority. For example, decisions made by an elected authority may be more accepted by those who elected him or her than by those who didn’t. As with majority rule, this technique can be time saving. Unlike majority rule, one person or party can have control over the decision-making process. This type of decision making is more similar to that used by monarchs and dictators. An obvious negative consequence of this method is that the needs or wants of one person can override the needs and wants of the majority. A minority deciding for the majority has led to negative consequences throughout history. The white Afrikaner minority that ruled South Africa for decades instituted apartheid, which was a system of racial segregation that disenfranchised and oppressed the majority population. The quality of the decision and its fairness really depends on the designated expert or authority.
Consensus rule is a decision-making technique in which all members of the group must agree on the same decision. On rare occasions, a decision may be ideal for all group members, which can lead to unanimous agreement without further debate and discussion. Although this can be positive, be cautious that this isn’t a sign of groupthink. More typically, consensus is reached only after lengthy discussion. On the plus side, consensus often leads to high-quality decisions due to the time and effort it takes to get everyone in agreement. Group members are also more likely to be committed to the decision because of their investment in reaching it. On the negative side, the ultimate decision is often one that all group members can live with but not one that’s ideal for all members. Additionally, the process of arriving at consensus also includes conflict, as people debate ideas and negotiate the interpersonal tensions that may result.
Decision-Making Technique | Pros | Cons |
---|---|---|
Majority rule | ||
Minority rule by expert | ||
Minority rule by authority | ||
Consensus rule |
Edward de Bono developed the Six Hats method of thinking in the late 1980s, and it has since become a regular feature in decision-making training in business and professional contexts. Edward de Bono, Six Thinking Hats (Boston, MA: Little, Brown, 1985). The method’s popularity lies in its ability to help people get out of habitual ways of thinking and to allow group members to play different roles and see a problem or decision from multiple points of view. The basic idea is that each of the six hats represents a different way of thinking, and when we figuratively switch hats, we switch the way we think. The hats and their style of thinking are as follows:
Specific sequences or combinations of hats can be used to encourage strategic thinking. For example, the group leader may start off wearing the Blue Hat and suggest that the group start their decision-making process with some “White Hat thinking” in order to process through facts and other available information. During this stage, the group could also process through what other groups have done when faced with a similar problem. Then the leader could begin an evaluation sequence starting with two minutes of “Yellow Hat thinking” to identify potential positive outcomes, then “Black Hat thinking” to allow group members to express reservations about ideas and point out potential problems, then “Red Hat thinking” to get people’s gut reactions to the previous discussion, then “Green Hat thinking” to identify other possible solutions that are more tailored to the group’s situation or completely new approaches. At the end of a sequence, the Blue Hat would want to summarize what was said and begin a new sequence. To successfully use this method, the person wearing the Blue Hat should be familiar with different sequences and plan some of the thinking patterns ahead of time based on the problem and the group members. Each round of thinking should be limited to a certain time frame (two to five minutes) to keep the discussion moving.
Many factors influence the decision-making process. For example, how might a group’s independence or access to resources affect the decisions they make? What potential advantages and disadvantages come with decisions made by groups that are more or less similar in terms of personality and cultural identities? In this section, we will explore how situational, personality, and cultural influences affect decision making in groups.
A group’s situational context affects decision making. One key situational element is the degree of freedom that the group has to make its own decisions, secure its own resources, and initiate its own actions. Some groups have to go through multiple approval processes before they can do anything, while others are self-directed, self-governing, and self-sustaining. Another situational influence is uncertainty. In general, groups deal with more uncertainty in decision making than do individuals because of the increased number of variables that comes with adding more people to a situation. Individual group members can’t know what other group members are thinking, whether or not they are doing their work, and how committed they are to the group. So the size of a group is a powerful situational influence, as it adds to uncertainty and complicates communication.
Access to information also influences a group. First, the nature of the group’s task or problem affects its ability to get information. Group members can more easily make decisions about a problem when other groups have similarly experienced it. Even if the problem is complex and serious, the group can learn from other situations and apply what it learns. Second, the group must have access to flows of information. Access to archives, electronic databases, and individuals with relevant experience is necessary to obtain any relevant information about similar problems or to do research on a new or unique problem. In this regard, group members’ formal and information network connections also become important situational influences.
The origin and urgency of a problem are also situational factors that influence decision making. In terms of origin, problems usually occur in one of four ways:
In each of the cases, the need for a decision may be more or less urgent depending on how badly something is going wrong, how high the expectations have been raised, or the degree to which people are fed up with a broken system. Decisions must be made in situations ranging from crisis level to mundane.
A long-studied typology of value orientations that affect decision making consists of the following types of decision maker: the economic, the aesthetic, the theoretical, the social, the political, and the religious.
In the United States, economic, political, and theoretical decision making tend to be more prevalent decision-making orientations, which likely corresponds to the individualistic cultural orientation with its emphasis on competition and efficiency. But situational context, as we discussed before, can also influence our decision making.
The personalities of group members, especially leaders and other active members, affect the climate of the group. Group member personalities can be categorized based on where they fall on a continuum anchored by the following descriptors: dominant/submissive, friendly/unfriendly, and instrumental/emotional. John F. Cragan and David W. Wright, Communication in Small Groups: Theory, Practice, Skills, 5th ed. (Belmont, CA: Wadsworth, 1999), 139. The more group members there are in any extreme of these categories, the more likely that the group climate will also shift to resemble those characteristics.
Just like neighborhoods, schools, and countries, small groups vary in terms of their degree of similarity and difference. Demographic changes in the United States and increases in technology that can bring different people together make it more likely that we will be interacting in more and more heterogeneous groups. Brenda J. Allen, Difference Matters: Communicating Social Identity, 2nd ed. (Long Grove, IL: Waveland, 2011), 5. Some small groups are more homogenous, meaning the members are more similar, and some are more heterogeneous, meaning the members are more different. Diversity and difference within groups has advantages and disadvantages. In terms of advantages, research finds that, in general, groups that are culturally heterogeneous have better overall performance than more homogenous groups. Beth Bonniwell Haslett and Jenn Ruebush, “What Differences Do Individual Differences in Groups Make?: The Effects of Individuals, Culture, and Group Composition,” in The Handbook of Group Communication Theory and Research, ed. Lawrence R. Frey (Thousand Oaks, CA: Sage, 1999), 133. Additionally, when group members have time to get to know each other and competently communicate across their differences, the advantages of diversity include better decision making due to different perspectives. David C. Thomas, “Cultural Diversity and Work Group Effectiveness: An Experimental Study,” Journal of Cross-Cultural Psychology 30, no. 2 (1999): 242–63. Unfortunately, groups often operate under time constraints and other pressures that make the possibility for intercultural dialogue and understanding difficult. The main disadvantage of heterogeneous groups is the possibility for conflict, but given that all groups experience conflict, this isn’t solely due to the presence of diversity. We will now look more specifically at how some of the cultural value orientations we’ve learned about already in this book can play out in groups with international diversity and how domestic diversity in terms of demographics can also influence group decision making.
Cultural value orientations such as individualism/collectivism, power distance, and high-/low-context communication styles all manifest on a continuum of communication behaviors and can influence group decision making. Group members from individualistic cultures are more likely to value task-oriented, efficient, and direct communication. This could manifest in behaviors such as dividing up tasks into individual projects before collaboration begins and then openly debating ideas during discussion and decision making. Additionally, people from cultures that value individualism are more likely to openly express dissent from a decision, essentially expressing their disagreement with the group. Group members from collectivistic cultures are more likely to value relationships over the task at hand. Because of this, they also tend to value conformity and face-saving (often indirect) communication. This could manifest in behaviors such as establishing norms that include periods of socializing to build relationships before task-oriented communication like negotiations begin or norms that limit public disagreement in favor of more indirect communication that doesn’t challenge the face of other group members or the group’s leader. In a group composed of people from a collectivistic culture, each member would likely play harmonizing roles, looking for signs of conflict and resolving them before they become public.
Power distance can also affect group interactions. Some cultures rank higher on power-distance scales, meaning they value hierarchy, make decisions based on status, and believe that people have a set place in society that is fairly unchangeable. Group members from high-power-distance cultures would likely appreciate a strong designated leader who exhibits a more directive leadership style and prefer groups in which members have clear and assigned roles. In a group that is homogenous in terms of having a high-power-distance orientation, members with higher status would be able to openly provide information, and those with lower status may not provide information unless a higher status member explicitly seeks it from them. Low-power-distance cultures do not place as much value and meaning on status and believe that all group members can participate in decision making. Group members from low-power-distance cultures would likely freely speak their mind during a group meeting and prefer a participative leadership style.
How much meaning is conveyed through the context surrounding verbal communication can also affect group communication. Some cultures have a high-context communication style in which much of the meaning in an interaction is conveyed through context such as nonverbal cues and silence. Group members from high-context cultures may avoid saying something directly, assuming that other group members will understand the intended meaning even if the message is indirect. So if someone disagrees with a proposed course of action, he or she may say, “Let’s discuss this tomorrow,” and mean, “I don’t think we should do this.” Such indirect communication is also a face-saving strategy that is common in collectivistic cultures. Other cultures have a low-context communication style that places more importance on the meaning conveyed through words than through context or nonverbal cues. Group members from low-context cultures often say what they mean and mean what they say. For example, if someone doesn’t like an idea, they might say, “I think we should consider more options. This one doesn’t seem like the best we can do.”
In any of these cases, an individual from one culture operating in a group with people of a different cultural orientation could adapt to the expectations of the host culture, especially if that person possesses a high degree of intercultural communication competence (ICC). Additionally, people with high ICC can also adapt to a group member with a different cultural orientation than the host culture. Even though these cultural orientations connect to values that affect our communication in fairly consistent ways, individuals may exhibit different communication behaviors depending on their own individual communication style and the situation.
While it is becoming more likely that we will interact in small groups with international diversity, we are guaranteed to interact in groups that are diverse in terms of the cultural identities found within a single country or the subcultures found within a larger cultural group.
Gender stereotypes sometimes influence the roles that people play within a group. For example, the stereotype that women are more nurturing than men may lead group members (both male and female) to expect that women will play the role of supporters or harmonizers within the group. Since women have primarily performed secretarial work since the 1900s, it may also be expected that women will play the role of recorder. In both of these cases, stereotypical notions of gender place women in roles that are typically not as valued in group communication. The opposite is true for men. In terms of leadership, despite notable exceptions, research shows that men fill an overwhelmingly disproportionate amount of leadership positions. We are socialized to see certain behaviors by men as indicative of leadership abilities, even though they may not be. For example, men are often perceived to contribute more to a group because they tend to speak first when asked a question or to fill a silence and are perceived to talk more about task-related matters than relationally oriented matters. Both of these tendencies create a perception that men are more engaged with the task. Men are also socialized to be more competitive and self-congratulatory, meaning that their communication may be seen as dedicated and their behaviors seen as powerful, and that when their work isn’t noticed they will be more likely to make it known to the group rather than take silent credit. Even though we know that the relational elements of a group are crucial for success, even in high-performance teams, that work is not as valued in our society as the task-related work.
Despite the fact that some communication patterns and behaviors related to our typical (and stereotypical) gender socialization affect how we interact in and form perceptions of others in groups, the differences in group communication that used to be attributed to gender in early group communication research seem to be diminishing. This is likely due to the changing organizational cultures from which much group work emerges, which have now had more than sixty years to adjust to women in the workplace. It is also due to a more nuanced understanding of gender-based research, which doesn’t take a stereotypical view from the beginning as many of the early male researchers did. Now, instead of biological sex being assumed as a factor that creates inherent communication differences, group communication scholars see that men and women both exhibit a range of behaviors that are more or less feminine or masculine. It is these gendered behaviors, and not a person’s gender, that seem to have more of an influence on perceptions of group communication. Interestingly, group interactions are still masculinist in that male and female group members prefer a more masculine communication style for task leaders and that both males and females in this role are more likely to adapt to a more masculine communication style. Conversely, men who take on social-emotional leadership behaviors adopt a more feminine communication style. In short, it seems that although masculine communication traits are more often associated with high status positions in groups, both men and women adapt to this expectation and are evaluated similarly.Beth Bonniwell Haslett and Jenn Ruebush, “What Differences Do Individual Differences in Groups Make?: The Effects of Individuals, Culture, and Group Composition,” in The Handbook of Group Communication Theory and Research, ed. Lawrence R. Frey (Thousand Oaks, CA: Sage, 1999), 122.
Other demographic categories are also influential in group communication and decision making. In general, group members have an easier time communicating when they are more similar than different in terms of race and age. This ease of communication can make group work more efficient, but the homogeneity may sacrifice some creativity. As we learned earlier, groups that are diverse (e.g., they have members of different races and generations) benefit from the diversity of perspectives in terms of the quality of decision making and creativity of output.
In terms of age, for the first time since industrialization began, it is common to have three generations of people (and sometimes four) working side by side in an organizational setting. Although four generations often worked together in early factories, they were segregated based on their age group, and a hierarchy existed with older workers at the top and younger workers at the bottom. Today, however, generations interact regularly, and it is not uncommon for an older person to have a leader or supervisor who is younger than him or her.Brenda J. Allen, Difference Matters: Communicating Social Identity, 2nd ed. (Long Grove, IL: Waveland, 2011), 176. The current generations in the US workplace and consequently in work-based groups include the following:
The benefits and challenges that come with diversity of group members are important to consider. Since we will all work in diverse groups, we should be prepared to address potential challenges in order to reap the benefits. Diverse groups may be wise to coordinate social interactions outside of group time in order to find common ground that can help facilitate interaction and increase group cohesion. We should be sensitive but not let sensitivity create fear of “doing something wrong” that then prevents us from having meaningful interactions.
IMAGES
VIDEO
COMMENTS
Identify possible solutions. After a group has amassed a quantity of ideas, it must then identify which ideas are feasible. A group must establish criteria for possible solutions. Criteria should inform whether a solution can bring about the desired changes without any foreseeable drawback and be implemented by the group or organization.
Step 1: Define the Problem. Define the problem by considering the three elements shared by every problem: the current undesirable situation, the goal or more desirable situation, and obstacles. At this stage, group members share what they know about the current situation, without proposing solutions or evaluating the information.
Explain the five steps of the group problem-solving process. ... taking a deliberate and systematic approach to problem solving has been shown to benefit group functioning and performance. A deliberate approach is especially beneficial for groups that do not have an established history of working together and will only be able to meet ...
Step 2: Analyze the Problem. During this step, a group should analyze the problem and the group's relationship to the problem. Whereas the first step involved exploring the "what" related to the problem, this step focuses on the "why.". At this stage, group members can discuss the potential causes of the difficulty.
Step 2. Analyze the Problem. During this step, the group should analyze the problem and the group's relationship to the problem. Whereas the first step involved exploring the "What" related to the problem, this step focuses on the "Why.". At this stage, group members can discuss the potential causes of the difficulty.
Learning Objective. Identify and describe how to implement seven steps for group problem-solving. No matter who you are or where you live, problems are an inevitable part of life. This is true for groups as well as for individuals. Some groups—especially work teams—are formed specifically to solve problems. Other groups encounter problems ...
Group Facilitation and Problem-Solving. Learn how to conduct meetings and facilitate groups. Section 1. Conducting Effective Meetings. Section 2. Developing Facilitation Skills. Section 3. Capturing What People Say: Tips for Recording a Meeting. Section 4.
In human groups, the most common case of direct interaction for solving problems takes the form of group discussions 18,19, where all group members can freely share ideas and strategies to tackle ...
This article proposes an "upstream" or preventive orientation to problem-solving group facilitation within organizations. The author recommends three major strategies: (1) facilitators should investigate contextual influences on the group well before the group first meets, (2) facilitators should help install norms that will enhance group problem solving, and (3) facilitators should then ...
In corporate business, education, or military, problem solving and decision making are commonly done in groups (Gupta, 2012). It is widely believed that group problem-solving and decision making is more efficient and optimal than individual problem solving because groups can process more information than an individual can (Stewart & Stasser, 1995).
Step 2: Analyze the Problem. During this step a group should analyze the problem and the group's relationship to the problem. Whereas the first step involved exploring the "what" related to the problem, this step focuses on the "why.". At this stage, group members can discuss the potential causes of the difficulty.
Group problem solving is the process of bringing together stakeholders who through their analytical decision making abilities can influence the outcome of the problem. The use of groups in problem solving is encouraged as groups tend to evaluate diverse solutions and action plans. The core objectives of the group are identifying the problem and ...
12.1 Group Problem Solving. Identify and describe how to implement seven steps for group problem- solving. No matter who you are or where you live, problems are an inevitable part of life. This is true for groups as well as for individuals. Some groups—especially work teams—are formed specifically to solve problems.
Even in disagreement, there's an understanding that the group is working together to resolve a dispute, solve a problem, create a plan, make a decision, find principles all can agree on, or come to a conclusion from which it can move on to further discussion; Many group discussions have no specific purpose except the exchange of ideas and ...
Step 2: Analyze the Problem. During this step a group should analyze the problem and the group's relationship to the problem. Whereas the first step involved exploring the "what" related to the problem, this step focuses on the "why.". At this stage, group members can discuss the potential causes of the difficulty.
A Systematic Approach to Problem Solving. The Journal of Business Education: Vol. 58, No. 7, pp. 263-265. (1983). A Systematic Approach to Problem Solving. The Journal of Business Education: Vol. 58, No. 7, pp. 263-265. ... Taylor and Francis Group Facebook page. Taylor and Francis Group Twitter page. Taylor and Francis Group Linkedin page.
Step 1: Define the Problem. Define the problem by considering the three elements shared by every problem: the current undesirable situation, the goal or more desirable situation, and obstacles in the way. At this stage, group members share what they know about the current situation, without proposing solutions or evaluating the information.
However, groups were found to need a great deal of control and coordination to enable members to collaborate effectively. Nevertheless, group decision making was found to receive little technological support. The available technology provided only low level support which mainly focused on supporting the asynchronous work of groups.
There are several factors that promote the effective problem solving, such as intellectual ability of the group members, the member's motivation to work cooperatively on the problem, and the diversity of the points of view and information relevant to the problem within the group. A formally appointed leader can also enhance a group's ...
Findings. First, the authors propose three problem-solving modes with different characteristics and potential impacts on operational performance: intuitive problem-solving, semi-structured problem-solving and systematic problem-solving. Second, by emphasizing dynamic capabilities' micro-foundations and with the focus on learning mechanisms, the ...
Step 2: Analyze the Problem. During this step a group should analyze the problem and the group's relationship to the problem. Whereas the first step involved exploring the "what" related to the problem, this step focuses on the "why.". At this stage, group members can discuss the potential causes of the difficulty.